# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/remoteproc/qcom,spss.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: SPSS Peripheral Image Loader

maintainers:
  - Nurit Lichtenstein <quic_nuritl@quicinc.com>

description:
  This document defines the binding for a component that loads
  and boots firmware on the QTI Secure Processor.

properties:
  compatible:
    enum:
      - qcom,waipio-spss-pas
      - qcom,kalama-spss-pas
      - qcom,pineapple-spss-pas
      - qcom,sun-spss-pas

  reg:
    minItems: 1
    items:
      - description: SP to SoC IRQ status register
      - description: SP to SoC IRQ clear register
      - description: SP to SoC IRQ mask register
      - description: RMB error register
      - description: RMB general purpose register
      - description: RMB error spare2 register

  reg-names:
    items:
      - const: sp2soc_irq_status
      - const: sp2soc_irq_clr
      - const: sp2soc_irq_mask
      - const: rmb_err
      - const: rmb_general_purpose
      - const: rmb_err_spare2

  interrupts:
    items:
      - description: Generic interrupt

  clocks:
    items:
      - description: reference to the xo clock and optionally aggre2 clock

  clock-names:
    items:
      - const: xo

  cx-supply:
    description: Phandle to the CX regulator

  px-supply:
    description: Phandle to the PX regulator

  sensors-supply:
    description: Phandle to the Sensors regulator

  sensors-uV-uA:
    description: Voltage and Current levels for Sensors regulator

  memory-region:
    maxItems: 1
    description: Reference to the reserved-memory for the SPSS

  glink-edge:
    $ref: /schemas/remoteproc/qcom,glink-edge.yaml#
    description:
      QTI G-Link subnode which represents communication edge, channels
      and devices related to the SPSS.

required:
  - compatible
  - reg
  - reg-names
  - interrupts
  - cx-supply
  - sensors-supply
  - sensors-uV-uA
  - clocks
  - clock-names
  - memory-region

additionalProperties: false

examples:
  # The following example represents the qcom,spss node on a sun device.
  - |
    spss_pas: remoteproc-spss@1880000 {
        compatible = "qcom,sun-spss-pas";
        ranges;
        reg = <0x188101c 0x4>,
              <0x1881024 0x4>,
              <0x1881028 0x4>,
              <0x188103c 0x4>,
              <0x1881100 0x4>,
              <0x1882014 0x4>;
        reg-names = "sp2soc_irq_status", "sp2soc_irq_clr", "sp2soc_irq_mask",
                    "rmb_err", "rmb_general_purpose", "rmb_err_spare2";
        interrupts = <0 352 1>;

        cx-supply = <&VDD_CX_LEVEL>;
        cx-uV-uA = <RPMH_REGULATOR_LEVEL_TURBO 100000>;

        sensors-supply = <&L2J>;
        sensors-uV-uA = <1200000 100000>;

        clocks = <&rpmhcc RPMH_CXO_CLK>;
        clock-names = "xo";
        qcom,proxy-clock-names = "xo";
        status = "ok";

        memory-region = <&spss_region_mem>;
        qcom,spss-scsr-bits = <24 25>;
        qcom,extra-size = <4096>;

        interconnects = <&aggre2_noc MASTER_CRYPTO &mc_virt SLAVE_EBI1>;
        interconnect-names = "crypto_ddr";

        glink-edge {
        qcom,remote-pid = <8>;
            mboxes = <&ipcc_mproc IPCC_CLIENT_SPSS
                IPCC_MPROC_SIGNAL_GLINK_QMP>;
            mbox-names = "spss_spss";
            interrupt-parent = <&ipcc_mproc>;
            interrupts = <IPCC_CLIENT_SPSS
                          IPCC_MPROC_SIGNAL_GLINK_QMP
                          IRQ_TYPE_EDGE_RISING>;

            reg = <0x1885008 0x8>,
                  <0x1885010 0x4>;
            reg-names = "qcom,spss-addr",
                        "qcom,spss-size";

            label = "spss";
            qcom,glink-label = "spss";
        };
    };