Merge "dt-bindings: regulator: Add bindings for qpnp-lcdb-regulator device"
This commit is contained in:
QCTECMDR Service
committed by
Gerrit - the friendly Code Review server
Gerrit - the friendly Code Review server
commit
d3061906dc
291
bindings/regulator/qcom,qpnp-lcdb-regulator.yaml
Normal file
291
bindings/regulator/qcom,qpnp-lcdb-regulator.yaml
Normal file
@@ -0,0 +1,291 @@
|
|||||||
|
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
||||||
|
%YAML 1.2
|
||||||
|
---
|
||||||
|
$id: http://devicetree.org/schemas/regulator/qcom,qpnp-lcdb-regulator.yaml#
|
||||||
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||||
|
|
||||||
|
title: Qualcomm Technologies, Inc. QPNP LCDB (LCD Bias) Regulator
|
||||||
|
|
||||||
|
maintainers:
|
||||||
|
- Jishnu Prakash <quic_jprakash@quicinc.com>
|
||||||
|
|
||||||
|
description: |
|
||||||
|
QPNP LCDB module provides voltage bias to the LCD display panel. The biases
|
||||||
|
are positive (VDISP - supported by LDO) and negative (VDISN - supported by
|
||||||
|
NCP) voltage signals. The module also supports TTW (touch-to-wake) capability.
|
||||||
|
|
||||||
|
properties:
|
||||||
|
compatible:
|
||||||
|
enum:
|
||||||
|
- qcom,qpnp-lcdb-regulator
|
||||||
|
- qcom,lcdb-pm660
|
||||||
|
- qcom,lcdb-pmi632
|
||||||
|
- qcom,lcdb-pm6150l
|
||||||
|
- qcom,lcdb-pm7325b
|
||||||
|
|
||||||
|
reg:
|
||||||
|
description: Base address of the LCDB SPMI peripheral.
|
||||||
|
|
||||||
|
qcom,voltage-step-ramp:
|
||||||
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||||||
|
description: Required only if the voltage needs to be set in the
|
||||||
|
steps of 500 mV starting from the 4500 mV. This needs
|
||||||
|
to be enabled only on platforms where voltage needs to
|
||||||
|
be ramped up with multiple steps.
|
||||||
|
|
||||||
|
qcom,pwrdn-delay-ms:
|
||||||
|
description: Required to control the LDO power down delay.
|
||||||
|
Possible values are 0, 1, 4, 8.
|
||||||
|
|
||||||
|
qcom,pwrup-delay-ms:
|
||||||
|
description: Required to control the LDO power up delay.
|
||||||
|
Possible values are 0, 1, 4, 8.
|
||||||
|
|
||||||
|
qcom,pwrup-config:
|
||||||
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||||||
|
description: Controls the order of powering up BOOST, LDO AND NCP
|
||||||
|
blocks. Appilcable for PM7325B. Possible values are 0, 1, 2, 3, 4.
|
||||||
|
0 - Boost, LDO, NCP
|
||||||
|
1 - Boost, LDO
|
||||||
|
2 - Boost, NCP
|
||||||
|
3 - Boost only
|
||||||
|
4 - Boost, NCP, LDO
|
||||||
|
|
||||||
|
qcom,ttw-enable:
|
||||||
|
type: boolean
|
||||||
|
description: Touch to wake-up support enabled.
|
||||||
|
|
||||||
|
qcom,ttw-mode-sw:
|
||||||
|
type: boolean
|
||||||
|
description: Touch to wake supported in SW mode.
|
||||||
|
If not defined, ttw is enabled by HW pin.
|
||||||
|
|
||||||
|
qcom,attw-toff-ms:
|
||||||
|
maxItems: 1
|
||||||
|
description: Off time (in mS) for the VDISP/VDISN signals.
|
||||||
|
Possible values are 4, 8, 16, 32.
|
||||||
|
|
||||||
|
qcom,attw-ton-ms:
|
||||||
|
maxItems: 1
|
||||||
|
description: ON time (in mS) for the VDISP/VDISN signals.
|
||||||
|
Possible values are 4, 8, 16, 32.
|
||||||
|
|
||||||
|
patternProperties:
|
||||||
|
"^lcdb_[0-9a-f]+$":
|
||||||
|
type: object
|
||||||
|
$ref: /schemas/regulator/regulator.yaml#
|
||||||
|
unevaluatedProperties: false
|
||||||
|
description: LDO and NCP bias common properties
|
||||||
|
|
||||||
|
properties:
|
||||||
|
label:
|
||||||
|
description: |
|
||||||
|
A string used to describe the bias type.
|
||||||
|
Possible values are ldo, ncp, bst.
