// SPDX-License-Identifier: BSD-3-Clause
/*
 * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
 */

#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>

&spmi_bus {
	#address-cells = <2>;
	#size-cells = <0>;
	interrupt-controller;
	#interrupt-cells = <4>;

	qcom,pm7550ba@7 {
		compatible = "qcom,spmi-pmic";
		reg = <7 SPMI_USID>;
		#address-cells = <1>;
		#size-cells = <0>;

		pm7550ba_tz: qcom,temp-alarm@a00 {
			compatible = "qcom,spmi-temp-alarm";
			reg = <0xa00>;
			interrupts = <0x7 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
			#thermal-sensor-cells = <0>;
		};

		pm7550ba_sdam_1: sdam@7000 {
			compatible = "qcom,spmi-sdam";
			reg = <0x7000>;
		};

		pm7550ba_sdam_2: sdam@7100 {
			compatible = "qcom,spmi-sdam";
			reg = <0x7100>;
		};

		pm7550ba_sdam_3: sdam@7200 {
			compatible = "qcom,spmi-sdam";
			reg = <0x7200>;
		};

		pm7550ba_sdam_4: sdam@7300 {
			compatible = "qcom,spmi-sdam";
			reg = <0x7300>;
		};

		pm7550ba_gpios: pinctrl@8800 {
			compatible = "qcom,pm7550ba-gpio";
			reg = <0x8800>;
			gpio-controller;
			#gpio-cells = <2>;
			interrupt-controller;
			#interrupt-cells = <2>;
		};

		pm7550ba_eusb2_repeater: eusb2-repeater@fd00 {
			compatible = "qcom,pmic-eusb2-repeater";
			reg = <0xfd00>;
			status = "disabled";
		};

		pm7550ba_vib: qcom,vibrator@df00 {
			compatible = "qcom,qpnp-vibrator-ldo";
			reg = <0xdf00>;
			qcom,vib-ldo-volt-uv = <3000000>;
			qcom,disable-overdrive;
			status = "disabled";
		};

		pm7550ba_amoled: qcom,amoled {
			compatible = "qcom,amoled-regulator";
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";

			pm7550ba_oledb_vreg: oledb@fa00 {
				reg = <0xfa00>;
				reg-names = "oledb_base";
				regulator-name = "oledb";
				regulator-min-microvolt = <5000000>;
				regulator-max-microvolt = <8000000>;
				qcom,swire-control;
			};

			pm7550ba_ab_vreg: ab@f900 {
				reg = <0xf900>;
				reg-names = "ab_base";
				regulator-name = "ab";
				regulator-min-microvolt = <4600000>;
				regulator-max-microvolt = <5200000>;
				qcom,swire-control;
			};

			pm7550ba_ibb_vreg: ibb@f800 {
				reg = <0xf800>;
				reg-names = "ibb_base";
				regulator-name = "ibb";
				regulator-min-microvolt = <1400000>;
				regulator-max-microvolt = <6600000>;
				qcom,swire-control;
				regulator-allow-set-load;
			};
		};

		pm7550ba_amoled_ecm: qcom,amoled-ecm@f900 {
			compatible = "qcom,amoled-ecm";
			reg = <0xf900>;
			status = "disabled";

			nvmem-names = "amoled-ecm-sdam0", "amoled-ecm-sdam1",
				      "amoled-ecm-sdam2";
			nvmem = <&pmk8550_sdam_13>, <&pmk8550_sdam_14>,
				<&pmk8550_sdam_41>;
			interrupt-names = "ecm-sdam0", "ecm-sdam1",
					  "ecm-sdam2";
			interrupts = <0x0 0x7c 0x1 IRQ_TYPE_EDGE_RISING>,
				     <0x0 0x7d 0x1 IRQ_TYPE_EDGE_RISING>,
				     <0x0 0x98 0x1 IRQ_TYPE_EDGE_RISING>;
		};

		pm7550ba_bcl: bcl@4700 {
			compatible = "qcom,bcl-v5";
			reg = <0x4700 0x100>;
			interrupts = <0x7 0x47 0x0 IRQ_TYPE_NONE>,
					<0x7 0x47 0x1 IRQ_TYPE_NONE>,
					<0x7 0x47 0x2 IRQ_TYPE_NONE>;
			interrupt-names = "bcl-lvl0",
						"bcl-lvl1",
						"bcl-lvl2";
			qcom,pmic7-threshold;
			#thermal-sensor-cells = <1>;
		};

		bcl_soc:bcl-soc {
			compatible = "qcom,msm-bcl-soc";
			#thermal-sensor-cells = <0>;
		};
	};
};

