# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/power/supply/qcom,battery-charger.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Qualcomm Technologies, Inc. Battery Charger Glink Device

maintainers:
  - Subbaraman Narayanamurthy <quic_subbaram@quicinc.com>

description: |
  This binding describes the Qualcomm Technologies, Inc. battery charger device.
  The QTI battery charger gets and sets power supply properties by communicating
  with charger firmware running on a remote subsystem (e.g. DSP) over PMIC
  Glink.

properties:
  compatible:
    const: qcom,battery-charger

  qcom,thermal-mitigation:
    description: |
      Array of fast charge current limit values for different system thermal
      mitigation levels. This should be a flat array that denotes the maximum
      charging current (in uA) for each thermal level. Elements should be listed
      in monotonically decreasing (non-increasing) order.
    $ref: /schemas/types.yaml#/definitions/uint32-array

  qcom,thermal-mitigation-step:
    description: |
      Fast charging current step (in uA) which if specified would be used to
      calculate different system thermal mitigation levels based on the maximum
      charging current provided by the charger firmware. This property can be
      specified only if "qcom,thermal-mitigation" property is not specified.
    $ref: /schemas/types.yaml#/definitions/uint32
    minimum: 500000

  qcom,wireless-fw-name:
    description: |
      Firmware name that is used for updating wireless charger firmware.
    $ref: /schemas/types.yaml#/definitions/string

  qcom,shutdown-voltage:
    description: |
      Battery voltage (in mV) when shutdown needs to be initiated when battery
      SOC reaches 0 and device is not charging.
    $ref: /schemas/types.yaml#/definitions/uint32

  qcom,display-panels:
    description: |
      Array of one or more phandles of the display panel(s) that sends the DRM
      blank/unblank notifications.
    $ref: /schemas/types.yaml#/definitions/phandle-array
    minItems: 1

  qcom,ship-mode-immediate:
    description: |
      Flag indicating that ship mode will be configured immediately and enabled
      after shut down is initiated.
    $ref: /schemas/types.yaml#/definitions/flag

required:
  - compatible

allOf:
  - if:
      required:
        - qcom,thermal-mitigation
    then:
      properties:
        qcom,thermal-mitigation-step: false

  - if:
      required:
        - qcom,thermal-mitigation-step
    then:
      properties:
        qcom,thermal-mitigation: false

additionalProperties: false

examples:
  - |
    pmic_glink {
      battery_charger {
        compatible = "qcom,battery-charger";
        qcom,thermal-mitigation = <3000000 1500000 1000000 500000>;
        qcom,wireless-fw-name = "idt9412.bin";
        qcom,shutdown-voltage = <3100>;
      };
    };