6f18ce8026
Add snapshot of device tree bindings from keystone common kernel, branch
"android-mainline-keystone-qcom-release" at c4c12103f9c0 ("Snap for 9228065
from e32903b9a63bb558df8b803b076619c53c16baad to
android-mainline-keystone-qcom-release").
Change-Id: I7682079615cbd9f29340a5c1f2a1d84ec441a1f1
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
39 lines
1.2 KiB
Plaintext
39 lines
1.2 KiB
Plaintext
Lantiq SoC External Bus memory mapped GPIO controller
|
|
|
|
By attaching hardware latches to the EBU it is possible to create output
|
|
only gpios. This driver configures a special memory address, which when
|
|
written to outputs 16 bit to the latches.
|
|
|
|
The node describing the memory mapped GPIOs needs to be a child of the node
|
|
describing the "lantiq,localbus".
|
|
|
|
Required properties:
|
|
- compatible : Should be "lantiq,gpio-mm-lantiq"
|
|
- reg : Address and length of the register set for the device
|
|
- #gpio-cells : Should be two. The first cell is the pin number and
|
|
the second cell is used to specify optional parameters (currently
|
|
unused).
|
|
- gpio-controller : Marks the device node as a gpio controller.
|
|
|
|
Optional properties:
|
|
- lantiq,shadow : The default value that we shall assume as already set on the
|
|
shift register cascade.
|
|
|
|
Example:
|
|
|
|
localbus@0 {
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
|
|
1 0 0x4000000 0x4000010>; /* addsel1 */
|
|
compatible = "lantiq,localbus", "simple-bus";
|
|
|
|
gpio_mm0: gpio@4000000 {
|
|
compatible = "lantiq,gpio-mm";
|
|
reg = <1 0x0 0x10>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
lantiq,shadow = <0x77f>
|
|
};
|
|
}
|