// SPDX-License-Identifier: BSD-3-Clause
/*
 * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
 */

#include <dt-bindings/thermal/thermal_qti.h>

&soc {
	tsens0: tsens0@c228000 {
		compatible = "qcom,tsens-v2";
		reg = <0x0c228000 0x1ff>, /* TM */
		      <0x0c222000 0x1ff>; /* SROT */
		#qcom,sensors = <15>;
		interrupts = <GIC_SPI 771 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 484 IRQ_TYPE_LEVEL_HIGH>;
		interrupt-names = "uplow","critical";
		#thermal-sensor-cells = <1>;
	};

	tsens1: tsens1@c229000 {
		compatible = "qcom,tsens-v2";
		reg = <0x0c229000 0x1ff>, /* TM */
		      <0x0c223000 0x1ff>; /* SROT */
		#qcom,sensors = <15>;
		interrupts = <GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 485 IRQ_TYPE_LEVEL_HIGH>;
		interrupt-names = "uplow","critical";
		#thermal-sensor-cells = <1>;
	};

	tsens2: tsens2@c22a000 {
		compatible = "qcom,tsens-v2";
		reg = <0x0c22a000 0x1ff>, /* TM */
		      <0x0c224000 0x1ff>; /* SROT */
		#qcom,sensors = <16>;
		interrupts = <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>;
		interrupt-names = "uplow","critical";
		#thermal-sensor-cells = <1>;
	};

	tsens3: tsens3@c22b000 {
		compatible = "qcom,tsens-v2";
		reg = <0x0c22b000 0x1ff>, /* TM */
		      <0x0c225000 0x1ff>; /* SROT */
		#qcom,sensors = <1>;
		interrupts = <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>;
		interrupt-names = "uplow","critical";
		#thermal-sensor-cells = <1>;
	};
};

&thermal_zones {
	aoss-0 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&tsens0 0>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	cpu-0-0-0 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens0 1>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			cpu0_emerg0: cpu0-emerg0-cfg {
				temperature = <108000>;
				hysteresis = <8000>;
				type = "passive";
			};

			cpu0_emerg0_1: cpu0-emerg0-1-cfg {
				temperature = <110000>;
				hysteresis = <10000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	cpu-0-0-1 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens0 2>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			cpu0_emerg1: cpu0-emerg1-cfg {
				temperature = <108000>;
				hysteresis = <8000>;
				type = "passive";
			};

			cpu0_emerg1_1: cpu0-emerg1-1-cfg {
				temperature = <110000>;
				hysteresis = <10000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	cpu-0-1-0 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens0 3>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			cpu1_emerg0: cpu1-emerg0-cfg {
				temperature = <108000>;
				hysteresis = <8000>;
				type = "passive";
			};

			cpu1_emerg0_1: cpu1-emerg0-1-cfg {
				temperature = <110000>;
				hysteresis = <10000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	cpu-0-1-1 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens0 4>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			cpu1_emerg1: cpu1-emerg1-cfg {
				temperature = <108000>;
				hysteresis = <8000>;
				type = "passive";
			};

			cpu1_emerg1_1: cpu1-emerg1-1-cfg {
				temperature = <110000>;
				hysteresis = <10000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	cpu-0-2-0 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens0 5>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			cpu2_emerg0: cpu2-emerg0-cfg {
				temperature = <108000>;
				hysteresis = <8000>;
				type = "passive";
			};

			cpu2_emerg0_1: cpu2-emerg0-1-cfg {
				temperature = <110000>;
				hysteresis = <10000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	cpu-0-2-1 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens0 6>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			cpu2_emerg1: cpu2-emerg1-cfg {
				temperature = <108000>;
				hysteresis = <8000>;
				type = "passive";
			};

			cpu2_emerg1_1: cpu2-emerg1-1-cfg {
				temperature = <110000>;
				hysteresis = <10000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	cpu-0-3-0 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens0 7>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			cpu3_emerg0: cpu3-emerg0-cfg {
				temperature = <108000>;
				hysteresis = <8000>;
				type = "passive";
			};

			cpu3_emerg0_1: cpu3-emerg0-1-cfg {
				temperature = <110000>;
				hysteresis = <10000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	cpu-0-3-1 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens0 8>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			cpu3_emerg1: cpu3-emerg1-cfg {
				temperature = <108000>;
				hysteresis = <8000>;
				type = "passive";
			};

			cpu3_emerg1_1: cpu3-emerg1-1-cfg {
				temperature = <110000>;
				hysteresis = <10000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	cpu-0-4-0 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens0 9>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			cpu4_emerg0: cpu4-emerg0-cfg {
				temperature = <108000>;
				hysteresis = <8000>;
				type = "passive";
			};

			cpu4_emerg0_1: cpu4-emerg0-1-cfg {
				temperature = <110000>;
				hysteresis = <10000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	cpu-0-4-1 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens0 10>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			cpu4_emerg1: cpu4-emerg1-cfg {
				temperature = <108000>;
				hysteresis = <8000>;
				type = "passive";
			};

			cpu4_emerg1_1: cpu4-emerg1-1-cfg {
				temperature = <110000>;
				hysteresis = <10000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	cpu-0-5-0 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens0 11>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			cpu5_emerg0: cpu5-emerg0-cfg {
				temperature = <108000>;
				hysteresis = <8000>;
				type = "passive";
			};

