6f18ce8026
Add snapshot of device tree bindings from keystone common kernel, branch
"android-mainline-keystone-qcom-release" at c4c12103f9c0 ("Snap for 9228065
from e32903b9a63bb558df8b803b076619c53c16baad to
android-mainline-keystone-qcom-release").
Change-Id: I7682079615cbd9f29340a5c1f2a1d84ec441a1f1
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
23 lines
693 B
Plaintext
23 lines
693 B
Plaintext
Sitronix ST7586 display panel
|
|
|
|
Required properties:
|
|
- compatible: "lego,ev3-lcd".
|
|
- a0-gpios: The A0 signal (since this binding is for serial mode, this is
|
|
the pin labeled D1 on the controller, not the pin labeled A0)
|
|
- reset-gpios: Reset pin
|
|
|
|
The node for this driver must be a child node of a SPI controller, hence
|
|
all mandatory properties described in ../spi/spi-bus.txt must be specified.
|
|
|
|
Optional properties:
|
|
- rotation: panel rotation in degrees counter clockwise (0,90,180,270)
|
|
|
|
Example:
|
|
display@0{
|
|
compatible = "lego,ev3-lcd";
|
|
reg = <0>;
|
|
spi-max-frequency = <10000000>;
|
|
a0-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>;
|
|
reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>;
|
|
};
|