Split iomemory-ranges for parrot-vm to be inline
with AC aperture settings.
Change-Id: I6dbf890bd607d916d2429577af6ad164e3cd51db
Signed-off-by: Swetha Chikkaboraiah <quic_schikk@quicinc.com>
Add ufs proxy power supply to add an additional vote for VCCQ LDO.
In case of ufs shutdown, UFS VCCQ LDO would be turned off by PMIC
regulator itself.
Change-Id: I210474d8856f8b1160cc707db17898b1c0403093
Signed-off-by: Manish Pandey <quic_mapa@quicinc.com>
Increase cma size by 4MB for use by memshare IMS usecase.
This is inline with sun.
Change-Id: I81f6da44aa02c00c895854d69dbd949b70f541ff
Signed-off-by: Vijayanand Jitta <quic_vjitta@quicinc.com>
Add thermal overlay support for kera and tuna.
Change-Id: I87a87a173715e9d748e8bab7250d34530be03554
Signed-off-by: Priyansh Jain <quic_priyjain@quicinc.com>
no-amc tag is intended to be used for camera voter
and using it with display voter will lead to display
underruns as AMC votes will not get committed.
Change-Id: I94df2e368d15d6266109cd83e473bb0b5dab4e08
Signed-off-by: Raviteja Laggyshetty <quic_rlaggysh@quicinc.com>
Add support for QRD platform which uses moselle attach
with UFS2 in kera.
Change-Id: Idc6b8cf4418bda35e5d3b047e980370625ab00b6
Signed-off-by: Wasim Nazir <quic_wasimn@quicinc.com>
Separate common files and create module specific files.
Common platform changes should go into platform specific
common files like kera-mtp.dtsi & module specific changes
should go into corresponding module specific files like
kera-mtp-wcn7750-ufs4.dtsi.
Change-Id: Ib8b9fa2609d7dfd883a155af9ffc54ff1fc93d79
Signed-off-by: Wasim Nazir <quic_wasimn@quicinc.com>
Add the eUSB2 repeater node and references for PM7550BA and
PMIV010x.
pm7550ba -> ATP and MTP.
pmib010x -> QRD and CDP.
Change-Id: If971486537915c1f3b8e13a66d294e1fef2596cd
Signed-off-by: Uttkarsh Aggarwal <quic_uaggarwa@quicinc.com>
Change https://lore.kernel.org/all/20230525113034.46880-1-tony@atomide.com
registers serial core controller as a child of msm uart device.
Since child should suspend first, due to the child's auto suspend
delay (SERIAL_PORT_AUTOSUSPEND_DELAY_MS), additional 500msecs
delay is added during msm_geni_serial_runtime_suspend.
Added new dtsi flag 'qcom,suspend-ignore-children', to ignore
dependencies on children by runtime PM framework, this helps to
exit quickly from msm_geni_serial_runtime_suspend and save power.
Signed-off-by: Visweswara Tanuku <quic_vtanuku@quicinc.com>
Signed-off-by: Panicker Harish <quic_pharish@quicinc.com>
Temporarily disable mem-offline node in tuna to resolve
bootup crash due to page allocation from movable zone.
The bad page state was reported for Movable zone
[ 84.281664][ T1622] BUG: Bad page state in process Jit thread pool pfn:a22bfe
[ 84.291750][ T1622] page:fffffffe268aff80 refcount:-1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xa22bfe
[ 84.301978][ T1622] flags: 0x4000000000000000(zone=2|kasantag=0x0)
[ 84.312225][ T1622] page_type: 0xffffffff()
[ 84.342884][ T1622] page dumped because: nonzero _refcount
[ 84.385712][ T1622] page last allocated via order 0, migratetype Unmovable, gfp_mask 0x140dc2(GFP_HIGHUSER|GFP_COMP|GFP_ZERO),pid1462, tgid 1434 (binder:1434_1), ts 73871020589, free_ts 82485610563
<https://android-review.googlesource.com/c/kernel/common/+/3345971>
This fixes the bootup crash by TAO preventing page allocation
from movable zone but will land in QCOM branches through LTS.