			cpu5_emerg0_1: cpu5-emerg0-1-cfg {
				temperature = <110000>;
				hysteresis = <10000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	cpu-0-5-1 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens0 12>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			cpu5_emerg1: cpu5-emerg1-cfg {
				temperature = <108000>;
				hysteresis = <8000>;
				type = "passive";
			};

			cpu5_emerg1_1: cpu5-emerg1-1-cfg {
				temperature = <110000>;
				hysteresis = <10000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	cpuss-0-0 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&tsens0 13>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	cpuss-0-1 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&tsens0 14>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	aoss-1 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&tsens1 0>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	cpu-1-0-0 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens1 1>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			cpu6_emerg0: cpu6-emerg0-cfg {
				temperature = <108000>;
				hysteresis = <8000>;
				type = "passive";
			};

			cpu6_emerg0_1: cpu6-emerg0-1-cfg {
				temperature = <110000>;
				hysteresis = <10000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	cpu-1-0-1 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens1 2>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			cpu6_emerg1: cpu6-emerg1-cfg {
				temperature = <108000>;
				hysteresis = <8000>;
				type = "passive";
			};

			cpu6_emerg1_1: cpu6-emerg1-1-cfg {
				temperature = <110000>;
				hysteresis = <10000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	cpu-1-1-0 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens1 3>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			cpu7_emerg0: cpu7-emerg0-cfg {
				temperature = <108000>;
				hysteresis = <8000>;
				type = "passive";
			};

			cpu7_emerg0_1: cpu7-emerg0-1-cfg {
				temperature = <110000>;
				hysteresis = <10000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	cpu-1-1-1 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens1 4>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			cpu7_emerg1: cpu7-emerg1-cfg {
				temperature = <108000>;
				hysteresis = <8000>;
				type = "passive";
			};

			cpu7_emerg1_1: cpu7-emerg1-1-cfg {
				temperature = <110000>;
				hysteresis = <10000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	cpuss-1-0 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&tsens1 5>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	cpuss-1-1 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&tsens1 6>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	nsphvx-0 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens1 7>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	nsphvx-1 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens1 8>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	nsphvx-2 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens1 9>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	nsphmx-0 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens1 10>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	nsphmx-1 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens1 11>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	nsphmx-2 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens1 12>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	nsphmx-3 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens1 13>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	ddr {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens1 14>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			ddr_config0: ddr0-config {
				temperature = <90000>;
				hysteresis = <5000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	aoss-2 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&tsens2 0>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	gpuss-0 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens2 1>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			gpu0_tj_cfg: tj_cfg {
				temperature = <95000>;
				hysteresis = <5000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	gpuss-1 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens2 2>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			gpu1_tj_cfg: tj_cfg {
				temperature = <95000>;
				hysteresis = <5000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	gpuss-2 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens2 3>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			gpu2_tj_cfg: tj_cfg {
				temperature = <95000>;
				hysteresis = <5000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	gpuss-3 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens2 4>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			gpu3_tj_cfg: tj_cfg {
				temperature = <95000>;
				hysteresis = <5000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	gpuss-4 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens2 5>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			gpu4_tj_cfg: tj_cfg {
				temperature = <95000>;
				hysteresis = <5000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	gpuss-5 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens2 6>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			gpu5_tj_cfg: tj_cfg {
				temperature = <95000>;
				hysteresis = <5000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	gpuss-6 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens2 7>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			gpu6_tj_cfg: tj_cfg {
				temperature = <95000>;
				hysteresis = <5000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	gpuss-7 {
		polling-delay-passive = <10>;
		polling-delay = <0>;
		thermal-sensors = <&tsens2 8>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			gpu7_tj_cfg: tj_cfg {
				temperature = <95000>;
				hysteresis = <5000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	mdmss-0 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&tsens2 9>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			mdmss0_config0: mdmss0-config0 {
				temperature = <102000>;
				hysteresis = <3000>;
				type = "passive";
			};

			mdmss0_config1: mdmss0-config1 {
				temperature = <105000>;
				hysteresis = <3000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	mdmss-1 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&tsens2 10>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			mdmss1_config0: mdmss1-config0 {
				temperature = <102000>;
				hysteresis = <3000>;
				type = "passive";
			};

			mdmss1_config1: mdmss1-config1 {
				temperature = <105000>;
				hysteresis = <3000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	mdmss-2 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&tsens2 11>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			mdmss2_config0: mdmss2-config0 {
				temperature = <102000>;
				hysteresis = <3000>;
				type = "passive";
			};

			mdmss2_config1: mdmss2-config1 {
				temperature = <105000>;
				hysteresis = <3000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	mdmss-3 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&tsens2 12>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			thermal-hal-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			mdmss3_config0: mdmss3-config0 {
				temperature = <102000>;
				hysteresis = <3000>;
				type = "passive";
			};

			mdmss3_config1: mdmss3-config1 {
				temperature = <105000>;
				hysteresis = <3000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	camera-0 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&tsens2 13>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	camera-1 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&tsens2 14>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	video {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&tsens2 15>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};

	aoss-3 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-sensors = <&tsens3 0>;
		trips {
			thermal-engine-config {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			reset-mon-cfg {
				temperature = <115000>;
				hysteresis = <5000>;
				type = "passive";
			};
		};
	};
};