// SPDX-License-Identifier: BSD-3-Clause
/*
 * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
 */

#include <dt-bindings/msm-camera.h>
&soc {
	led_flash_triple_rear_wide: qcom,camera-flash1 {
		cell-index = <1>;
		compatible = "qcom,camera-flash";
		flash-source = <&pmxr2230_flash0 &pmxr2230_flash1>;
		torch-source = <&pmxr2230_torch0 &pmxr2230_torch1>;
		switch-source = <&pmxr2230_switch2>;
		status = "ok";
	};

	led_flash_triple_rear_tele: qcom,camera-flash2 {
		cell-index = <2>;
		compatible = "qcom,camera-flash";
		flash-source = <&pmxr2230_flash0 &pmxr2230_flash1>;
		torch-source = <&pmxr2230_torch0 &pmxr2230_torch1>;
		switch-source = <&pmxr2230_switch2>;
		status = "ok";
	};

	led_flash_triple_rear_ultrawide: qcom,camera-flash3 {
		cell-index = <3>;
		compatible = "qcom,camera-flash";
		flash-source = <&pmxr2230_flash0 &pmxr2230_flash1>;
		torch-source = <&pmxr2230_torch0 &pmxr2230_torch1>;
		switch-source = <&pmxr2230_switch2>;
		status = "ok";
	};

	qcom,cam-res-mgr {
		compatible = "qcom,cam-res-mgr";
		status = "ok";
	};
};

&cam_cci0 {
	actuator_triple_wide: qcom,actuator2 {
		cell-index = <2>;
		compatible = "qcom,actuator";
		cci-master = <CCI_MASTER_1>;
		cam_vaf-supply = <&L7M>;
		regulator-names = "cam_vaf";
		rgltr-cntrl-support;
		rgltr-min-voltage = <2800000>;
		rgltr-max-voltage = <3000000>;
		rgltr-load-current = <118930>;
		status = "ok";
	};

	/* Actuator (UW) */
	actuator_triple_uw: qcom,actuator1 {
		cell-index = <1>;
		compatible = "qcom,actuator";
		cci-master = <CCI_MASTER_0>;
		cam_vaf-supply = <&L7M>;
		regulator-names = "cam_vaf";
		rgltr-cntrl-support;
		rgltr-min-voltage = <2800000>;
		rgltr-max-voltage = <3000000>;
		rgltr-load-current = <103360>;
		status = "ok";
	};

	/* OIS (W) */
	ois_wide: qcom,ois0 {
		cell-index = <2>;
		compatible = "qcom,ois";
		cci-master = <CCI_MASTER_1>;
		cam_vio-supply = <&L5N>;
		cam_vaf-supply = <&L7M>;
		cam_clk-supply = <&cam_cc_titan_top_gdsc>;
		regulator-names = "cam_vio","cam_vaf", "cam_clk";
		rgltr-cntrl-support;
		rgltr-min-voltage = <1800000 2800000 0>;
		rgltr-max-voltage = <1980000 3000000 0>;
		rgltr-load-current = <3500 220000 0>;
		status = "ok";
	};

	/* EEPROM (W) */
	eeprom_wide: qcom,eeprom2 {
		cell-index = <2>;
		compatible = "qcom,eeprom";
		cam_vio-supply = <&L5N>;
		cam_vdig-supply = <&L1N>;
		cam_clk-supply = <&cam_cc_titan_top_gdsc>;
		cam_vana-supply = <&L6M>;
		cam_vaf-supply = <&L7M>;
		cam_v_custom1-supply = <&L3N>;
		regulator-names = "cam_vio", "cam_vdig", "cam_clk", "cam_vana",
			"cam_vaf", "cam_v_custom1";
		rgltr-cntrl-support;
		rgltr-min-voltage = <1800000 1104000 0 2800000 2800000 1800000>;
		rgltr-max-voltage = <1980000 1200000 0 2900000 3000000 1900000>;
		rgltr-load-current = <3500 913200 0 91430 118930 63100>;
		gpio-no-mux = <0>;
		pinctrl-names = "cam_default", "cam_suspend";
		pinctrl-0 = <&cam_sensor_mclk1_active
				&cam_sensor_active_rst1>;
		pinctrl-1 = <&cam_sensor_mclk1_suspend
				&cam_sensor_suspend_rst1>;
		gpios = <&tlmm 66 0>,
			<&tlmm 124 0>;
		gpio-reset = <1>;
		gpio-req-tbl-num = <0 1>;
		gpio-req-tbl-flags = <1 0>;
		gpio-req-tbl-label = "CAMIF_MCLK1",
					"CAM_RESET1";
		cci-master = <CCI_MASTER_1>;
		clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK1_CLK>;
		clock-names = "cam_clk";
		clock-cntl-level = "nominal";
		clock-rates = <24000000>;
		status = "ok";
	};

