// SPDX-License-Identifier: BSD-3-Clause
/*
 * Copyright (c) 2023-2025 Qualcomm Innovation Center, Inc. All rights reserved.
 */

#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>

&spmi_bus {
	#address-cells = <2>;
	#size-cells = <0>;
	interrupt-controller;
	#interrupt-cells = <4>;

	qcom,pmd802x@4 {
		compatible = "qcom,spmi-pmic";
		reg = <0x4 SPMI_USID>;
		#address-cells = <1>;
		#size-cells = <0>;

		pmic-ecid@100 {
			compatible = "qcom,pmic-ecid";
			reg = <0x100>;
			qcom,pmic-name = "pmd802x";
		};

		pmd802x_tz: pmd802x-temp-alarm@a00 {
			compatible = "qcom,spmi-temp-alarm";
			reg = <0xa00>;
			interrupts = <0x4 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
			#thermal-sensor-cells = <0>;
		};

		pmd802x_gpios: pinctrl@8800 {
			compatible = "qcom,pmd802x-gpio";
			reg = <0x8800>;
			gpio-controller;
			#gpio-cells = <2>;
			interrupt-controller;
			#interrupt-cells = <2>;
		};

		amoled-ecm@f900 {
			compatible = "qcom,amoled-ecm";
			reg = <0xf900>;
			nvmem-names = "amoled-ecm-sdam0", "amoled-ecm-sdam1",
				      "amoled-ecm-sdam2";
			nvmem = <&pmk8550_sdam_13>, <&pmk8550_sdam_14>,
				<&pmk8550_sdam_41>;
			interrupt-names = "ecm-sdam0", "ecm-sdam1",
					  "ecm-sdam2";
			interrupts = <0x0 0x7c 0x1 IRQ_TYPE_EDGE_RISING>,
				     <0x0 0x7d 0x1 IRQ_TYPE_EDGE_RISING>,
				     <0x0 0x98 0x1 IRQ_TYPE_EDGE_RISING>;
		};

		qcom-amoled {
			compatible = "qcom,amoled-regulator";
			#address-cells = <1>;
			#size-cells = <0>;
			/*
			 * Following ibb_spur_sqm_timer nvmem cell is specified
			 * only to show its use. But it won't be used by
			 * amoled-regulator until qcom,ibb-spur-mitigation-level
			 * and other related properties are specified under
			 * ibb subnode.
			 */
			nvmem-cells = <&ibb_spur_sqm_timer>;
			nvmem-cell-names = "ibb_spur_sqm_timer";
			status = "disabled";

			ibb_vreg: ibb@f800 {
				reg = <0xf800>;
				reg-names = "ibb_base";
				regulator-name = "ibb";
				regulator-min-microvolt = <800000>;
				regulator-max-microvolt = <9000000>;
				regulator-allow-set-load;
				qcom,swire-control;
			};

			ab_vreg: elvdd@f900 {
				reg = <0xf900>;
				reg-names = "ab_base";
				regulator-name = "ab";
				regulator-min-microvolt = <2500000>;
				regulator-max-microvolt = <5500000>;
				qcom,swire-control;
			};

			oledb_vreg: oledb@fa00 {
				reg = <0xfa00>;
				reg-names = "oledb_base";
				regulator-name = "oledb";
				regulator-min-microvolt = <5000000>;
				regulator-max-microvolt = <8000000>;
				qcom,swire-control;
			};
		};
	};
};

&thermal_zones {
	pmd802x_temp_alarm: pmd802x_tz {
		polling-delay-passive = <100>;
		polling-delay = <0>;
		thermal-governor = "step_wise";
		thermal-sensors = <&pmd802x_tz>;

		trips {
			pmd802x_trip0: trip0 {
				temperature = <95000>;
				hysteresis = <0>;
				type = "passive";
			};

			pmd802x_trip1: trip1 {
				temperature = <115000>;
				hysteresis = <0>;
				type = "hot";
			};

			pmd802x_trip2: trip2 {
				temperature = <145000>;
				hysteresis = <0>;
				type = "critical";
			};
		};
	};
};