ARM: dts: msm: add PMIC support for sdxkova
sdxkova uses PMK8550, PM7550BA and PMX75. Add SPMI slave device and some of the peripheral devices for PMX75. Update PMIC overlay file to add devices from these PMICs that are common for all sdxkova platforms. Also add PM7550BA-related configurations required for the IDP MBB platform. Add spmi_debug_bus so that PMIC peripherals can be accessed via debug bus on sdxkova devices where the fuse is not blown. This is useful for debugging. Add PMIC Glink devices and their client devices. The PMIC Glink device with name PMIC_RTR_ADSP_APPS supports the clients: ucsi, altmode, and battery_charger. The PMIC Glink device with name PMIC_LOGS_ADSP_APPS supports the clients: battery_debug, pmic_glink_debug, charger_ulog_glink, and glink_adc. Change-Id: I6dc40cc36a46c1b34edd274655306dadd3143ebf Signed-off-by: Jishnu Prakash <quic_jprakash@quicinc.com>
This commit is contained in:
Jishnu Prakash
87
qcom/pmx75.dtsi
Normal file
87
qcom/pmx75.dtsi
Normal file
@@ -0,0 +1,87 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/spmi/spmi.h>
|
||||
|
||||
&spmi_bus {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <0>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <4>;
|
||||
|
||||
qcom,pmx75@1 {
|
||||
compatible = "qcom,spmi-pmic";
|
||||
reg = <1 SPMI_USID>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
pmx75_tz: qcom,temp-alarm@a00 {
|
||||
compatible = "qcom,spmi-temp-alarm";
|
||||
reg = <0xa00>;
|
||||
interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
|
||||
#thermal-sensor-cells = <0>;
|
||||
};
|
||||
|
||||
pmx75_vbus_detect: qcom,pmd-vbus-det@1500 {
|
||||
compatible = "qcom,pm8941-misc";
|
||||
reg = <0x1500>;
|
||||
interrupts = <0x1 0x15 0x0 IRQ_TYPE_EDGE_BOTH>;
|
||||
interrupt-names = "usb_vbus";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pmx75_gpios: pinctrl@8800 {
|
||||
compatible = "qcom,pmx75-gpio";
|
||||
reg = <0x8800>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
pmx75_pwm: pwms@e800 {
|
||||
compatible = "qcom,pwm-lpg";
|
||||
reg = <0xe800>;
|
||||
reg-names = "lpg-base";
|
||||
#pwm-cells = <2>;
|
||||
qcom,num-lpg-channels = <4>;
|
||||
};
|
||||
|
||||
pmx75_eusb2_repeater: qcom,eusb2-repeater@fd00 {
|
||||
compatible = "qcom,pmic-eusb2-repeater";
|
||||
reg = <0xfd00>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&thermal_zones {
|
||||
pmx75_temp_alarm: pmx75_tz {
|
||||
polling-delay-passive = <100>;
|
||||
polling-delay = <0>;
|
||||
thermal-sensors = <&pmx75_tz>;
|
||||
|
||||
trips {
|
||||
pmx75_trip0: trip0 {
|
||||
temperature = <95000>;
|
||||
hysteresis = <0>;
|
||||
type = "passive";
|
||||
};
|
||||
|
||||
pmx75_trip1: trip1 {
|
||||
temperature = <115000>;
|
||||
hysteresis = <0>;
|
||||
type = "critical";
|
||||
};
|
||||
|
||||
pmx75_trip2: trip2 {
|
||||
temperature = <145000>;
|
||||
hysteresis = <0>;
|
||||
type = "critical";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
@@ -46,3 +46,8 @@
|
||||
|
||||
operating-points-v2 = <&sdhc1_opp_table>;
|
||||
};
|
||||
|
||||
&pmx75_vbus_detect {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
|
||||