Once landed revert back this temporary change.
Change-Id: Ibde1fab99236e3d44356ba412d53eac8da4cee03
Signed-off-by: Vijayanand Jitta <quic_vjitta@quicinc.com>
Currently, the static gpii mask for gpi_dma0 is incorrectly
set to 0x20, which is resulting in i2c read failure.
To prevent this i2c read failure, the static gpii mask
value for gpi_dma0 needs to be updated to 0x40.
'Fixes: 5d97d9eda4527 ("ARM: dts: msm: Add memory and clock
support for vm ravelin")'.
Change-Id: I4f1785b1f1544e436e511af2622ccf365f3cbcfe
Signed-off-by: Prakash Yadachi <quic_pyadachi@quicinc.com>
Temporarily disable mem-offline node in tuna to resolve
bootup crash due to page allocation from movable zone.
The bad page state was reported for Movable zone
[ 84.281664][ T1622] BUG: Bad page state in process Jit thread pool pfn:a22bfe
[ 84.291750][ T1622] page:fffffffe268aff80 refcount:-1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xa22bfe
[ 84.301978][ T1622] flags: 0x4000000000000000(zone=2|kasantag=0x0)
[ 84.312225][ T1622] page_type: 0xffffffff()
[ 84.342884][ T1622] page dumped because: nonzero _refcount
[ 84.385712][ T1622] page last allocated via order 0, migratetype Unmovable, gfp_mask 0x140dc2(GFP_HIGHUSER|GFP_COMP|GFP_ZERO),pid1462, tgid 1434 (binder:1434_1), ts 73871020589, free_ts 82485610563
<https://android-review.googlesource.com/c/kernel/common/+/3345971>
This fixes the bootup crash by TAO preventing page allocation
from movable zone but will land in QCOM branches through LTS.
Once landed revert back this temporary change.
Change-Id: I18b72d87168671987168f905d2e14d85f8b109fe
Signed-off-by: Vijayanand Jitta <quic_vjitta@quicinc.com>
Add entries to specify the dev-id, net-id and low-latency fields
to configure forwarding in qrtr-mhi transport for HMT and HSP.
Forwarding via APPS qrtr-mhi should be disabled in case of HMT
(dev-id:1107) since there's a direct MHI satellite path between
ADSP and WLAN, and should be enabled for HSP (dev-id:1103).
Change-Id: I2aa50121134eceff403f5dc3ad9588820963e05f
Signed-off-by: Pranav Mahesh Phansalkar <quic_pphansal@quicinc.com>
Update bootargs to make it compatible
with pre-sil.
Change-Id: Ifed16d126603556a1a4e11e4ce4a630d8a50c978
Signed-off-by: Wasim Nazir <quic_wasimn@quicinc.com>
Update S1G regulator support for tuna atp as it has kiwi
by default.
While at it, Disable some unused nodes for tuna spmi debug bus.
Change-Id: I28f697b11c4bd5cdaf3cfd0eaa0a9397b415e3fa
Signed-off-by: Kavya Nunna <quic_knunna@quicinc.com>
Remove CXM UART2 GPIO(100,116) from list of reserved GPIOs
as it is not PORed.
Change-Id: I18eaacf40ce766dab0e2c546f62829a06384b84a
Signed-off-by: Wasim Nazir <quic_wasimn@quicinc.com>
eUSB2 HPG revision 1.0.2 recommends to program eusb register
USB_PHY_CFG_CTRL_1 to be programmed to 0x00 on phy init.
Since this divergence is only applicable for specific version therefore
updating the override sequence with the appropriate value.
Change-Id: I132acac6eaa0f2c5a718b63a089ff995a6be17ab
Signed-off-by: Uttkarsh Aggarwal <quic_uaggarwa@quicinc.com>
