6f18ce8026
Add snapshot of device tree bindings from keystone common kernel, branch
"android-mainline-keystone-qcom-release" at c4c12103f9c0 ("Snap for 9228065
from e32903b9a63bb558df8b803b076619c53c16baad to
android-mainline-keystone-qcom-release").
Change-Id: I7682079615cbd9f29340a5c1f2a1d84ec441a1f1
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
27 lines
866 B
Plaintext
27 lines
866 B
Plaintext
Nintendo Wii (Hollywood) GPIO controller
|
|
|
|
Required properties:
|
|
- compatible: "nintendo,hollywood-gpio"
|
|
- reg: Physical base address and length of the controller's registers.
|
|
- gpio-controller: Marks the device node as a GPIO controller.
|
|
- #gpio-cells: Should be <2>. The first cell is the pin number and the
|
|
second cell is used to specify optional parameters:
|
|
- bit 0 specifies polarity (0 for normal, 1 for inverted).
|
|
|
|
Optional properties:
|
|
- ngpios: see Documentation/devicetree/bindings/gpio/gpio.txt
|
|
- interrupt-controller: Marks the device node as an interrupt controller.
|
|
- #interrupt-cells: Should be two.
|
|
- interrupts: Interrupt specifier for the controller's Broadway (PowerPC)
|
|
interrupt.
|
|
|
|
Example:
|
|
|
|
GPIO: gpio@d8000c0 {
|
|
#gpio-cells = <2>;
|
|
compatible = "nintendo,hollywood-gpio";
|
|
reg = <0x0d8000c0 0x40>;
|
|
gpio-controller;
|
|
ngpios = <24>;
|
|
}
|