	/* EEPROM (UW) */
	eeprom_uw: qcom,eeprom1 {
		cell-index = <1>;
		compatible = "qcom,eeprom";
		cam_vio-supply = <&L5N>;
		cam_vdig-supply = <&L1M>;
		cam_clk-supply = <&cam_cc_titan_top_gdsc>;
		cam_vana-supply = <&L3M>;
		cam_vaf-supply = <&L7M>;
		regulator-names = "cam_vio", "cam_vdig", "cam_clk", "cam_vana",
			"cam_vaf";
		rgltr-cntrl-support;
		rgltr-min-voltage = <1800000 1100000 0 2800000 2800000>;
		rgltr-max-voltage = <1980000 1200000 0 2900000 3000000>;
		rgltr-load-current = <4060 523640 0 107500 103360>;
		gpio-no-mux = <0>;
		pinctrl-names = "cam_default", "cam_suspend";
		pinctrl-0 = <&cam_sensor_mclk0_active
				&cam_sensor_active_rst0>;
		pinctrl-1 = <&cam_sensor_mclk0_suspend
				&cam_sensor_suspend_rst0>;
		gpios = <&tlmm 65 0>,
			<&tlmm 123 0>;
		gpio-reset = <1>;
		gpio-req-tbl-num = <0 1>;
		gpio-req-tbl-flags = <1 0>;
		gpio-req-tbl-label = "CAMIF_MCLK0",
					"CAM_RESET0";
		cci-master = <CCI_MASTER_0>;
		clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK0_CLK>;
		clock-names = "cam_clk";
		clock-cntl-level = "nominal";
		clock-rates = <24000000>;
		status = "ok";
	};

	/* IMX858 (UWide) */
	qcom,cam-sensor1 {
		cell-index = <1>;
		compatible = "qcom,cam-sensor";
		csiphy-sd-index = <0>;
		sensor-position-roll = <90>;
		sensor-position-pitch = <0>;
		sensor-position-yaw = <180>;
		eeprom-src = <&eeprom_uw>;
		actuator-src = <&actuator_triple_uw>;
		led-flash-src = <&led_flash_triple_rear_ultrawide>;
		cam_vio-supply = <&L5N>;
		cam_vdig-supply = <&L1M>;
		cam_clk-supply = <&cam_cc_titan_top_gdsc>;
		cam_vana-supply = <&L3M>;
		cam_vaf-supply = <&L7M>;
		regulator-names = "cam_vio", "cam_vdig", "cam_clk", "cam_vana",
			"cam_vaf";
		rgltr-cntrl-support;
		rgltr-min-voltage = <1800000 1100000 0 2800000 2800000>;
		rgltr-max-voltage = <1980000 1200000 0 2900000 3000000>;
		rgltr-load-current = <4060 523640 0 107500 103360>;
		gpio-no-mux = <0>;
		pinctrl-names = "cam_default", "cam_suspend";
		pinctrl-0 = <&cam_sensor_mclk0_active
				 &cam_sensor_active_rst0>;
		pinctrl-1 = <&cam_sensor_mclk0_suspend
				 &cam_sensor_suspend_rst0>;
		gpios = <&tlmm 65 0>,
			<&tlmm 123 0>;
		gpio-reset = <1>;
		gpio-req-tbl-num = <0 1>;
		gpio-req-tbl-flags = <1 0>;
		gpio-req-tbl-label = "CAMIF_MCLK0",
					"CAM_RESET0";
		cci-master = <CCI_MASTER_0>;
		clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK0_CLK>;
		clock-names = "cam_clk";
		clock-cntl-level = "nominal";
		clock-rates = <24000000>;
		status = "ok";
	};

