// SPDX-License-Identifier: BSD-3-Clause
/*
 * Copyright (c) 2023-2024 Qualcomm Innovation Center, Inc. All rights reserved.
 */

#include <dt-bindings/thermal/thermal_qti.h>

&msm_gpu {
	#cooling-cells = <2>;
};

&soc {
	tsens0: tsens0@c228000 {
		compatible = "qcom,tsens-v2";
		reg = <0x0c228000 0x1ff>, /* TM */
		      <0x0c222000 0x1ff>; /* SROT */
		#qcom,sensors = <15>;
		interrupts = <GIC_SPI 771 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 484 IRQ_TYPE_LEVEL_HIGH>;
		interrupt-names = "uplow","critical";
		#thermal-sensor-cells = <1>;
	};

	tsens1: tsens1@c229000 {
		compatible = "qcom,tsens-v2";
		reg = <0x0c229000 0x1ff>, /* TM */
		      <0x0c223000 0x1ff>; /* SROT */
		#qcom,sensors = <15>;
		interrupts = <GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 485 IRQ_TYPE_LEVEL_HIGH>;
		interrupt-names = "uplow","critical";
		#thermal-sensor-cells = <1>;
	};

	tsens2: tsens2@c22a000 {
		compatible = "qcom,tsens-v2";
		reg = <0x0c22a000 0x1ff>, /* TM */
		      <0x0c224000 0x1ff>; /* SROT */
		#qcom,sensors = <16>;
		interrupts = <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>;
		interrupt-names = "uplow","critical";
		#thermal-sensor-cells = <1>;
	};

	tsens3: tsens3@c22b000 {
		compatible = "qcom,tsens-v2";
		reg = <0x0c22b000 0x1ff>, /* TM */
		      <0x0c225000 0x1ff>; /* SROT */
		#qcom,sensors = <1>;
		interrupts = <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>;
		interrupt-names = "uplow","critical";
		#thermal-sensor-cells = <1>;
	};

	qcom,cpu-pause {
		compatible = "qcom,thermal-pause";

		cpu0_pause: cpu0-pause {
			qcom,cpus = <&CPU0>;
			#cooling-cells = <2>;
		};

		cpu1_pause: cpu1-pause {
			qcom,cpus = <&CPU1>;
			#cooling-cells = <2>;
		};

		cpu2_pause: cpu2-pause {
			qcom,cpus = <&CPU2>;
			#cooling-cells = <2>;
		};

		cpu3_pause: cpu3-pause {
			qcom,cpus = <&CPU3>;
			#cooling-cells = <2>;
		};

		cpu4_pause: cpu4-pause {
			qcom,cpus = <&CPU4>;
			#cooling-cells = <2>;
		};

		cpu5_pause: cpu5-pause {
			qcom,cpus = <&CPU5>;
			#cooling-cells = <2>;
		};

		cpu6_pause: cpu6-pause {
			qcom,cpus = <&CPU6>;
			#cooling-cells = <2>;
		};

		cpu7_pause: cpu7-pause {
			qcom,cpus = <&CPU7>;
			#cooling-cells = <2>;
		};

		//TODO: what about core 0, we can't pause all?
		APC0_MX_CX_PAUSE: apc0-mx-cx-pause {
			qcom,cpus = <&CPU1 &CPU2 &CPU3 &CPU4 &CPU5>;
			#cooling-cells = <2>;
		};

		APC1_MX_CX_PAUSE: apc1-mx-cx-pause {
			qcom,cpus = <&CPU6 &CPU7>;
			#cooling-cells = <2>;
		};

		cpu_1_2_3_4_5_pause: cpu-1-2-3-4-5-pause {
			qcom,cpus = <&CPU1 &CPU2 &CPU3 &CPU4 &CPU5>;
			#cooling-cells = <2>;
		};

		cpu_6_7_pause: cpu-6-7-pause {
			qcom,cpus = <&CPU6 &CPU7>;
			#cooling-cells = <2>;
		};

