Add the nodes to enable qrtr communication between primary vm and
oemvm on kera.
This adds platform devices and vdevice descriptions to start the
qrtr gunyah transport on both primary vm and oemvm device trees. This
also adds the device tree node to configure qrtr as node id 21 on oem
vm.
Change-Id: Icdcfcb4872351df13561c2c6963f06094f46d8c6
Signed-off-by: Pranav Mahesh Phansalkar <quic_pphansal@quicinc.com>
1. The high speed phy is required for USB to support HS
usecases. Add eusb node on tuna which includes the
necessary resources for the eusb phy to work.
2. Adds interconnects on KERA USB.
3. QMP phy is used for SS/SSP usb usecases as well as DP use cases
in a target. This change adds the basic resources required along
with the init sequence for functionality.
4. Adding the necessary audio node providing the necessary
resources of the qmi audio to get probed.
5. The GSI event buffers are required for the various GSI related
usecases which are excercised from the dwc3 glue driver.
Add the number of event buffers along with the register offsets
defined.
6. Adding a 4-byte register entry for tcsr_dyn-en-dis to enable/disable USB
dynamically from dwc3-msm-core.
Change-Id: Ia45a09d8d2a54e29ecd0811e97d71c6dd8eaecee
Signed-off-by: Uttkarsh Aggarwal <quic_uaggarwa@quicinc.com>
adding dma-heaps for VM to validate QTVM platform test cases in kera.
Change-Id: I00d270165be4b0c4acecf7fc501d0ec35b459458
Signed-off-by: Ravi Kumar Bokka <quic_c_rbokka@quicinc.com>
GLINK PKT provides a userspace interface to RPMSG GLINK through
character device node. Add the nodes and corresponding channel
devices to enable GLINK communication from userspace.
Change-Id: I2347b12c733459ead821db476e446fbde470c03a
Signed-off-by: Pranav Mahesh Phansalkar <quic_pphansal@quicinc.com>
trust_ui_vm_mem and oem_vm_mem reserved memory nodes are added twice
for Kera. Remove one set of redundant nodes.
Change-Id: If17767b4f4dd6f75786bcb833eba6e10a34bc9ec
Signed-off-by: Hrishabh Rajput <quic_hrishabh@quicinc.com>
Add test nodes for Kera Trusted VM and OEMVM.
Change-Id: I8a5f22920a942df8e04818adee715d58abc74e04
Signed-off-by: Hrishabh Rajput <quic_hrishabh@quicinc.com>
DWC3 host and XHCI plat now communicates the maximum number of interrupters
the XHCI HCD will allocate. Since platforms only require a limited number
of interrupters (i.e. 3) make sure XHCI doesn't allocate more than is
required.
Change-Id: I47ddfb603490afd2ab51d7c7fa9ecf844729eb62
Signed-off-by: Uttkarsh Aggarwal <quic_uaggarwa@quicinc.com>
Enable the UFS MCQ feature on the Tuna platforms.
Change-Id: I0f420831e9af2c3965344c33a042b75196abc1d7
Signed-off-by: Manish Pandey <quic_mapa@quicinc.com>
Add remote debugger device configuration. The Remote Debugger driver
allows a debugger running on a host PC to communicate with a remote
stub running on peripheral subsystems.
Change-Id: I23fa75b2f830a4877aafeeb3aa27d6d4275832ed
Signed-off-by: Devender Kaushik <quic_dkaushik@quicinc.com>
Some devices refer to the GPU node that is populated in a GPU
overlay file. Provide a stub GPU dt node that can be used in the
kera devicetree.
Change-Id: Ic75d95521e0388a2c5617cf4b5fcfe82a0d9496e
Signed-off-by: Harshitha Sai Neelati <quic_hsaineel@quicinc.com>
trust_ui_vm_mem and oem_vm_mem reserved memory nodes are added twice
for Tuna. Remove one set of redundant nodes.
Change-Id: Ia71c3a0a961c00e58869921745b76b1b5d0e8a4f
Signed-off-by: Hrishabh Rajput <quic_hrishabh@quicinc.com>
adding dma-heaps for VM to validate QTVM platform test cases in tuna.
Change-Id: I27944f8504b69c2b7a42424f64373432305cbc40
Signed-off-by: Akhil Budampati <quic_abudampa@quicinc.com>
Currently, the interconnect path for the debug UART instance
(i.e., qupv3_se7_2uart) is not added, resulting in a NOC error
due to missing QUP voting.
To prevent the NOC error, add the interconnect path for the debug
UART instance.
Fixes: 7cb884c241 ("ARM: dts: msm: Add QUPv3 and GPI DT nodes on tuna")
Change-Id: I6a3829638a244c969d274fe118e51cac7fd0f858
Signed-off-by: Prasanna S <quic_prass@quicinc.com>
This change will add usb-role-switch and eud in Tuna.
Change-Id: Id7bfad4e07aae84a6f1434d35e3519bf693905e4
Signed-off-by: Uttkarsh Aggarwal <quic_uaggarwa@quicinc.com>
To support cable detection events from UCSI, updates need to be made
to enable usb role switch and setting up a connection to the UCSI PMIC
glink node.
Change-Id: I2e3b6b1c3e36c4dca612df1e79156d669955070d
Signed-off-by: Uttkarsh Aggarwal <quic_uaggarwa@quicinc.com>
In this change usb_nop has been removed from Tuna RUMI file.
Change-Id: I59992c0f4fde7fbf15b25cc6f8c984b02bd8d283
Signed-off-by: Uttkarsh Aggarwal <quic_uaggarwa@quicinc.com>
Update the following bootargs:
1) Set memhp_default_state to automatically online memory to movable zone
2) Enable memmap_on_memory
3) Align rcu expedited parameters to reduce latency of synchronize_rcu.
Change-Id: I78280accf1ecedbd56378169cb1b0c8af2428ac4
Signed-off-by: Vijayanand Jitta <quic_vjitta@quicinc.com>
Updated the IOMMU address from 0x540 to 0x140 for tuna SDC2.
Change-Id: I47e4c2d0abc710ab4048632d2b84552b5d009e8a
Signed-off-by: Manish Pandey <quic_mapa@quicinc.com>
Currently, the interconnect path for the debug UART instance
(i.e., qupv3_se7_2uart) is not added, resulting in a NOC error
due to missing QUP voting.
To prevent the NOC error, add the interconnect path for the debug
UART instance.
Fixes: 7cb884c241 ("ARM: dts: msm: Add QUPv3 and GPI DT nodes on tuna")
Change-Id: I6a3829638a244c969d274fe118e51cac7fd0f858
Signed-off-by: Prasanna S <quic_prass@quicinc.com>
