6f18ce8026
Add snapshot of device tree bindings from keystone common kernel, branch
"android-mainline-keystone-qcom-release" at c4c12103f9c0 ("Snap for 9228065
from e32903b9a63bb558df8b803b076619c53c16baad to
android-mainline-keystone-qcom-release").
Change-Id: I7682079615cbd9f29340a5c1f2a1d84ec441a1f1
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
36 lines
1.3 KiB
Plaintext
36 lines
1.3 KiB
Plaintext
NVIDIA Tegra210 Boot and Power Management Processor (BPMP)
|
|
|
|
The Boot and Power Management Processor (BPMP) is a co-processor found
|
|
in Tegra210 SoC. It is designed to handle the early stages of the boot
|
|
process as well as to assisting in entering deep low power state
|
|
(suspend to ram), and also offloading DRAM memory clock scaling on
|
|
some platforms. The binding document defines the resources that would
|
|
be used by the BPMP T210 firmware driver, which can create the
|
|
interprocessor communication (IPC) between the CPU and BPMP.
|
|
|
|
Required properties:
|
|
- compatible
|
|
Array of strings
|
|
One of:
|
|
- "nvidia,tegra210-bpmp"
|
|
- reg: physical base address and length for HW synchornization primitives
|
|
1) base address and length to Tegra 'atomics' hardware
|
|
2) base address and length to Tegra 'semaphore' hardware
|
|
- interrupts: specifies the interrupt number for receiving messages ("rx")
|
|
and for triggering messages ("tx")
|
|
|
|
Optional properties:
|
|
- #clock-cells : Should be 1 for platforms where DRAM clock control is
|
|
offloaded to bpmp.
|
|
|
|
Example:
|
|
|
|
bpmp@70016000 {
|
|
compatible = "nvidia,tegra210-bpmp";
|
|
reg = <0x0 0x70016000 0x0 0x2000
|
|
0x0 0x60001000 0x0 0x1000>;
|
|
interrupts = <GIC_SPI 6 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
|
|
interrupt-names = "tx", "rx";
|
|
};
|