@@ -3,8 +3,9 @@
|
||||
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
#include "sdxkova-pmic-overlay.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include "sdxkova-pmic-overlay.dtsi"
|
||||
#include "pm7550ba.dtsi"
|
||||
|
||||
&sdhc_1 {
|
||||
status = "disabled";
|
||||
@@ -28,3 +29,39 @@
|
||||
|
||||
operating-points-v2 = <&sdhc2_opp_table>;
|
||||
};
|
||||
|
||||
&pmk8550_vadc {
|
||||
/* PM8550BA Channel nodes */
|
||||
pm7550ba_offset_ref {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
pm7550ba_vref_1p25 {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
pm7550ba_die_temp {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
pm7550ba_vph_pwr {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
pm7550ba_chg_temp {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
pm7550ba_iin_fb {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
pm7550ba_ichg_fb {
|
||||
status = "ok";
|
||||
};
|
||||
};
|
||||
|
||||
&pm7550ba_tz {
|
||||
io-channels = <&pmk8550_vadc PM7550BA_ADC5_GEN3_DIE_TEMP>;
|
||||
io-channel-names = "thermal";
|
||||
};
|
||||
|
||||
@@ -4,6 +4,11 @@
|
||||
*/
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/iio/qcom,spmi-adc5-gen3-pm7550ba.h>
|
||||
#include <dt-bindings/iio/qcom,spmi-adc5-gen3-pmx75.h>
|
||||
|
||||
#include "pmk8550.dtsi"
|
||||
#include "pmx75.dtsi"
|
||||
|
||||
/ {
|
||||
vreg_sdc1_sd_ls_vccb: sdc1-sd-ls-gpio-regulator {
|
||||
@@ -27,3 +32,365 @@
|
||||
parent-supply = <&vreg_sdc1_sd_ls_vccb>;
|
||||
};
|
||||
};
|
||||
|
||||
&spmi_bus {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <0>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <4>;
|
||||
|
||||
qcom,pmg1110@a {
|
||||
compatible = "qcom,spmi-pmic";
|
||||
reg = <10 SPMI_USID>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
pmg1110_tz: qcom,temp-alarm@a00 {
|
||||
compatible = "qcom,spmi-temp-alarm";
|
||||
reg = <0xa00>;
|
||||
interrupts = <0xa 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
|
||||
#thermal-sensor-cells = <0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&thermal_zones {
|
||||
pmg1110_temp_alarm: pmg1110_tz {
|
||||
polling-delay-passive = <100>;
|
||||
polling-delay = <0>;
|
||||
thermal-sensors = <&pmg1110_tz>;
|
||||
|
||||
trips {
|
||||
trip0 {
|
||||
temperature = <95000>;
|
||||
hysteresis = <0>;
|
||||
type = "passive";
|
||||
};
|
||||
|
||||
trip1 {
|
||||
temperature = <115000>;
|
||||
hysteresis = <0>;
|
||||
type = "critical";
|
||||
};
|
||||
|
||||
trip2 {
|
||||
temperature = <145000>;
|
||||
hysteresis = <0>;
|
||||
type = "critical";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pmk8550_vadc {
|
||||
/delete-node/ pm8550_offset_ref;
|
||||
/delete-node/ pm8550_vref_1p25;
|
||||
/delete-node/ pm8550_die_temp;
|
||||
/delete-node/ pm8550_vph_pwr;
|
||||
|
||||
/* PM8550BA Channel nodes */
|
||||
pm7550ba_offset_ref {
|
||||
reg = <PM7550BA_ADC5_GEN3_OFFSET_REF>;
|
||||
label = "pm7550ba_offset_ref";
|
||||
qcom,pre-scaling = <1 1>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pm7550ba_vref_1p25 {
|
||||
reg = <PM7550BA_ADC5_GEN3_1P25VREF>;
|
||||
label = "pm7550ba_vref_1p25";
