WLAN has a requirement to trigger a PBS sequence for XO
calibration for factory testing. As part of this feature
expose a new register under PMK8550 SDAM2, which will
be used by PBS for reading XO trims settings.
Change-Id: I620b2d9d0ca6b7452f693ff665ddf995f17e4e2c
Signed-off-by: Kamal Wadhwa <quic_kamalw@quicinc.com>
Add ldo-ocp notifier support for tuna for platforms.
Change-Id: I46c1feb2f4ff2da3945f9ad445eb5d99f81f7af4
Signed-off-by: Kavya Nunna <quic_knunna@quicinc.com>
Added initial device tree for QCS610 LE target.
Change-Id: Ia8b8790fa0916a8a87a5bc696f5b9e23d7e951dc
Signed-off-by: Kunal Singh Ranawat <quic_kranawat@quicinc.com>
Add devicetree support for Tuna7 and TunaP SoC.
Change-Id: I5f94559c66f00bcb746fc05f7c445a8e2501d862
Signed-off-by: Hrishabh Rajput <quic_hrishabh@quicinc.com>
Update memory map for kera, inline with v4.
Change-Id: Ifc5acdc379372239f4fde0f22fcd8c17f66ce636
Signed-off-by: Bibek Kumar Patro <quic_bibekkum@quicinc.com>
According to the Hardware Programming Guide, when going into hibern8,
select XO clock (RPMH_CXO_CLK) clock as the parent of the phy symbol
mux clocks (GCC_UFS_PHY_RX/TX_SYMBOL_0/1_CLK_SRC). When exiting the
hibern8, select the phy symbol clocks (UFS_PHY_RX/TX_SYMBOL_0/1_CLK)
as the parent of the phy symbol mux clocks.
Change-Id: I624f98c39b7548dc2a9a5207d82600bb69ac41d5
Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Increase the number of pipe clock toggles that will occur after
phystatus goes high at the output of the PHY during L1SS/P2 entry
in PCS_PCIE_POWER_STATE_CONFIG6 register, so that if the phy and
controller goes out of sync this may help us. The number of pipe
clock toggles is equal to (4*value)+1.
Change-Id: I7a31882f18879ef990825aa2d978fc7f39233472
Signed-off-by: Vivek Pernamitta <quic_vpernami@quicinc.com>
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Add the soc-specific compatible string as it is
required to apply appropriate keepout regions.
Change-Id: I59fe0c9dffdf182bfb52468ef5a0d564ad7a8b38
Signed-off-by: Saranya R <quic_sarar@quicinc.com>
Add dtsi node to enable Hardware key manager for monaco target.
And add the device tree bindings for the Hardware key manager driver.
Change-Id: If1e38c3c71148fd85058eb31d4eee5f806e47fef
Signed-off-by: Shivangi Kesharwani <quic_skesharw@quicinc.com>
Reserve 16kb to dcc on TZ while HLOS have 16 KB.
Change-Id: I2063be0924b5719bd2c3abfffc84c0044d74ae37
Signed-off-by: Yingchao Deng <quic_yingdeng@quicinc.com>
Add devices to track CPU LPMs, SoC level LPMs, and system pm
violators.
Change-Id: I65a0dfeb814b47bdfcc4468ec8f1e7f63338581c
Signed-off-by: Sneh Mankad <quic_smankad@quicinc.com>
Update the slave address for slave charger debug support.
As well as update the slave address for glink adc channels
to fix reading I/O errors.
Change-Id: If1a0725aeeb1a67d7a19a3a5629ca2be44ff674c
Signed-off-by: Tingguo Cheng <quic_tingguoc@quicinc.com>
Fix the memory mapping error for non dma-coherent target Monaco
when iommu-dma is used as "fastmap" by changing it to "atomic".
Hence, Change iommu-dma to atomic setting.
Change-Id: Ic21cbd4d5e9e429dd6aa577652d0ccb1a9acc99c
Signed-off-by: Viken Dadhaniya <quic_vdadhani@quicinc.com>