		/* Thermal-engine cooling devices */
		pause-cpu0 {
			qcom,cpus = <&CPU0>;
			qcom,cdev-alias = "pause-cpu0";
		};

		pause-cpu1 {
			qcom,cpus = <&CPU1>;
			qcom,cdev-alias = "pause-cpu1";
		};

		pause-cpu2 {
			qcom,cpus = <&CPU2>;
			qcom,cdev-alias = "pause-cpu2";
		};

		pause-cpu3 {
			qcom,cpus = <&CPU3>;
			qcom,cdev-alias = "pause-cpu3";
		};

		pause-cpu4 {
			qcom,cpus = <&CPU4>;
			qcom,cdev-alias = "pause-cpu4";
		};

		pause-cpu5 {
			qcom,cpus = <&CPU5>;
			qcom,cdev-alias = "pause-cpu5";
		};

		pause-cpu6 {
			qcom,cpus = <&CPU6>;
			qcom,cdev-alias = "pause-cpu6";
		};

		pause-cpu7 {
			qcom,cpus = <&CPU7>;
			qcom,cdev-alias = "pause-cpu7";
		};
	};

	qcom,cpu-hotplug {
		compatible = "qcom,cpu-hotplug";

		cpu0_hotplug: cpu0-hotplug {
			qcom,cpu = <&CPU0>;
			#cooling-cells = <2>;
		};

		cpu1_hotplug: cpu1-hotplug {
			qcom,cpu = <&CPU1>;
			#cooling-cells = <2>;
		};

		cpu2_hotplug: cpu2-hotplug {
			qcom,cpu = <&CPU2>;
			#cooling-cells = <2>;
		};

		cpu3_hotplug: cpu3-hotplug {
			qcom,cpu = <&CPU3>;
			#cooling-cells = <2>;
		};

		cpu4_hotplug: cpu4-hotplug {
			qcom,cpu = <&CPU4>;
			#cooling-cells = <2>;
		};

		cpu5_hotplug: cpu5-hotplug {
			qcom,cpu = <&CPU5>;
			#cooling-cells = <2>;
		};

		cpu6_hotplug: cpu6-hotplug {
			qcom,cpu = <&CPU6>;
			#cooling-cells = <2>;
		};

		cpu7_hotplug: cpu7-hotplug {
			qcom,cpu = <&CPU7>;
			#cooling-cells = <2>;
		};
	};

	qcom,devfreq-cdev {
		compatible = "qcom,devfreq-cdev";
		qcom,devfreq = <&msm_gpu>;
	};

	qcom,cpufreq-cdev {
		compatible = "qcom,cpufreq-cdev";
		cpu-cluster0 {
			qcom,cpus = <&CPU0 &CPU1 &CPU2 &CPU3 &CPU4 &CPU5>;
		};

		cpu-cluster1 {
			qcom,cpus = <&CPU6 &CPU7>;
		};
	};
};

#include "sun-thermal-modem.dtsi"

&thermal_zones {
	aoss-0 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&tsens0 0>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	cpu-0-0-0 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens0 1>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			cpu0_emerg0: cpu0-emerg0-cfg {
				temperature = <108000>;
				hysteresis = <8000>;
				type = "passive";
			};

			cpu0_emerg0_1: cpu0-emerg0-1-cfg {
				temperature = <110000>;
				hysteresis = <10000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};

		cooling-maps {
			cpu000_cdev {
				trip = <&cpu0_emerg0>;
				cooling-device = <&cpu0_pause 1 1>;
			};

			cpu000_cdev1 {
				trip = <&cpu0_emerg0_1>;
				cooling-device = <&cpu0_hotplug 1 1>;
			};
		};
	};

	cpu-0-0-1 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens0 2>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			cpu0_emerg1: cpu0-emerg1-cfg {
				temperature = <108000>;
				hysteresis = <8000>;
				type = "passive";
			};

			cpu0_emerg1_1: cpu0-emerg1-1-cfg {
				temperature = <110000>;
				hysteresis = <10000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};

		cooling-maps {
			cpu001_cdev {
				trip = <&cpu0_emerg1>;
				cooling-device = <&cpu0_pause 1 1>;
			};

			cpu001_cdev1 {
				trip = <&cpu0_emerg1_1>;
				cooling-device = <&cpu0_hotplug 1 1>;
			};
		};
	};

	cpu-0-1-0 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens0 3>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			cpu1_emerg0: cpu1-emerg0-cfg {
				temperature = <108000>;
				hysteresis = <8000>;
				type = "passive";
			};

			cpu1_emerg0_1: cpu1-emerg0-1-cfg {
				temperature = <110000>;
				hysteresis = <10000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};

		cooling-maps {
			cpu010_cdev {
				trip = <&cpu1_emerg0>;
				cooling-device = <&cpu1_pause 1 1>;
			};

			cpu010_cdev1 {
				trip = <&cpu1_emerg0_1>;
				cooling-device = <&cpu1_hotplug 1 1>;
			};
		};
	};

