WLAN has a requirement to trigger a PBS sequence for XO calibration
for factory testing. To support this, expose a new register under
PMK8550 SDAM2 for clients to write input data into and a new PBS
regulator on which clients can vote to trigger the PBS sequence.
Change-Id: I0e4882d842ea57def4dfdfe4baa5e606a3847f40
Signed-off-by: Kamal Wadhwa <quic_kamalw@quicinc.com>
WLAN has a requirement to trigger a PBS sequence for XO
calibration for factory testing. As part of this feature
expose a new register under PMK8550 SDAM2, which will
be used by PBS for reading XO trims settings.
Change-Id: I620b2d9d0ca6b7452f693ff665ddf995f17e4e2c
Signed-off-by: Kamal Wadhwa <quic_kamalw@quicinc.com>
WLAN has a requirement to trigger a PBS sequence for XO calibration
for factory testing. To support this, expose a new register under
PMK8550 SDAM2 for clients to write input data into and a new PBS
regulator on which clients can vote to trigger the PBS sequence.
Change-Id: Ia314c8cba7a6205943b99e7530990ea6dde8b09c
Signed-off-by: Kamal Wadhwa <quic_kamalw@quicinc.com>
This change removes support for display clock scaling
through mmrm is not supported in kera target.
Change-Id: Idb83968784dcd1e6cabc5bc107a5bd8013612686
Signed-off-by: Mahadevan <quic_mahap@quicinc.com>
Signed-off-by: lnxdisplay <lnxdisplay@localhost>
Correct the port mask of mbhc port.
Since the WCD_SWR_TX DATA0 voltage was incorrect
with default setting, but was correct when
the ADC_LP was running in the swrm bus 9.6mhz,
So copy the SWR_UC0(9.6mhz) to SWR_UC1(4.8mhz).
Change-Id: I3638349a6ebec06b8f4a828498e1285579361e45
Signed-off-by: Yuhui Zhao <quic_yuhuzhao@quicinc.com>
Add ldo-ocp notifier support for tuna for platforms.
Change-Id: I46c1feb2f4ff2da3945f9ad445eb5d99f81f7af4
Signed-off-by: Kavya Nunna <quic_knunna@quicinc.com>
Update frequency plan as per the latest recommendation.
updating PS#5 of Ibdd4774022e90ebc0c670ce2cadc071b988698d4
Change-Id: I4aca1dfe66a24e80471ad22a5c1f373d7b2a4e16
Signed-off-by: Rohit Jadhav <quic_rbjadhav@quicinc.com>
Add device tree bindings for arm,arch-cache node.
Change-Id: I46acfdd171e297368d6bedc431af7dd1270909f8
Signed-off-by: Asit Shah <quic_asitshah@quicinc.com>
Only add wcn-bt-ext for enabling second bt backend for needed dtsi file.
Change-Id: I42ca1840019a9db7d02ac39092f15dd438ea334f
Signed-off-by: MingShu Pang <quic_mpang@quicinc.com>
Remove lpass_bt_swr in ssr devs as bt_swr is disabled in
Kera cdp variant.
Change-Id: Idd149e79b09c1cd3db57100887c3e187bd8420c8
Signed-off-by: Ravulapati Vishnu Vardhan Rao <quic_visr@quicinc.com>
Add wcd usbss node for CDP to detect mic from wcd usbss driver.
Change-Id: Ic7fbab156a2dda2185a80c96d6589764ca66b57d
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
This change adds the entries of qusb phys and
usb bam in yaml format.
Change-Id: I5697f28cf786ab6cc61c462a164ff4b0e4e68aac
Signed-off-by: Rajkumar Patel <quic_rajkpate@quicinc.com>
Add devicetree support for Tuna7 and TunaP SoC.
Change-Id: I5f94559c66f00bcb746fc05f7c445a8e2501d862
Signed-off-by: Hrishabh Rajput <quic_hrishabh@quicinc.com>
(cherry picked from commit b0ed9373e7)
Update clk div factor entries for TX and VA macros to reflect
proper HW configuration.
Change-Id: Iecc4f684aaf90dc671ed850c0c159e0b7eeaa42c
Signed-off-by: Ravulapati Vishnu Vardhan Rao <quic_visr@quicinc.com>
Only add wcn-bt-ext for enabling second bt backend for needed dtsi file.
Change-Id: I42ca1840019a9db7d02ac39092f15dd438ea334f
Signed-off-by: MingShu Pang <quic_mpang@quicinc.com>
Increase DVDD initial voltage from 1.06V to 1.09V. Also increase
the min voltage voting to 1.09V for CDP and MTP platforms of Tuna.
This is to avoid any voltage drop issue on the DVDD rail similar
to Tuna QRD platform.
Change-Id: I77eabf294777130059bac6f748cc5c0f4a7d0002
Signed-off-by: Abhinav Saurabh <quic_abhisaur@quicinc.com>
Signed-off-by: lnxdisplay <lnxdisplay@localhost>
Added initial device tree for QCS610 LE target.
Change-Id: Ia8b8790fa0916a8a87a5bc696f5b9e23d7e951dc
Signed-off-by: Kunal Singh Ranawat <quic_kranawat@quicinc.com>