	/* IMX766 + OIS (Wide) */
	qcom,cam-sensor2 {
		cell-index = <2>;
		compatible = "qcom,cam-sensor";
		csiphy-sd-index = <1>;
		sensor-position-roll = <90>;
		sensor-position-pitch = <0>;
		sensor-position-yaw = <180>;
		eeprom-src = <&eeprom_wide>;
		ois-src = <&ois_wide>;
		actuator-src = <&actuator_triple_wide>;
		led-flash-src = <&led_flash_triple_rear_wide>;
		cam_vio-supply = <&L5N>;
		cam_vdig-supply = <&L1N>;
		cam_clk-supply = <&cam_cc_titan_top_gdsc>;
		cam_vana-supply = <&L6M>;
		cam_vaf-supply = <&L7M>;
		cam_v_custom1-supply = <&L3N>;
		regulator-names = "cam_vio", "cam_vdig", "cam_clk", "cam_vana",
			"cam_vaf", "cam_v_custom1";
		rgltr-cntrl-support;
		rgltr-min-voltage = <1800000 1104000 0 2800000 2800000 1800000>;
		rgltr-max-voltage = <1980000 1200000 0 2900000 3000000 1900000>;
		rgltr-load-current = <3500 913200 0 91430 118930 63100>;
		gpio-no-mux = <0>;
		pinctrl-names = "cam_default", "cam_suspend";
		pinctrl-0 = <&cam_sensor_mclk1_active
				 &cam_sensor_active_rst1>;
		pinctrl-1 = <&cam_sensor_mclk1_suspend
				 &cam_sensor_suspend_rst1>;
		gpios = <&tlmm 66 0>,
			<&tlmm 124 0>;
		gpio-reset = <1>;
		gpio-req-tbl-num = <0 1>;
		gpio-req-tbl-flags = <1 0>;
		gpio-req-tbl-label = "CAMIF_MCLK1",
					"CAM_RESET1";
		cci-master = <CCI_MASTER_1>;
		clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK1_CLK>;
		clock-names = "cam_clk";
		clock-cntl-level = "nominal";
		clock-rates = <24000000>;
		status = "ok";
	};
};

&cam_cci1 {
	/* Actuator (Tele) */
	actuator_triple_tele: qcom,actuator3 {
		cell-index = <3>;
		compatible = "qcom,actuator";
		cci-master = <CCI_MASTER_0>;
		cam_vaf-supply = <&L7M>;
		regulator-names = "cam_vaf";
		rgltr-cntrl-support;
		rgltr-min-voltage = <2800000>;
		rgltr-max-voltage = <3000000>;
		rgltr-load-current = <130040>;
		status = "ok";
	};

	/* EEPROM (Tele) */
	eeprom_tele: qcom,eeprom3 {
		cell-index = <3>;
		compatible = "qcom,eeprom";
		cam_vio-supply = <&L5N>;
		cam_vdig-supply = <&L2M>;
		cam_clk-supply = <&cam_cc_titan_top_gdsc>;
		cam_vana-supply = <&L4M>;
		cam_vaf-supply = <&L7M>;
		regulator-names = "cam_vio", "cam_vdig", "cam_clk",
			"cam_vana", "cam_vaf";
		rgltr-cntrl-support;
		rgltr-min-voltage = <1800000 1056000 0 2800000 2800000>;
		rgltr-max-voltage = <1980000 1150000 0 2900000 3000000>;
		rgltr-load-current = <4500 266330 0 69000 130040>;
		gpio-no-mux = <0>;
		pinctrl-names = "cam_default", "cam_suspend";
		pinctrl-0 = <&cam_sensor_mclk2_active
				 &cam_sensor_active_rst2>;
		pinctrl-1 = <&cam_sensor_mclk2_suspend
				 &cam_sensor_suspend_rst2>;
		gpios = <&tlmm 67 0>,
			<&tlmm 125 0>;
		gpio-reset = <1>;
		gpio-req-tbl-num = <0 1>;
		gpio-req-tbl-flags = <1 0>;
		gpio-req-tbl-label = "CAMIF_MCLK2",
					"CAM_RESET2";
		cci-master = <CCI_MASTER_0>;
		clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK2_CLK>;
		clock-names = "cam_clk";
		clock-cntl-level = "nominal";
		clock-rates = <24000000>;
		status = "ok";
	};

	/* EEPROM (Front) */
	eeprom_front: qcom,eeprom4 {
		cell-index = <4>;
		compatible = "qcom,eeprom";
		cam_vio-supply = <&L5N>;
		cam_vdig-supply = <&L2N>;
		cam_clk-supply = <&cam_cc_titan_top_gdsc>;
		cam_vana-supply = <&L6N>;
		cam_v_custom1-supply = <&L4N>;
		regulator-names = "cam_vio", "cam_vdig","cam_clk", "cam_vana",
			"cam_v_custom1";
		rgltr-cntrl-support;
		rgltr-min-voltage = <1800000 1056000 0 2800000 1800000>;
		rgltr-max-voltage = <1980000 1150000 0 2900000 1900000>;
		rgltr-load-current = <5560 454290 0 77860 29440>;
		gpio-no-mux = <0>;
		pinctrl-names = "cam_default", "cam_suspend";
		pinctrl-0 = <&cam_sensor_mclk3_active
					&cam_sensor_active_rst3>;
		pinctrl-1 = <&cam_sensor_mclk3_suspend
					&cam_sensor_suspend_rst3>;
		gpios = <&tlmm 68 0>,
			<&tlmm 126 0>;
		gpio-reset = <1>;
		gpio-req-tbl-num = <0 1>;
		gpio-req-tbl-flags = <1 0>;
		gpio-req-tbl-label = "CAMIF_MCLK3",
					"CAM_RESET3";
		cci-master = <CCI_MASTER_1>;
		clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK3_CLK>;
		clock-names = "cam_clk";
		clock-cntl-level = "nominal";
		clock-rates = <24000000>;
		status = "ok";
	};