	cpu-0-1-1 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens0 4>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			cpu1_emerg1: cpu1-emerg1-cfg {
				temperature = <108000>;
				hysteresis = <8000>;
				type = "passive";
			};

			cpu1_emerg1_1: cpu1-emerg1-1-cfg {
				temperature = <110000>;
				hysteresis = <10000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};

		cooling-maps {
			cpu011_cdev {
				trip = <&cpu1_emerg1>;
				cooling-device = <&cpu1_pause 1 1>;
			};

			cpu011_cdev1 {
				trip = <&cpu1_emerg1_1>;
				cooling-device = <&cpu1_hotplug 1 1>;
			};
		};
	};

	cpu-0-2-0 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens0 5>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			cpu2_emerg0: cpu2-emerg0-cfg {
				temperature = <108000>;
				hysteresis = <8000>;
				type = "passive";
			};

			cpu2_emerg0_1: cpu2-emerg0-1-cfg {
				temperature = <110000>;
				hysteresis = <10000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};

		cooling-maps {
			cpu020_cdev {
				trip = <&cpu2_emerg0>;
				cooling-device = <&cpu2_pause 1 1>;
			};

			cpu020_cdev1 {
				trip = <&cpu2_emerg0_1>;
				cooling-device = <&cpu2_hotplug 1 1>;
			};
		};
	};

	cpu-0-2-1 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens0 6>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			cpu2_emerg1: cpu2-emerg1-cfg {
				temperature = <108000>;
				hysteresis = <8000>;
				type = "passive";
			};

			cpu2_emerg1_1: cpu2-emerg1-1-cfg {
				temperature = <110000>;
				hysteresis = <10000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};

		cooling-maps {
			cpu021_cdev {
				trip = <&cpu2_emerg1>;
				cooling-device = <&cpu2_pause 1 1>;
			};

			cpu021_cdev1 {
				trip = <&cpu2_emerg1_1>;
				cooling-device = <&cpu2_hotplug 1 1>;
			};
		};
	};

	cpu-0-3-0 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens0 7>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			cpu3_emerg0: cpu3-emerg0-cfg {
				temperature = <108000>;
				hysteresis = <8000>;
				type = "passive";
			};

			cpu3_emerg0_1: cpu3-emerg0-1-cfg {
				temperature = <110000>;
				hysteresis = <10000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};

		cooling-maps {
			cpu030_cdev {
				trip = <&cpu3_emerg0>;
				cooling-device = <&cpu3_pause 1 1>;
			};

			cpu030_cdev1 {
				trip = <&cpu3_emerg0_1>;
				cooling-device = <&cpu3_hotplug 1 1>;
			};
		};
	};

	cpu-0-3-1 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens0 8>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			cpu3_emerg1: cpu3-emerg1-cfg {
				temperature = <108000>;
				hysteresis = <8000>;
				type = "passive";
			};

			cpu3_emerg1_1: cpu3-emerg1-1-cfg {
				temperature = <110000>;
				hysteresis = <10000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};

		cooling-maps {
			cpu031_cdev {
				trip = <&cpu3_emerg1>;
				cooling-device = <&cpu3_pause 1 1>;
			};

			cpu031_cdev1 {
				trip = <&cpu3_emerg1_1>;
				cooling-device = <&cpu3_hotplug 1 1>;
			};
		};
	};

	cpu-0-4-0 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens0 9>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			cpu4_emerg0: cpu4-emerg0-cfg {
				temperature = <108000>;
				hysteresis = <8000>;
				type = "passive";
			};

			cpu4_emerg0_1: cpu4-emerg0-1-cfg {
				temperature = <110000>;
				hysteresis = <10000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};

		cooling-maps {
			cpu040_cdev {
				trip = <&cpu4_emerg0>;
				cooling-device = <&cpu4_pause 1 1>;
			};

			cpu040_cdev1 {
				trip = <&cpu4_emerg0_1>;
				cooling-device = <&cpu4_hotplug 1 1>;
			};
		};
	};

	cpu-0-4-1 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens0 10>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			cpu4_emerg1: cpu4-emerg1-cfg {
				temperature = <108000>;
				hysteresis = <8000>;
				type = "passive";
			};

			cpu4_emerg1_1: cpu4-emerg1-1-cfg {
				temperature = <110000>;
				hysteresis = <10000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};

		cooling-maps {
			cpu041_cdev {
				trip = <&cpu4_emerg1>;
				cooling-device = <&cpu4_pause 1 1>;
			};

			cpu041_cdev1 {
				trip = <&cpu4_emerg1_1>;
				cooling-device = <&cpu4_hotplug 1 1>;
			};
		};
	};