&thermal_zones {
	pm7550ba_temp_alarm: pm7550ba_tz {
		polling-delay-passive = <100>;
		polling-delay = <0>;
		thermal-governor = "step_wise";
		thermal-sensors = <&pm7550ba_tz>;

		trips {
			pm7550ba_trip0: trip0 {
				temperature = <95000>;
				hysteresis = <0>;
				type = "passive";
			};

			pm7550ba_trip1: trip1 {
				temperature = <115000>;
				hysteresis = <0>;
				type = "hot";
			};

			pm7550ba_trip2: trip2 {
				temperature = <145000>;
				hysteresis = <0>;
				type = "critical";
			};
		};
	};

	pm7550ba-ibat-lvl0 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&pm7550ba_bcl 0>;

		trips {
			ibat_lvl0:ibat-lvl0 {
				temperature = <7000>;
				hysteresis = <200>;
				type = "passive";
			};
		};
	};

	pm7550ba-ibat-lvl1 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&pm7550ba_bcl 1>;

		trips {
			ibat_lvl1:ibat-lvl1 {
				temperature = <9000>;
				hysteresis = <200>;
				type = "passive";
			};
		};
	};

	vbat {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&pm7550ba_bcl 2>;

		trips {
			vbat_lvl0:vbat-lvl0 {
				temperature = <2800>;
				hysteresis = <100>;
				type = "passive";
			};

			vbat_lvl1:vbat-lvl1 {
				temperature = <2600>;
				hysteresis = <100>;
				type = "passive";
			};

			vbat_lvl2:vbat-lvl2 {
				temperature = <2300>;
				hysteresis = <100>;
				type = "passive";
			};
		};
	};

	pm7550ba-bcl-lvl0 {
		polling-delay-passive = <50>;
		polling-delay = <0>;
		thermal-sensors = <&pm7550ba_bcl 5>;

		trips {
			thermal-engine-trip {
				temperature = <100>;
				hysteresis = <0>;
				type = "passive";
			};

			thermal-hal-trip {
				temperature = <100>;
				hysteresis = <0>;
				type = "passive";
			};

			b_bcl_lvl0: b-bcl-lvl0 {
				temperature = <1>;
				hysteresis = <1>;
				type = "passive";
			};
		};
	};

	pm7550ba-bcl-lvl1 {
		polling-delay-passive = <50>;
		polling-delay = <0>;
		thermal-sensors = <&pm7550ba_bcl 6>;

		trips {
			thermal-engine-trip {
				temperature = <100>;
				hysteresis = <0>;
				type = "passive";
			};

			thermal-hal-trip {
				temperature = <100>;
				hysteresis = <0>;
				type = "passive";
			};

			b_bcl_lvl1: b-bcl-lvl1 {
				temperature = <1>;
				hysteresis = <1>;
				type = "passive";
			};
		};
	};

	pm7550ba-bcl-lvl2 {
		polling-delay-passive = <50>;
		polling-delay = <0>;
		thermal-sensors = <&pm7550ba_bcl 7>;

		trips {
			thermal-engine-trip {
				temperature = <100>;
				hysteresis = <0>;
				type = "passive";
			};

			thermal-hal-trip {
				temperature = <100>;
				hysteresis = <0>;
				type = "passive";
			};

			b_bcl_lvl2: b-bcl-lvl2 {
				temperature = <1>;
				hysteresis = <1>;
				type = "passive";
			};
		};
	};

	socd {
		polling-delay-passive = <100>;
		polling-delay = <0>;
		thermal-sensors = <&bcl_soc>;

		trips {
			thermal-engine-trip {
				temperature = <100>;
				hysteresis = <0>;
				type = "passive";
			};

			thermal-hal-trip {
				temperature = <100>;
				hysteresis = <0>;
				type = "passive";
			};

			socd_trip:socd-trip {
				temperature = <90>;
				hysteresis = <0>;
				type = "passive";
			};
		};
	};
};