|
||||||
|
$ref: /schemas/types.yaml#/definitions/string
|
||||||
|
|
||||||
|
regulator-name:
|
||||||
|
$ref: /schemas/types.yaml#/definitions/string
|
||||||
|
description: |
|
||||||
|
Load current in uA which corresponds to the minimum load
|
||||||
|
which requires the regulator to be in high power mode.
|
||||||
|
|
||||||
|
regulator-min-microvolt:
|
||||||
|
description: |
|
||||||
|
Minimum voltage (in uV) supported by the bias.
|
||||||
|
|
||||||
|
regulator-max-microvolt:
|
||||||
|
description: |
|
||||||
|
Maximum voltage (in uV) supported by the bias.
|
||||||
|
|
||||||
|
"^lcdb_ldo_[0-9a-f]+$":
|
||||||
|
type: object
|
||||||
|
$ref: /schemas/regulator/regulator.yaml#
|
||||||
|
unevaluatedProperties: false
|
||||||
|
description: LDO bias specific properties
|
||||||
|
|
||||||
|
properties:
|
||||||
|
qcom,ldo-voltage-mv:
|
||||||
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||||||
|
description: |
|
||||||
|
Voltage (in mV) progammed for the LDO (VDISP).
|
||||||
|
Possile values are 4000mV to 6000mV. The range
|
||||||
|
4000mV to 4900mV is in 100mV steps and 4900mV to
|
||||||
|
6000mV is in 50mV steps.
|
||||||
|
|
||||||
|
qcom,ldo-pd:
|
||||||
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||||||
|
description: |
|
||||||
|
Pull-down configuration of LDO. Possible values are
|
||||||
|
1 - Enable pull-down
|
||||||
|
0 - Disable pull-down
|
||||||
|
|
||||||
|
qcom,ldo-pd-strength:
|
||||||
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||||||
|
description: |
|
||||||
|
Pull-down strength. Possible values are
|
||||||
|
0 - Weak pull-down
|
||||||
|
1 - Strong pull-down
|
||||||
|
|
||||||
|
qcom,ldo-ilim-ma:
|
||||||
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||||||
|
description: |
|
||||||
|
Current limit (in mA) of the LDO bias. For PM7325B, possible
|
||||||
|
values are 35, 175, 280, 420, 455, 595, 700, 840. For other PMICs,
|
||||||
|
possible values are 110, 160, 210, 260, 310, 360, 410, 460.
|
||||||
|
|
||||||
|
qcom,ldo-soft-start-us:
|
||||||
|
description: |
|
||||||
|
Soft-start time (in uS) of the LDO bias.
|
||||||
|
Possible values are 0, 500, 1000, 2000.
|
||||||
|
|
||||||
|
"^lcdb_ncp_[0-9a-f]+$":
|
||||||
|
type: object
|
||||||
|
$ref: /schemas/regulator/regulator.yaml#
|
||||||
|
unevaluatedProperties: false
|
||||||
|
description: NCP bias specific properties
|
||||||
|
|
||||||
|
properties:
|
||||||
|
qcom,ncp-voltage-mv:
|
||||||
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||||||
|
description: |
|
||||||
|
Voltage (in mV) progammed for the NCP (VDISN).
|
||||||
|
Possile values are 4000mV to 6000mV. The range
|
||||||
|
4000mV to 4900mV is in 100mV steps and 4900mV to
|
||||||
|
6000mV is in 50mV steps.
|
||||||
|
|
||||||
|
qcom,ncp-pd:
|
||||||
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||||||
|
description: |
|
||||||
|
Pull-down configuration of NCP. Possible values are
|
||||||
|
1 - Enable pull-down
|
||||||
|
0 - Disable pull-down
|
||||||
|
|
||||||
|
qcom,ncp-pd-strength:
|
||||||
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||||||
|
description: |
|
||||||
|
Pull-down strength. Possible values are
|
||||||
|
0 - Weak pull-down
|
||||||
|
1 - Strong pull-down
|
||||||
|
|
||||||
|
qcom,ncp-ilim-ma:
|
||||||
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||||||
|
description: |
|
||||||
|
Current limit (in mA) of the NCP bias. For PM7325B, possible
|
||||||
|
values are 700, 80, 900, 1000. For other PMICs, possible values
|
||||||
|
are 260, 460, 640, 810.
|
||||||
|
|
||||||
|
qcom,ncp-soft-start-us:
|
||||||
|
description: |
|
||||||
|
Soft-start time (in uS) of the NCP bias.
|
||||||
|
Possible values are 0, 500, 1000, 2000.
