Add the Level Shifter's external feedback clock entry to support
the SD card HS50 mode running at 50MHz.
By default, the Sun platforms use the Level Shifter devices with
external feedback clock signal connects back to the MSM in order
for the HS50 mode to work at 50MHz. Without the external feedback
clock, the HS50 mode works at reduced frequency at 37.5MHz.
Change-Id: I56c61411d7f792a389fa85661fce7fa5074e2c9f
Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
WLAN has a requirement to trigger a PBS sequence for XO calibration
for factory testing. To support this, expose a new register under
PMK8550 SDAM2 for clients to write input data into and a new PBS
regulator on which clients can vote to trigger the PBS sequence.
Change-Id: I0e4882d842ea57def4dfdfe4baa5e606a3847f40
Signed-off-by: Kamal Wadhwa <quic_kamalw@quicinc.com>
WLAN has a requirement to trigger a PBS sequence for XO
calibration for factory testing. As part of this feature
expose a new register under PMK8550 SDAM2, which will
be used by PBS for reading XO trims settings.
Change-Id: I620b2d9d0ca6b7452f693ff665ddf995f17e4e2c
Signed-off-by: Kamal Wadhwa <quic_kamalw@quicinc.com>
WLAN has a requirement to trigger a PBS sequence for XO calibration
for factory testing. To support this, expose a new register under
PMK8550 SDAM2 for clients to write input data into and a new PBS
regulator on which clients can vote to trigger the PBS sequence.
Change-Id: Ia314c8cba7a6205943b99e7530990ea6dde8b09c
Signed-off-by: Kamal Wadhwa <quic_kamalw@quicinc.com>
Add ldo-ocp notifier support for tuna for platforms.
Change-Id: I46c1feb2f4ff2da3945f9ad445eb5d99f81f7af4
Signed-off-by: Kavya Nunna <quic_knunna@quicinc.com>
Added initial device tree for QCS610 LE target.
Change-Id: Ia8b8790fa0916a8a87a5bc696f5b9e23d7e951dc
Signed-off-by: Kunal Singh Ranawat <quic_kranawat@quicinc.com>
Add devicetree support for Tuna7 and TunaP SoC.
Change-Id: I5f94559c66f00bcb746fc05f7c445a8e2501d862
Signed-off-by: Hrishabh Rajput <quic_hrishabh@quicinc.com>
Update memory map for kera, inline with v4.
Change-Id: Ifc5acdc379372239f4fde0f22fcd8c17f66ce636
Signed-off-by: Bibek Kumar Patro <quic_bibekkum@quicinc.com>
According to the Hardware Programming Guide, when going into hibern8,
select XO clock (RPMH_CXO_CLK) clock as the parent of the phy symbol
mux clocks (GCC_UFS_PHY_RX/TX_SYMBOL_0/1_CLK_SRC). When exiting the
hibern8, select the phy symbol clocks (UFS_PHY_RX/TX_SYMBOL_0/1_CLK)
as the parent of the phy symbol mux clocks.
Change-Id: I624f98c39b7548dc2a9a5207d82600bb69ac41d5
Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Increase the number of pipe clock toggles that will occur after
phystatus goes high at the output of the PHY during L1SS/P2 entry
in PCS_PCIE_POWER_STATE_CONFIG6 register, so that if the phy and
controller goes out of sync this may help us. The number of pipe
clock toggles is equal to (4*value)+1.
Change-Id: I7a31882f18879ef990825aa2d978fc7f39233472
Signed-off-by: Vivek Pernamitta <quic_vpernami@quicinc.com>
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Add the soc-specific compatible string as it is
required to apply appropriate keepout regions.
Change-Id: I59fe0c9dffdf182bfb52468ef5a0d564ad7a8b38
Signed-off-by: Saranya R <quic_sarar@quicinc.com>
Add dtsi node to enable Hardware key manager for monaco target.
And add the device tree bindings for the Hardware key manager driver.
Change-Id: If1e38c3c71148fd85058eb31d4eee5f806e47fef
Signed-off-by: Shivangi Kesharwani <quic_skesharw@quicinc.com>
Reserve 16kb to dcc on TZ while HLOS have 16 KB.
Change-Id: I2063be0924b5719bd2c3abfffc84c0044d74ae37
Signed-off-by: Yingchao Deng <quic_yingdeng@quicinc.com>
Add devices to track CPU LPMs, SoC level LPMs, and system pm
violators.
Change-Id: I65a0dfeb814b47bdfcc4468ec8f1e7f63338581c
Signed-off-by: Sneh Mankad <quic_smankad@quicinc.com>
Update the slave address for slave charger debug support.
As well as update the slave address for glink adc channels
to fix reading I/O errors.
Change-Id: If1a0725aeeb1a67d7a19a3a5629ca2be44ff674c
Signed-off-by: Tingguo Cheng <quic_tingguoc@quicinc.com>
