# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/qcom,monaco-tlmm.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Qualcomm Technologies, Inc. Monaco TLMM block

maintainers:
  - Pradnya Dahiwale <quic_pdahiwal@quicinc.com>
description: |
  This binding describes the Top Level Mode Multiplexer (TLMM) block found
  in the Monaco platform.

allOf:
  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
properties:
  compatible:
    const: "qcom,monaco-tlmm"

  reg:
    maxItems: 1

  interrupts: true
  interrupt-controller: true
  '#interrupt-cells': true
  gpio-controller: true

  gpio-reserved-ranges:
    minItems: 1
    maxItems: 105

  gpio-line-names:
    maxItems: 112

  '#gpio-cells': true
  gpio-ranges: true
  wakeup-parent: true

required:
  - compatible
  - reg

additionalProperties: false

# PIN CONFIGURATION NODES:
patternProperties:
  '-state$':
    oneOf:
      - $ref: "#/$defs/qcom-monaco-tlmm-state"
      - patternProperties:
          "-pins$":
            $ref: "#/$defs/qcom-monaco-tlmm-state"
        additionalProperties: false
$defs:
  qcom-monaco-tlmm-state:
    type: object
    description:
      Pinctrl node's client devices use subnodes for desired pin configuration.
      Client device subnodes use below standard properties.

    properties:
      pins:
        description:
          List of gpio pins affected by the properties specified in
          this subnode.
        items:
          oneOf:
            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-9])"
            - enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ]
        minItems: 1
        maxItems: 36
      function:
        description:
          Specify the alternative function to be configured for the
          specified pins. Functions are only valid for gpio pins.
        enum: [ AGERA_PLL, CCI_TIMER0, CCI_TIMER1, CCI_TIMER2, CCI_TIMER3,
                CRI_TRNG, CRI_TRNG0, CRI_TRNG1, GCC_GP1, GCC_GP2, GCC_GP3,
		GP_PDM0, GP_PDM1, GP_PDM2, JITTER_BIST, PA_INDICATOR, PLL_BIST,
                QUP0_L0, QUP0_L1, QUP0_L2, QUP0_L3, SDC1_TB, SDC2_TB,
                SSBI_WTR1, adsp_ext, atest_bbrx0, atest_bbrx1, atest_char,
                atest_char0, atest_char1, atest_char2, atest_char3,
                atest_gpsadc_dtest0_native, atest_gpsadc_dtest1_native,
                atest_tsens, atest_tsens2, atest_usb1, atest_usb10,
                atest_usb11, atest_usb12, atest_usb13, atest_usb2,
                atest_usb20, atest_usb21, atest_usb22, atest_usb23,
                cam_mclk, cci_async, cci_i2c, dac_calib0, dac_calib1,
                dac_calib10, dac_calib11, dac_calib12, dac_calib13,
                dac_calib14, dac_calib15, dac_calib16, dac_calib17,
                dac_calib18, dac_calib19, dac_calib2, dac_calib20,
                dac_calib21, dac_calib22, dac_calib23, dac_calib24,
                dac_calib25, dac_calib3, dac_calib4, dac_calib5,
                dac_calib6, dac_calib7, dac_calib8, dac_calib9,
                dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, ddr_pxi2,
                ddr_pxi3, gsm0_tx, gsm1_tx, m_voc, mdp_vsync, mpm_pwr,
                nav_gpio0, nav_gpio1, nav_gpio2, pbs0, pbs1, pbs10,
                pbs11, pbs12, pbs13, pbs14, pbs15, pbs2, pbs3, pbs4,
                pbs5, pbs6, pbs7, pbs8, pbs9, pbs_out, phase_flag0,
                phase_flag1, phase_flag10, phase_flag11, phase_flag12,
                phase_flag13, phase_flag14, phase_flag15, phase_flag16,
                phase_flag17, phase_flag18, phase_flag19, phase_flag2,
                phase_flag20, phase_flag21, phase_flag22, phase_flag23,
                phase_flag24, phase_flag25, phase_flag26, phase_flag27,
                phase_flag28, phase_flag29, phase_flag3, phase_flag30,
                phase_flag31, phase_flag4, phase_flag5, phase_flag6,
                phase_flag7, phase_flag8, phase_flag9, pll_bypassnl,
                pll_clk, pll_reset, prng_rosc0, prng_rosc1, prng_rosc2,
                prng_rosc3, pwm_0, pwm_1, pwm_2, pwm_3, pwm_4, pwm_5,
                pwm_6, pwm_7, pwm_8, pwm_9, qdss_cti, qdss_gpio,
                qdss_gpio0, qdss_gpio1, qdss_gpio10, qdss_gpio11,
                qdss_gpio12, qdss_gpio13, qdss_gpio14, qdss_gpio15,
                qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5,
                qdss_gpio6, qdss_gpio7, qdss_gpio8, qdss_gpio9,
                qup00, qup01, qup02, qup03, qup04, qup05, qup06,
                sdc3_clk, sdc3_cmd, sdc3_data, tgu_ch0, tgu_ch1
                tgu_ch2, tgu_ch3, tsense_pwm, uim0_clk, uim0_data,
                uim0_present, uim0_reset, usb2phy_ac, vfr_1,
                vsense_trigger, wci_uart, wlan1_adc0, wlan1_adc1]


      bias-disable: true
      bias-pull-down: true
      bias-pull-up: true
      drive-strength: true
      input-enable: true
      output-high: true
      output-low: true

    required:
      - pins

    allOf:
      - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
      - if:
          properties:
            pins:
              pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-9])$"
        then:
          required:
            - function

    additionalProperties: false

examples:
  - |
    tlmm: pinctrl@500000 {
      compatible = "qcom,monaco-pinctrl";
      reg = <0x500000 0x300000>;
      interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
      gpio-controller;
      #gpio-cells = <2>;
      interrupt-controller;
      #interrupt-cells = <2>;
    };