|
||||
qcom,pre-scaling = <1 1>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pm7550ba_die_temp {
|
||||
reg = <PM7550BA_ADC5_GEN3_DIE_TEMP>;
|
||||
label = "pm7550ba_die_temp";
|
||||
qcom,pre-scaling = <1 1>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pm7550ba_vph_pwr {
|
||||
reg = <PM7550BA_ADC5_GEN3_VPH_PWR>;
|
||||
label = "pm7550ba_vph_pwr";
|
||||
qcom,pre-scaling = <1 3>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pm7550ba_chg_temp {
|
||||
reg = <PM7550BA_ADC5_GEN3_CHG_TEMP_V>;
|
||||
label = "pm7550ba_chg_temp";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pm7550ba_iin_fb {
|
||||
reg = <PM7550BA_ADC5_GEN3_IIN_FB>;
|
||||
label = "pm7550ba_iin_fb";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pm7550ba_ichg_fb {
|
||||
reg = <PM7550BA_ADC5_GEN3_ICHG_FB>;
|
||||
label = "pm7550ba_ichg_fb";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
/* PMX75 Channel nodes */
|
||||
pmx75_offset_ref {
|
||||
reg = <PMX75_ADC5_GEN3_OFFSET_REF>;
|
||||
label = "pmx75_offset_ref";
|
||||
qcom,pre-scaling = <1 1>;
|
||||
};
|
||||
|
||||
pmx75_vref_1p25 {
|
||||
reg = <PMX75_ADC5_GEN3_1P25VREF>;
|
||||
label = "pmx75_vref_1p25";
|
||||
qcom,pre-scaling = <1 1>;
|
||||
};
|
||||
|
||||
pmx75_die_temp {
|
||||
reg = <PMX75_ADC5_GEN3_DIE_TEMP>;
|
||||
label = "pmx75_die_temp";
|
||||
qcom,pre-scaling = <1 1>;
|
||||
};
|
||||
|
||||
pmx75_vph_pwr {
|
||||
reg = <PMX75_ADC5_GEN3_VPH_PWR>;
|
||||
label = "pmx75_vph_pwr";
|
||||
qcom,pre-scaling = <1 3>;
|
||||
};
|
||||
|
||||
pmx75_pa_therm1 {
|
||||
reg = <PMX75_ADC5_GEN3_AMUX_THM1_100K_PU>;
|
||||
label = "pmx75_pa_therm1";
|
||||
qcom,ratiometric;
|
||||
qcom,hw-settle-time = <200>;
|
||||
qcom,pre-scaling = <1 1>;
|
||||
qcom,adc-tm-type = <1>;
|
||||
};
|
||||
|
||||
pmx75_pa_therm2 {
|
||||
reg = <PMX75_ADC5_GEN3_AMUX_THM2_100K_PU>;
|
||||
label = "pmx75_pa_therm2";
|
||||
qcom,ratiometric;
|
||||
qcom,hw-settle-time = <200>;
|
||||
qcom,pre-scaling = <1 1>;
|
||||
qcom,adc-tm-type = <1>;
|
||||
};
|
||||
|
||||
pmx75_sdx_case_therm {
|
||||
reg = <PMX75_ADC5_GEN3_AMUX_THM3_100K_PU>;
|
||||
label = "pmx75_sdx_case_therm";
|
||||
qcom,ratiometric;
|
||||
qcom,hw-settle-time = <200>;
|
||||
qcom,pre-scaling = <1 1>;
|
||||
qcom,adc-tm-type = <1>;
|
||||
};
|
||||
|
||||
pmx75_ambient_therm {
|
||||
reg = <PMX75_ADC5_GEN3_AMUX_THM4_100K_PU>;
|
||||
label = "pmx75_ambient_therm";
|
||||
qcom,ratiometric;
|
||||
qcom,hw-settle-time = <200>;
|
||||
qcom,pre-scaling = <1 1>;
|
||||
qcom,adc-tm-type = <1>;
|
||||
};
|
||||
|
||||
pmx75_qtm_therm {
|
||||
reg = <PMX75_ADC5_GEN3_AMUX_THM5_100K_PU>;
|
||||
label = "pmx75_qtm_therm";
|
||||
qcom,ratiometric;
|
||||
qcom,hw-settle-time = <200>;
|
||||
qcom,pre-scaling = <1 1>;
|
||||
qcom,adc-tm-type = <1>;
|
||||
};
|
||||
|
||||
pmx75_sdr_skin_therm {
|
||||
reg = <PMX75_ADC5_GEN3_AMUX_THM6_100K_PU>;
|
||||
label = "pmx75_sdr_skin_therm";
|
||||
qcom,ratiometric;
|
||||
qcom,hw-settle-time = <200>;
|
||||
qcom,pre-scaling = <1 1>;
|
||||
qcom,adc-tm-type = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&pmx75_tz {
|
||||