	cpu-0-5-0 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens0 11>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			cpu5_emerg0: cpu5-emerg0-cfg {
				temperature = <108000>;
				hysteresis = <8000>;
				type = "passive";
			};

			cpu5_emerg0_1: cpu5-emerg0-1-cfg {
				temperature = <110000>;
				hysteresis = <10000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};

		cooling-maps {
			cpu050_cdev {
				trip = <&cpu5_emerg0>;
				cooling-device = <&cpu5_pause 1 1>;
			};

			cpu050_cdev1 {
				trip = <&cpu5_emerg0_1>;
				cooling-device = <&cpu5_hotplug 1 1>;
			};
		};
	};

	cpu-0-5-1 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens0 12>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			cpu5_emerg1: cpu5-emerg1-cfg {
				temperature = <108000>;
				hysteresis = <8000>;
				type = "passive";
			};

			cpu5_emerg1_1: cpu5-emerg1-1-cfg {
				temperature = <110000>;
				hysteresis = <10000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};

		cooling-maps {
			cpu051_cdev {
				trip = <&cpu5_emerg1>;
				cooling-device = <&cpu5_pause 1 1>;
			};

			cpu051_cdev1 {
				trip = <&cpu5_emerg1_1>;
				cooling-device = <&cpu5_hotplug 1 1>;
			};
		};
	};

	cpuss-0-0 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&tsens0 13>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	cpuss-0-1 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&tsens0 14>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	aoss-1 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&tsens1 0>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	cpu-1-0-0 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens1 1>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			cpu6_emerg0: cpu6-emerg0-cfg {
				temperature = <108000>;
				hysteresis = <8000>;
				type = "passive";
			};

			cpu6_emerg0_1: cpu6-emerg0-1-cfg {
				temperature = <110000>;
				hysteresis = <10000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};

		cooling-maps {
			cpu100_cdev {
				trip = <&cpu6_emerg0>;
				cooling-device = <&cpu6_pause 1 1>;
			};

			cpu100_cdev1 {
				trip = <&cpu6_emerg0_1>;
				cooling-device = <&cpu6_hotplug 1 1>;
			};
		};
	};

	cpu-1-0-1 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens1 2>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			cpu6_emerg1: cpu6-emerg1-cfg {
				temperature = <108000>;
				hysteresis = <8000>;
				type = "passive";
			};

			cpu6_emerg1_1: cpu6-emerg1-1-cfg {
				temperature = <110000>;
				hysteresis = <10000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};

		cooling-maps {
			cpu101_cdev {
				trip = <&cpu6_emerg1>;
				cooling-device = <&cpu6_pause 1 1>;
			};

			cpu101_cdev1 {
				trip = <&cpu6_emerg1_1>;
				cooling-device = <&cpu6_hotplug 1 1>;
			};
		};
	};

	cpu-1-1-0 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens1 3>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			cpu7_emerg0: cpu7-emerg0-cfg {
				temperature = <108000>;
				hysteresis = <8000>;
				type = "passive";
			};

			cpu7_emerg0_1: cpu7-emerg0-1-cfg {
				temperature = <110000>;
				hysteresis = <10000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};

		cooling-maps {
			cpu110_cdev {
				trip = <&cpu7_emerg0>;
				cooling-device = <&cpu7_pause 1 1>;
			};

			cpu110_cdev1 {
				trip = <&cpu7_emerg0_1>;
				cooling-device = <&cpu7_hotplug 1 1>;
			};
		};
	};

	cpu-1-1-1 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens1 4>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			cpu7_emerg1: cpu7-emerg1-cfg {
				temperature = <108000>;
				hysteresis = <8000>;
				type = "passive";
			};

			cpu7_emerg1_1: cpu7-emerg1-1-cfg {
				temperature = <110000>;
				hysteresis = <10000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};

		cooling-maps {
			cpu111_cdev {
				trip = <&cpu7_emerg1>;
				cooling-device = <&cpu7_pause 1 1>;
			};

			cpu111_cdev1 {
				trip = <&cpu7_emerg1_1>;
				cooling-device = <&cpu7_hotplug 1 1>;
			};
		};
	};

