6f18ce8026
Add snapshot of device tree bindings from keystone common kernel, branch
"android-mainline-keystone-qcom-release" at c4c12103f9c0 ("Snap for 9228065
from e32903b9a63bb558df8b803b076619c53c16baad to
android-mainline-keystone-qcom-release").
Change-Id: I7682079615cbd9f29340a5c1f2a1d84ec441a1f1
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
78 lines
1.8 KiB
YAML
78 lines
1.8 KiB
YAML
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/i2c/nuvoton,npcm7xx-i2c.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: nuvoton NPCM7XX I2C Controller
|
|
|
|
description: |
|
|
I2C bus controllers of the NPCM series support both master and
|
|
slave mode. Each controller can switch between master and slave at run time
|
|
(i.e. IPMB mode). HW FIFO for TX and RX are supported.
|
|
|
|
maintainers:
|
|
- Tali Perry <tali.perry1@gmail.com>
|
|
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- nuvoton,npcm750-i2c
|
|
- nuvoton,npcm845-i2c
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
clocks:
|
|
maxItems: 1
|
|
description: Reference clock for the I2C bus
|
|
|
|
clock-frequency:
|
|
description: Desired I2C bus clock frequency in Hz. If not specified,
|
|
the default 100 kHz frequency will be used.
|
|
possible values are 100000, 400000 and 1000000.
|
|
default: 100000
|
|
enum: [100000, 400000, 1000000]
|
|
|
|
nuvoton,sys-mgr:
|
|
$ref: /schemas/types.yaml#/definitions/phandle
|
|
description: The phandle of system manager register node.
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- interrupts
|
|
- clocks
|
|
|
|
allOf:
|
|
- $ref: /schemas/i2c/i2c-controller.yaml#
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
const: nuvoton,npcm845-i2c
|
|
|
|
then:
|
|
required:
|
|
- nuvoton,sys-mgr
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/clock/nuvoton,npcm7xx-clock.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
i2c0: i2c@80000 {
|
|
reg = <0x80000 0x1000>;
|
|
clocks = <&clk NPCM7XX_CLK_APB2>;
|
|
clock-frequency = <100000>;
|
|
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
|
|
compatible = "nuvoton,npcm750-i2c";
|
|
nuvoton,sys-mgr = <&gcr>;
|
|
};
|
|
|
|
...
|