	/* IMX688 (Front) */
	qcom,cam-sensor4 {
		cell-index = <4>;
		compatible = "qcom,cam-sensor";
		csiphy-sd-index = <3>;
		sensor-position-roll = <90>;
		sensor-position-pitch = <0>;
		sensor-position-yaw = <0>;
		eeprom-src = <&eeprom_front>;
		cam_vio-supply = <&L5N>;
		cam_vdig-supply = <&L2N>;
		cam_clk-supply = <&cam_cc_titan_top_gdsc>;
		cam_vana-supply = <&L6N>;
		cam_v_custom1-supply = <&L4N>;
		regulator-names = "cam_vio", "cam_vdig","cam_clk", "cam_vana",
			"cam_v_custom1";
		rgltr-cntrl-support;
		rgltr-min-voltage = <1800000 1056000 0 2800000 1800000>;
		rgltr-max-voltage = <1980000 1150000 0 2900000 1900000>;
		rgltr-load-current = <5560 454290 0 77860 29440>;
		gpio-no-mux = <0>;
		pinctrl-names = "cam_default", "cam_suspend";
		pinctrl-0 = <&cam_sensor_mclk3_active
					&cam_sensor_active_rst3>;
		pinctrl-1 = <&cam_sensor_mclk3_suspend
					&cam_sensor_suspend_rst3>;
		gpios = <&tlmm 68 0>,
			<&tlmm 126 0>;
		gpio-reset = <1>;
		gpio-req-tbl-num = <0 1>;
		gpio-req-tbl-flags = <1 0>;
		gpio-req-tbl-label = "CAMIF_MCLK3",
					"CAM_RESET3";
		cci-master = <CCI_MASTER_1>;
		clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK3_CLK>;
		clock-names = "cam_clk";
		clock-cntl-level = "nominal";
		clock-rates = <24000000>;
		status = "ok";
	};

	/* JN1 (Tele) */
	qcom,cam-sensor3 {
		cell-index = <3>;
		compatible = "qcom,cam-sensor";
		csiphy-sd-index = <2>;
		sensor-position-roll = <90>;
		sensor-position-pitch = <0>;
		sensor-position-yaw = <180>;
		eeprom-src = <&eeprom_tele>;
		actuator-src = <&actuator_triple_tele>;
		led-flash-src = <&led_flash_triple_rear_tele>;
		cam_vio-supply = <&L5N>;
		cam_vdig-supply = <&L2M>;
		cam_clk-supply = <&cam_cc_titan_top_gdsc>;
		cam_vana-supply = <&L4M>;
		cam_vaf-supply = <&L7M>;
		regulator-names = "cam_vio", "cam_vdig", "cam_clk",
			"cam_vana", "cam_vaf";
		rgltr-cntrl-support;
		rgltr-min-voltage = <1800000 1056000 0 2800000 2800000>;
		rgltr-max-voltage = <1980000 1150000 0 2900000 3000000>;
		rgltr-load-current = <4500 266330 0 69000 130040>;
		gpio-no-mux = <0>;
		pinctrl-names = "cam_default", "cam_suspend";
		pinctrl-0 = <&cam_sensor_mclk2_active
			&cam_sensor_active_rst2>;
		pinctrl-1 = <&cam_sensor_mclk2_suspend
			&cam_sensor_suspend_rst2>;
		gpios = <&tlmm 67 0>,
		  <&tlmm 125 0>;
		gpio-reset = <1>;
		gpio-req-tbl-num = <0 1>;
		gpio-req-tbl-flags = <1 0>;
		gpio-req-tbl-label = "CAMIF_MCLK2",
					"CAM_RESET2";
		cci-master = <CCI_MASTER_0>;
		clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK2_CLK>;
		clock-names = "cam_clk";
		clock-cntl-level = "nominal";
		clock-rates = <24000000>;
		status = "ok";
	};

};