6f18ce8026
Add snapshot of device tree bindings from keystone common kernel, branch
"android-mainline-keystone-qcom-release" at c4c12103f9c0 ("Snap for 9228065
from e32903b9a63bb558df8b803b076619c53c16baad to
android-mainline-keystone-qcom-release").
Change-Id: I7682079615cbd9f29340a5c1f2a1d84ec441a1f1
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
43 lines
1.1 KiB
Plaintext
43 lines
1.1 KiB
Plaintext
Cypress I2C Touchpad
|
|
|
|
Required properties:
|
|
- compatible: must be "cypress,cyapa".
|
|
- reg: I2C address of the chip.
|
|
- interrupts: interrupt to which the chip is connected (see interrupt
|
|
binding[0]).
|
|
|
|
Optional properties:
|
|
- wakeup-source: touchpad can be used as a wakeup source.
|
|
- pinctrl-names: should be "default" (see pinctrl binding [1]).
|
|
- pinctrl-0: a phandle pointing to the pin settings for the device (see
|
|
pinctrl binding [1]).
|
|
- vcc-supply: a phandle for the regulator supplying 3.3V power.
|
|
|
|
[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
|
|
[1]: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
|
|
|
|
Example:
|
|
&i2c0 {
|
|
/* ... */
|
|
|
|
/* Cypress Gen3 touchpad */
|
|
touchpad@67 {
|
|
compatible = "cypress,cyapa";
|
|
reg = <0x67>;
|
|
interrupt-parent = <&gpio>;
|
|
interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO 2 */
|
|
wakeup-source;
|
|
};
|
|
|
|
/* Cypress Gen5 and later touchpad */
|
|
touchpad@24 {
|
|
compatible = "cypress,cyapa";
|
|
reg = <0x24>;
|
|
interrupt-parent = <&gpio>;
|
|
interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO 2 */
|
|
wakeup-source;
|
|
};
|
|
|
|
/* ... */
|
|
};
|