Correct the SID ranges for the cam_hf qtb and the mdp_hf
qtbs.
Change-Id: I0d6127248bbfac122d14ca2c600dd81d3a7d5550
Signed-off-by: Oreoluwa Babatunde <quic_obabatun@quicinc.com>
Add qcom,sensitive property in vm-config node for Sun VM.
Change-Id: I5b2781df510f59d7c3f779eecb55c7bc64fad84c
Signed-off-by: Hrishabh Rajput <quic_hrishabh@quicinc.com>
Add devicetree soccp node for Sun SoC. In addition to existing smp2p INT's
SOCCP H/W needs 2 more INT for controlling the power state of the H/W.
sleep bit and wakeup bit on master kernel corresponds to these INT.
Change-Id: I00d2f6a3fb76f306fa070df87f22bb2d07cb4c3b
Signed-off-by: Gokul krishna Krishnakumar <quic_gokukris@quicinc.com>
Add VADC GEN4 channels provided by pmk8550 that are used by thermal
clients on Sun. Also, add the corresponding thermal zone devices.
Change-Id: Ia1eca3b4eb5e95612590ec2405bb366ed170c60a
Signed-off-by: Minghao Zhang <quic_minghao@quicinc.com>
Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
Add thermal mitigation step for sun boards so that clients like
thermal SW can do thermal mitigation via charge_control_limit
property under battery power supply.
Change-Id: I0a4ec6e466d5cc52577a28334ec66eddcaf35ef5
Signed-off-by: Subbaraman Narayanamurthy <quic_subbaram@quicinc.com>
Add DT support for ATP variant on Sun SoC.
Change-Id: Icb07c87ca0ed07c81e0d3bf42e5c69147d6f1807
Signed-off-by: Unnathi Chalicheemala <quic_uchalich@quicinc.com>
This reverts commit 0d05778dbb.
Enable UFS LPM support.
Change-Id: I6e65310ad1ca98fc20fc148dac3f342375638841
Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Use 0x17 pmu event as miss-ev in llcc memlat for sun.
Change-Id: Ifbd710d9fcb24f7442f2b6d6d8e94f858e48c326
Signed-off-by: Amir Vajid <quic_avajid@quicinc.com>
Enable low power modes for sun through kernel command
line parameters.
Change-Id: Ifd4b8fcce8d6b2c0b4f6a4c2dcb088ae8c8fa661
Signed-off-by: Rashid Zafar <quic_rzafar@quicinc.com>
Common DT format for sd card changes across targets.
Change-Id: I6d3fc5141ed8e73882dcf0f95706501b8208164b
Signed-off-by: Ziqi Chen <quic_ziqichen@quicinc.com>
Add qrtr node to enable qrtr communication with the primary
vm from the trusted vm.
Change-Id: I05d3a75efebfbefc1e782f7ff7c7b01abe7e0245
Signed-off-by: Kishore Kumar Ravi <quic_kiskum@quicinc.com>
This reverts commit b57a26b88e.
There is an issue with MCQ mode. We need some time to fix
the issue, so revert to legacy UFS mode for now.
Change-Id: Iaf9a3332ba23fe3bd2be4900c79698ed32903efc
Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
With commit (851140def4: Allow memory from lower 4G for adsp/cdsp/modem)
We were limiting addresses to below 4GB for ADSP/CDSP metadata passed to
TZ. The issue with S1/S2 mapping is caused by a flag in the hyp config
file, removing the restriction for ADSP/CDSP metadata memory.
Change-Id: Id42350a8ab2ddff3c74104f610d83a70681c23c6
Signed-off-by: Gokul krishna Krishnakumar <quic_gokukris@quicinc.com>
Corrected/rectified dma nodes for qup2 i3c instances,
and also added ibi-controller id changes.
Change-Id: I2bbc7391fce38c231c57327547573e0de0d774c0
Signed-off-by: Anil Veshala Veshala <quic_aveshala@quicinc.com>
In pinctrl file there is extra space in function name for
qup1_se0_l1, which is leading to ios lines not in good state.
To solve the removed extra space.
Change-Id: I79b34f15bcf3eb52ac950876b3339c77d036983d
Signed-off-by: Anil Veshala Veshala <quic_aveshala@quicinc.com>
Disable tpdm pcie-rscc and spss because some related clk can not
be enabled from kernel side.
Change-Id: I17d393c5ccf757198632eba15f133aae0182a05e
Signed-off-by: Yuanfang Zhang <quic_yuanfang@quicinc.com>
Set the proper EUD UTMI switch delay for when EUD moves between modes.
This allows for the delay to be decreased, which addresses USB core soft
reset timeouts.
Change-Id: Id3f02ad4f14b68977baa3393c692360a762b0ee2
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Sun boards that utilize the V8 power grid have a PM8550VE PMIC in
place of a PM8550VS one for the "F" PMIC at SPMI SID=5. Several
FTSMPS regulators are ganged together differently and some supplies
are shuffled around. These are the impacts for RPMh managed
regulator resources:
V6 Power Grid V8 Power Grid
S4J WCN_CX XX
S5F XX WCN_CX
S6F VDD_MXA XX
S8F N/A VDD_MXA
Update the device tree configurations for V8-specific overlays so
that the correct set of PMIC resources is present.
Change-Id: I035b8dfc87703b7681110a757952005bbdbf8a63
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Add a PMIC PM8550VE_F device along with its peripheral device
subnodes. This PMIC is found on Sun boards that use the V8
power grid instead of PMIC PM8550VS_F.
Change-Id: Idf4de30a6ceb891f563341bad0e0da21dca38b69
Signed-off-by: David Collins <quic_collinsd@quicinc.com>
Add modem related thermal sensors and mitigation devices for sun which
would be accessible over QMI. Add respective thermal zone and trips
for modem thermal sensors.
Change-Id: Iefef9a70d8c213a406d7eb98df43c61f46fddd87
Signed-off-by: Rashid Zafar <quic_rzafar@quicinc.com>
Add the device nodes on sun oemvm and vm to enable qmsgq socket
communication over gunyah message queues.
Change-Id: Ib28b1204006819ef9fe044586dbaada64d826b4a
Signed-off-by: Kishore Kumar Ravi <quic_kiskum@quicinc.com>
Update bootargs for Sun SoC to align with existing SoCs.
Change-Id: I50c16ddabc4559b84f815d10956c36b63dbafd00
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Enable the qrtr gunyah transport for sun. This enables the QRTR
Gunyah transport on the primary VM which kickstarts the qrtr protocal
between tuivm and pvm.
Change-Id: I6cc9d73d087107de9153a781aea255a077f8ee0c
Signed-off-by: Kishore Kumar Ravi <quic_kiskum@quicinc.com>
Find my device (FMD) feature uses SDAM offset 0x9a for enabling
or disabling the feature in Sun platforms. Add the configuration
to support it.
Change-Id: I76cd1cc8146cdf08af544db474637858ab88211e
Signed-off-by: Subbaraman Narayanamurthy <quic_subbaram@quicinc.com>
Update scm node to include dload-mode register needed
to set the proper download mode.
Change-Id: I2f2075ec43f1ba452fff6077685afcf6dc7912be
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