io-channels = <&pmk8550_vadc PMX75_ADC5_GEN3_DIE_TEMP>;
|
||||
io-channel-names = "thermal";
|
||||
};
|
||||
|
||||
&thermal_zones {
|
||||
sys-therm-1 {
|
||||
polling-delay-passive = <0>;
|
||||
polling-delay = <0>;
|
||||
thermal-sensors = <&pmk8550_vadc PMX75_ADC5_GEN3_AMUX_THM1_100K_PU>;
|
||||
trips {
|
||||
active-config0 {
|
||||
temperature = <125000>;
|
||||
hysteresis = <1000>;
|
||||
type = "passive";
|
||||
};
|
||||
|
||||
active-config1 {
|
||||
temperature = <125000>;
|
||||
hysteresis = <1000>;
|
||||
type = "passive";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
sys-therm-2 {
|
||||
polling-delay-passive = <0>;
|
||||
polling-delay = <0>;
|
||||
thermal-sensors = <&pmk8550_vadc PMX75_ADC5_GEN3_AMUX_THM2_100K_PU>;
|
||||
trips {
|
||||
active-config0 {
|
||||
temperature = <125000>;
|
||||
hysteresis = <1000>;
|
||||
type = "passive";
|
||||
};
|
||||
|
||||
active-config1 {
|
||||
temperature = <125000>;
|
||||
hysteresis = <1000>;
|
||||
type = "passive";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
sys-therm-3 {
|
||||
polling-delay-passive = <0>;
|
||||
polling-delay = <0>;
|
||||
thermal-sensors = <&pmk8550_vadc PMX75_ADC5_GEN3_AMUX_THM3_100K_PU>;
|
||||
trips {
|
||||
active-config0 {
|
||||
temperature = <125000>;
|
||||
hysteresis = <1000>;
|
||||
type = "passive";
|
||||
};
|
||||
|
||||
active-config1 {
|
||||
temperature = <125000>;
|
||||
hysteresis = <1000>;
|
||||
type = "passive";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
sys-therm-4 {
|
||||
polling-delay-passive = <0>;
|
||||
polling-delay = <0>;
|
||||
thermal-sensors = <&pmk8550_vadc PMX75_ADC5_GEN3_AMUX_THM4_100K_PU>;
|
||||
trips {
|
||||
active-config0 {
|
||||
temperature = <125000>;
|
||||
hysteresis = <1000>;
|
||||
type = "passive";
|
||||
};
|
||||
|
||||
active-config1 {
|
||||
temperature = <125000>;
|
||||
hysteresis = <1000>;
|
||||
type = "passive";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
sys-therm-5 {
|
||||
polling-delay-passive = <0>;
|
||||
polling-delay = <0>;
|
||||
thermal-sensors = <&pmk8550_vadc PMX75_ADC5_GEN3_AMUX_THM5_100K_PU>;
|
||||
trips {
|
||||
active-config0 {
|
||||
temperature = <125000>;
|
||||
hysteresis = <1000>;
|
||||
type = "passive";
|
||||
};
|
||||
|
||||
active-config1 {
|
||||
temperature = <125000>;
|
||||
hysteresis = <1000>;
|
||||
type = "passive";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
sys-therm-6 {
|
||||
polling-delay-passive = <0>;
|
||||
polling-delay = <0>;
|
||||
thermal-sensors = <&pmk8550_vadc PMX75_ADC5_GEN3_AMUX_THM6_100K_PU>;
|
||||
trips {
|
||||
active-config0 {
|
||||
temperature = <125000>;
|
||||
hysteresis = <1000>;
|
||||
type = "passive";
|
||||
};
|
||||
|
||||
active-config1 {
|
||||
temperature = <125000>;
|
||||
hysteresis = <1000>;
|
||||
type = "passive";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
xo-therm {
|
||||
polling-delay-passive = <0>;
|
||||
polling-delay = <0>;
|
||||
thermal-sensors = <&pmk8550_vadc PMK8550_ADC5_GEN3_AMUX_THM1_XO_THERM_100K_PU>;
|
||||
trips {
|
||||
active-config0 {
|
||||
temperature = <125000>;
|
||||
hysteresis = <1000>;
|
||||
type = "passive";
|
