Replace swr node with default as swr core does not detect.
Change-Id: Ibe40453c70867c9687bd01ca9345dae8080bafac
Signed-off-by: Ravulapati Vishnu Vardhan Rao <quic_visr@quicinc.com>
This change reverts the commented section of BOB and
wcd_usbss as they are depended on kernel change.
Change-Id: I9fad7ce9732d7ec776ee3f14142129e406398c0f
Signed-off-by: Ravulapati Vishnu Vardhan Rao <quic_visr@quicinc.com>
Set qcom,wcn-bt flag to 1 to enable BTFM related dailinks.
Change-Id: Iba9adc538fcc0f5464a85f6099779993dfa881b2
Signed-off-by: Ravulapati Vishnu Vardhan Rao <quic_visr@quicinc.com>
-Disable swr haptics for qrd.
Change the wsa-codec index from 2 to 1.
and connect WSA_SPK1 OUT instead of WSA_SPK2 OUT
change the prefix of wsa as SpkrLeft.
Change-Id: I99ac02d92326641432011a8fe88c41dd52d03f3b
Signed-off-by: Yuhui Zhao <quic_yuhuzhao@quicinc.com>
- Remove amic5 entries from tuna overlay as only 4 mics are supported in
tuna wcd codecs
Change-Id: I0d3159a67c288f4ee61613ec291c274a8c2325a1
Signed-off-by: Kisan Yadav <quic_kisany@quicinc.com>
Need to revert once kernel changes are in place.
Change-Id: I96caf7ca9b78421b9c25b6ddc5ef6fd2a71b9d9a
Signed-off-by: Ravulapati Vishnu Vardhan Rao <quic_visr@quicinc.com>
-Add and update MSM_ID for tuna7.
-Add Board_Id for tuna7.
-Add AATC support for tuna7 platform.
Change-Id: I7f470c0150ec95b556087ab6797787b9754e8464
Signed-off-by: Ravulapati Vishnu Vardhan Rao <quic_visr@quicinc.com>
Update the bcs signal port for Tuna,
the bcs is on DP4 CH3.
Change-Id: Icaf2239a0da5f332124a726db0edde05aa67bb1e
Signed-off-by: Ravulapati Vishnu Vardhan Rao <quic_visr@quicinc.com>
Correction of i2s nodes in overlay and lpi files in
Tuna platform.
Change-Id: I4195ce95a8d871f4a5bc5e8ab6ddf0286d14aec4
Signed-off-by: Ravulapati Vishnu Vardhan Rao <quic_visr@quicinc.com>
Add support for tuna audio device tree entree.
Change-Id: Ic85de2ab888e4c4b9874775492e0650fdcc72d8f
Signed-off-by: Vangala, Amarnath <quic_avangala@quicinc.com>
Update clk div factor entries for TX and VA macros to reflect
proper HW configuration.
Change-Id: I29d5d4fb0fbbae4b2bd3c121f1b6f7a6d34e9cd2
Signed-off-by: Vangala, Amarnath <quic_avangala@quicinc.com>
In LL use-case GPR callback thread was in unable state.
In normal thread and not in RT thread.
Which causes pop noise issue.
It needs to set glink-adsp_apps thread priority to be RT.
This Configuration enables Client to set the configuration thread
to be in RT.
Change-Id: I2b6512ad06353cbcae30706fa27326210661dc0c
Signed-off-by: Ravulapati Vishnu Vardhan Rao <quic_visr@quicinc.com>
Update iommu address as per CNSS changes as audio and CNSS share
same address space.
Change-Id: I3f31a7d2bd0c3324051bedf9b733081f7cfa7879
Signed-off-by: Satish Babu Patakokila <quic_spatakok@quicinc.com>
Add USB HS threshold which is needed by Special category HeadSets
to get detected.
Change-Id: I9ab8dce79778d14f85ca73bfd0a03de1ade39f4c
Signed-off-by: Ravulapati Vishnu Vardhan Rao <quic_visr@quicinc.com>
Add 3.5mm support for Hamilton V8 power grid for MTP platform on Sun.
Change-Id: Ieac5d60a7da391906844da1a5b254a10a72f4a8d
Signed-off-by: Ravulapati Vishnu Vardhan Rao <quic_visr@quicinc.com>
eNPU HW schedular access is denied for audio usecases . Update right SID
to get eNPU access.
Change-Id: Ic8884eca7873c07fec11cc00ce59dd408aa190c4
Signed-off-by: Vidyakumar Athota <quic_vathota@quicinc.com>
Add support for QMP mic on Sun r2 hamilton
MTP variants.
Change-Id: I71a33aa6955d54645ce9d6a5d9f7b4247a9eecef
Signed-off-by: Phani Kumar Uppalapati <quic_phaniu@quicinc.com>
Enables adsp loader to trigger adsp ssr through
/sys/kernel/boot_adsp/ssr.
Remove property qcom,adsp-state to skip loading
adsp through /sys/kernel/boot_adsp/boot.
Change-Id: I298166bc079e60937247b2c130114e8d107b69c0
Signed-off-by: Zhou Song <quic_zhous@quicinc.com>
Add new property to enable haptics vi sense.
Change-Id: Ia6f0291eb73a97964ee0c4f7da6f8ac27fd1d4a6
Signed-off-by: Deepali Jindal <quic_deepjind@quicinc.com>