	cpuss-1-0 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&tsens1 5>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	cpuss-1-1 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&tsens1 6>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	nsphvx-0 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens1 7>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	nsphvx-1 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens1 8>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	nsphvx-2 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens1 9>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	nsphmx-0 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens1 10>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	nsphmx-1 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens1 11>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	nsphmx-2 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens1 12>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	nsphmx-3 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens1 13>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	ddr {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens1 14>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			ddr_config0: ddr0-config {
				temperature = <90000>;
				hysteresis = <5000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	aoss-2 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&tsens2 0>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	gpuss-0 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens2 1>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			gpu0_tj_cfg: tj_cfg {
				temperature = <95000>;
				hysteresis = <5000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};

		cooling-maps {
			gpu0_cdev {
				trip = <&gpu0_tj_cfg>;
				cooling-device = <&msm_gpu 0 THERMAL_NO_LIMIT>;
			};
		};
	};

	gpuss-1 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens2 2>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			gpu1_tj_cfg: tj_cfg {
				temperature = <95000>;
				hysteresis = <5000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};

		cooling-maps {
			gpu1_cdev {
				trip = <&gpu1_tj_cfg>;
				cooling-device = <&msm_gpu 0 THERMAL_NO_LIMIT>;
			};
		};
	};

	gpuss-2 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens2 3>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			gpu2_tj_cfg: tj_cfg {
				temperature = <95000>;
				hysteresis = <5000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};

		cooling-maps {
			gpu2_cdev {
				trip = <&gpu2_tj_cfg>;
				cooling-device = <&msm_gpu 0 THERMAL_NO_LIMIT>;
			};
		};
	};

	gpuss-3 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens2 4>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			gpu3_tj_cfg: tj_cfg {
				temperature = <95000>;
				hysteresis = <5000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};

		cooling-maps {
			gpu3_cdev {
				trip = <&gpu3_tj_cfg>;
				cooling-device = <&msm_gpu 0 THERMAL_NO_LIMIT>;
			};
		};
	};

	gpuss-4 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens2 5>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			gpu4_tj_cfg: tj_cfg {
				temperature = <95000>;
				hysteresis = <5000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};

		cooling-maps {
			gpu4_cdev {
				trip = <&gpu4_tj_cfg>;
				cooling-device = <&msm_gpu 0 THERMAL_NO_LIMIT>;
			};
		};
	};

	gpuss-5 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens2 6>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			gpu5_tj_cfg: tj_cfg {
				temperature = <95000>;
				hysteresis = <5000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};

		cooling-maps {
			gpu5_cdev {
				trip = <&gpu5_tj_cfg>;
				cooling-device = <&msm_gpu 0 THERMAL_NO_LIMIT>;
			};
		};
	};

	gpuss-6 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens2 7>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			gpu6_tj_cfg: tj_cfg {
				temperature = <95000>;
				hysteresis = <5000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};

		cooling-maps {
			gpu6_cdev {
				trip = <&gpu6_tj_cfg>;
				cooling-device = <&msm_gpu 0 THERMAL_NO_LIMIT>;
			};
		};
	};

	gpuss-7 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens2 8>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			gpu7_tj_cfg: tj_cfg {
				temperature = <95000>;
				hysteresis = <5000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};

		cooling-maps {
			gpu7_cdev {
				trip = <&gpu7_tj_cfg>;
				cooling-device = <&msm_gpu 0 THERMAL_NO_LIMIT>;
			};
		};
	};

	mdmss-0 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&tsens2 9>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			mdmss0_config0: mdmss0-config0 {
				temperature = <102000>;
				hysteresis = <3000>;
				type = "passive";
			};

			mdmss0_config1: mdmss0-config1 {
				temperature = <105000>;
				hysteresis = <3000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	mdmss-1 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&tsens2 10>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			mdmss1_config0: mdmss1-config0 {
				temperature = <102000>;
				hysteresis = <3000>;
				type = "passive";
			};

			mdmss1_config1: mdmss1-config1 {
				temperature = <105000>;
				hysteresis = <3000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	mdmss-2 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&tsens2 11>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			mdmss2_config0: mdmss2-config0 {
				temperature = <102000>;
				hysteresis = <3000>;
				type = "passive";
			};

			mdmss2_config1: mdmss2-config1 {
				temperature = <105000>;
				hysteresis = <3000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	mdmss-3 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&tsens2 12>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			mdmss3_config0: mdmss3-config0 {
				temperature = <102000>;
				hysteresis = <3000>;
				type = "passive";
			};

			mdmss3_config1: mdmss3-config1 {
				temperature = <105000>;
				hysteresis = <3000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	camera-0 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&tsens2 13>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	camera-1 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&tsens2 14>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	video {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&tsens2 15>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	aoss-3 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&tsens3 0>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};
};