Add the bindings for the QSEE IPC interrupt bridge in YAML.
QSEE IPC interrupt bridge driver can forward remote processor
interrupts to tz.
Change-Id: I1714cfc55422338c0d0674774682ab1f7ac5f4a1
Signed-off-by: leihan <quic_leihan@quicinc.com>
Add the bindings for the smp2p sleepstate driver in YAML.
Smp2p sleepstate driver unset the SMP2P PROC_AWAKE_ID bit if Apps
is going into suspend, set it again when Apps comes out of suspend.
By reading this SMP2P bit, the remote side knows when to avoid
sending data.
Change-Id: I5ad0a431a6c9a40d2a08e9f6a864956b49e0aeab
Signed-off-by: leihan <quic_leihan@quicinc.com>
Add the bindings for the glink_pkt driver in YAML.
Change-Id: I666732ccc56c3067187f65926cf4ec5d5645a9cc
Signed-off-by: leihan <quic_leihan@quicinc.com>
Add binding documentation for the Qualcomm Technologies, Inc.
Glink PMIC debug controller device. This device provides an
interface to read and write PMIC registers over PMIC Glink using
a remote subsytem (e.g. DSP). This allows for debugging PMIC
peripherals that would typically only be accessible to the
charger and fuel gauging firmware running on the remote
subsystem. The PMICs may be physically connected using either
SPMI or I2C.
This is a snapshot of qcom,pmic-glink-debug.txt taken as of qcom-6.1
commit 5c116d156aae ("bindings: pmic-glink-debug: Add SPMI bridge bus
support") which was then converted to yaml format.
Change-Id: Ie4b3e188feea28b9c80413b0397eb1658e03835f
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
QTI charger ulog glink device helps to get ulogs from charging
and gauging stack by communicating with charger firmware running
on the remote subsystem (e.g. DSP) over PMIC Glink.
Change-Id: I0c9a6c2413c28c9397cc69092881e3d15f6d6577
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
QTI battery glink debug device helps to get logs and debug
information by communicating with charger firmware running on the
remote subsystem (e.g. DSP) over PMIC Glink.
Change-Id: Ia3d3679ebce4b3f9d3a6e059eca22b7e9458cda7
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Qualcomm Technologies, Inc. (QTI) Programmable Boot Sequence
(PBS) devices help triggering certain PBS on QTI PMICs when
available for APPS.
Change-Id: I9148ff20220b998b1634fb9c26d462b2a25d6586
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Add Qualcomm Technologies, Inc. PMIC PON log device bindings. The
PMIC PON log device parses power-on, power-off, and fault messages
stored in a binary log within the SDAM memory found on some QTI
PMIC devices.
This is a snapshot of the file qcom,pmic-pon-log.txt taken
as of qcom-6.1 branch
commit 8e58283f0a59 ("dt-bindings: soc: qcom: pmic-pon-log:
define bindings for multiple nvmem") which was then converted
to yaml format.
Change-Id: I6256c17a8334e5ae721427c5d4f1d3352dc72daf
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Add documentatio for qdss component coresight-remote-etm. correct
the format of qcom,coresight-csr.yaml.
Change-Id: I024a7245997f51a02118d0abf8bd9932763772fb
Signed-off-by: Yuanfang Zhang <quic_yuanfang@quicinc.com>
The altmode mode device provides an interface for Type-C alternate mode
clients to receive data such as Pin Assignment Notifications from the
Type-C stack running on a remote subsystem (e.g. DSP) via the PMIC GLINK
interface.
This is a snapshot taken as of qcom-6.1
commit 956e9008b1cf ("bindings: Add altmode-glink")
which was then converted to yaml.
Change-Id: Iec1cf5e64ed9b4eb93fbfa6aacc998d4f4f730e7
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
The PMIC Glink device provides the interface for clients to
communicate over GLink for sending/receiving data to/from
charger firmware that runs on a remote subsystem (e.g. ADSP)
which supports charging and gauging. Add the bindings for it.
This is a snapshot taken as of qcom-6.1
commit 2927dc2d179b ("bindings: add support for
qcom,pmic-glink") which was then converted to yaml.
Rename qcom,pmic-glink.yaml to qcom,qti-pmic-glink.yaml to
avoid a conflict with the independent upstream implementation
of this file.
Change-Id: Ia4f5ff346ebfa773bc0fe3d0410626ea67e1da31
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Add snapshot of device tree bindings from keystone common kernel, branch
"android-mainline-keystone-qcom-release" at c4c12103f9c0 ("Snap for 9228065
from e32903b9a63bb558df8b803b076619c53c16baad to
android-mainline-keystone-qcom-release").
Change-Id: I7682079615cbd9f29340a5c1f2a1d84ec441a1f1
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