|
||||||
|
|
||||||
|
"^lcdb_bst[0-9a-f]+$":
|
||||||
|
type: object
|
||||||
|
$ref: /schemas/regulator/regulator.yaml#
|
||||||
|
unevaluatedProperties: false
|
||||||
|
description: BOOST subnode specific properties
|
||||||
|
|
||||||
|
properties:
|
||||||
|
qcom,bst-pd:
|
||||||
|
type: boolean
|
||||||
|
description: Pull-down configuration of BOOST. Possible values are
|
||||||
|
1 - Enable pull-down
|
||||||
|
0 - Disable pull-down
|
||||||
|
|
||||||
|
qcom,bst-pd-strength:
|
||||||
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||||||
|
description: |
|
||||||
|
Pull-down strength. Possible values are
|
||||||
|
0 - Weak pull-down
|
||||||
|
1 - Strong pull-down
|
||||||
|
|
||||||
|
qcom,bst-ps:
|
||||||
|
description: |
|
||||||
|
Pulse-skip configuration for boost. Possible values are
|
||||||
|
1 - Enable Pulse-skip
|
||||||
|
0 - Disable Pulse-skip
|
||||||
|
|
||||||
|
qcom,bst-ps-threshold-ma:
|
||||||
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||||||
|
description: |
|
||||||
|
Current threshold (in mA) at which pulse-skip is entered.
|
||||||
|
Possible values are 50, 60, 70, 80.
|
||||||
|
|
||||||
|
qcom,bst-ps-threshold-mv:
|
||||||
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||||||
|
description: |
|
||||||
|
Current threshold (in mv) at which pulse-skip is entered.
|
||||||
|
Applicable for PM7325B. Possible values are 360, 384, 408, 432,
|
||||||
|
456, 480, 504, 528.
|
||||||
|
|
||||||
|
qcom,bst-ilim-ma:
|
||||||
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||||||
|
description: |
|
||||||
|
Current limit (in mA) of the BOOST rail. For PM7325B, possible
|
||||||
|
possible values are 1130 to 2250mA in 160mA steps. For other PMICs,
|
||||||
|
possible values are 200 to 1600mA in 200mA steps.
|
||||||
|
|
||||||
|
qcom,bst-headroom-mv:
|
||||||
|
$ref: /schemas/types.yaml#/definitions/uint16
|
||||||
|
description: |
|
||||||
|
Headroom of the boost (in mV). If not specified, then the
|
||||||
|
default value is 200 mV (PM660L) or 150 mV (for PM8150L or PMI632).
|
||||||
|
|
||||||
|
required:
|
||||||
|
- label
|
||||||
|
- regulator-name
|
||||||
|
- regulator-min-microvolt
|
||||||
|
- regulator-max-microvolt
|
||||||
|
|
||||||
|
required:
|
||||||
|
- compatible
|
||||||
|
- reg
|
||||||
|
- qcom,ttw-enable
|
||||||
|
|
||||||
|
additionalProperties: false
|
||||||
|
|
||||||
|
examples:
|
||||||
|
- |
|
||||||
|
|
||||||
|
pm660l_lcdb: qpnp-lcdb@ec00 {
|
||||||
|
compatible = "qcom,qpnp-lcdb-regulator";
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
reg = <0xec00 0x100>;
|
||||||
|
|
||||||
|
qcom,ttw-enable;
|
||||||
|
|
||||||
|
lcdb_ldo_vreg: ldo {
|
||||||
|
label = "ldo";
|
||||||
|
regulator-name = "lcdb_ldo";
|
||||||
|
regulator-min-microvolt = <4000000>;
|
||||||
|
regulator-max-microvolt = <6000000>;
|
||||||
|
|
||||||
|
qcom,ldo-voltage-mv = <5400>;
|
||||||
|
qcom,ldo-pd = <1>;
|
||||||
|
qcom,ldo-pd-strength = <1>;
|
||||||
|
};
|
||||||
|
|
||||||
|
lcdb_ncp_vreg: ncp {
|
||||||
|
label = "ncp";
|
||||||
|
regulator-name = "lcdb_ncp";
|
||||||
|
regulator-min-microvolt = <4000000>;
|
||||||
|
regulator-max-microvolt = <6000000>;
|
||||||
|
|
||||||
|
qcom,ncp-voltage-mv = <5400>;
|
||||||
|
qcom,ncp-pd = <1>;
|
||||||
|
qcom,ncp-pd-strength = <1>;
|
||||||
|
};
|
||||||
|
|
||||||
|
lcdb_bst: bst {
|
||||||
|
label = "bst";
|
||||||
|
|
||||||
|
qcom,bst-pd = <1>;
|
||||||
|
qcom,bst-pd-strength = <1>;
|
||||||
|
qcom,bst-ps = <1>;
|
||||||
|
qcom,bst-ps-threshold-ma = <50>;
|
||||||
|
qcom,bst-headroom-mv = <200>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
Reference in New Issue
Block a user