Update S1G min/max & initial voltage for tuna-kiwi platform.
While at it make below changes
1.Disable the unused rails for tuna boards.
2. Update always-on property for L3G for RCM kiwi platform
for FMD feature.
Change-Id: I92e01d48b5c3cb9f64b6aa7be37c0ebb27f378b7
Signed-off-by: Kavya Nunna <quic_knunna@quicinc.com>
Remove sys-therm-1 vadc channel as it is handled
in other subsystems.
Change-Id: If80f2f5ffcf0299ad15537189c5ef1337e8ae87e
Signed-off-by: Kavya Nunna <quic_knunna@quicinc.com>
Add cpufreq cycle counter register information to devicetree in a
separate node.
Change-Id: Ib9c21300cda585d4f25be12cb9527d719eb630ea
Signed-off-by: Atul Pant <quic_atulpant@quicinc.com>
Remove the list of GPIOs reserved for CXM UART2(111,112)
as it is no longer required.
Change-Id: I8fafe3005019e3df68ab6cf065d67f684401ecce
Signed-off-by: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
Commit e3eceb0 (pinctrl:qcom:Add support for Kera SoC in pin control)
updates the UFS_RESET pin from 184 to 185. This commit updates kera
UFS 'reset-gpios' to 185 to ensure proper functioning of UFS.
Change-Id: I9b850a7c997303b467b6fea4a64bc19ec3e6372c
Signed-off-by: Manish Pandey <quic_mapa@quicinc.com>
Updated the IOMMU address from 0x540 to 0x140 for tuna SDC2.
Change-Id: I47e4c2d0abc710ab4048632d2b84552b5d009e8a
Signed-off-by: Manish Pandey <quic_mapa@quicinc.com>
This change adds display heap region for kera target.
Change-Id: I2634e6c673a2a4e2bcf5c6903eb9be310044562d
Signed-off-by: Sampurna Bolloju <quic_sampboll@quicinc.com>
Use alias to reduce dev mistake of not using
proper path for serial console.
Change-Id: Ie588cc39b8f9e167b323abb9901114b547c278fc
Signed-off-by: Wasim Nazir <quic_wasimn@quicinc.com>
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Remove sys-therm-1 thermal zone from tuna thermal zone
list as it is taken care in mpss side.
Fix typo in label names for adc channel names for pm8550ve
and pm8550vs and update io channels for pmxr2230_tz.
Change-Id: I6f4c772a3fc662f0d8685ea1f4672fc8ebea46d7
Signed-off-by: Kavya Nunna <quic_knunna@quicinc.com>
This change will add usb-role-switch and eud in Tuna.
Change-Id: Id7bfad4e07aae84a6f1434d35e3519bf693905e4
Signed-off-by: Uttkarsh Aggarwal <quic_uaggarwa@quicinc.com>
Enable touch support for Kera on MTP, CDP and QRD platforms.
Change-Id: Ic201de06c7bc78a71ca163dd63a1ebd3caf1812e
Signed-off-by: Anand Tarakh <quic_atarakh@quicinc.com>