||||
};
|
||||
|
||||
active-config1 {
|
||||
temperature = <125000>;
|
||||
hysteresis = <1000>;
|
||||
type = "passive";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
pmg1110_temp_alarm: pmg1110_tz {
|
||||
polling-delay-passive = <100>;
|
||||
polling-delay = <0>;
|
||||
thermal-sensors = <&pmg1110_tz>;
|
||||
|
||||
trips {
|
||||
trip0 {
|
||||
temperature = <95000>;
|
||||
hysteresis = <0>;
|
||||
type = "passive";
|
||||
};
|
||||
|
||||
trip1 {
|
||||
temperature = <115000>;
|
||||
hysteresis = <0>;
|
||||
type = "critical";
|
||||
};
|
||||
|
||||
trip2 {
|
||||
temperature = <145000>;
|
||||
hysteresis = <0>;
|
||||
type = "critical";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&soc {
|
||||
pmic-pon-log {
|
||||
compatible = "qcom,pmic-pon-log";
|
||||
nvmem = <&pmk8550_sdam_5>, <&pmk8550_sdam_6>;
|
||||
nvmem-names = "pon_log0", "pon_log1";
|
||||
};
|
||||
|
||||
reboot_reason {
|
||||
compatible = "qcom,reboot-reason";
|
||||
nvmem-cells = <&restart_reason>;
|
||||
nvmem-cell-names = "restart_reason";
|
||||
};
|
||||
};
|
||||
|
||||
@@ -4,6 +4,7 @@
|
||||
*/
|
||||
|
||||
#include <dt-bindings/soc/qcom,ipcc.h>
|
||||
#include <dt-bindings/spmi/spmi.h>
|
||||
#include "sdx75.dtsi"
|
||||
/delete-node/ &apps_smmu;
|
||||
/delete-node/ &tcsr_mutex;
|
||||
@@ -1539,6 +1540,115 @@
|
||||
iommu-addresses = <&qupv3_id_0 0x0 0x40000000>,
|
||||
<&qupv3_id_0 0x50000000 0xb0000000>;
|
||||
};
|
||||
|
||||
/delete-node/ spmi@c400000;
|
||||
spmi_bus: qcom,spmi@c42d000 {
|
||||
compatible = "qcom,spmi-pmic-arb";
|
||||
reg = <0x0 0xc42d000 0x0 0x4000>,
|
||||
<0x0 0xc400000 0x0 0x2800>,
|
||||
<0x0 0xc500000 0x0 0x200000>,
|
||||
<0x0 0xc440000 0x0 0x3c000>,
|
||||
<0x0 0xc4c0000 0x0 0x10000>;
|
||||
reg-names = "cnfg", "core", "chnls", "obsrvr", "intr";
|
||||
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "periph_irq";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <4>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <0>;
|
||||
cell-index = <0>;
|
||||
qcom,channel = <0>;
|
||||
qcom,ee = <0>;
|
||||
qcom,bus-id = <0>;
|
||||
};
|
||||
|
||||
spmi_debug_bus: qcom,spmi-debug@24b14000 {
|
||||
compatible = "qcom,spmi-pmic-arb-debug";
|
||||
reg = <0x0 0x24b14000 0x0 0x60>, <0x0 0x221c8784 0x0 0x4>;
|
||||
reg-names = "core", "fuse";
|
||||
clock-names = "core_clk";
|
||||
qcom,fuse-enable-bit = <18>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <0>;
|
||||
depends-on-supply = <&spmi_bus>;
|
||||
|
||||
qcom,pmk8550-debug@0 {
|
||||
compatible = "qcom,spmi-pmic";
|
||||
reg = <0 SPMI_USID>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <0>;
|
||||
qcom,can-sleep;
|
||||
};
|
||||
|
||||
qcom,pmx75-debug@1 {
|
||||
compatible = "qcom,spmi-pmic";
|
||||
reg = <1 SPMI_USID>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <0>;
|
||||
qcom,can-sleep;
|
||||
};
|
||||
|
||||
qcom,pm7550ba-debug@7 {
|
||||
compatible = "qcom,spmi-pmic";
|
||||
reg = <7 SPMI_USID>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <0>;
|
||||
qcom,can-sleep;
|
||||
};
|
||||
};
|
||||
|
||||
thermal_zones: thermal-zones {
|
||||
};
|
||||
|
||||
pmic_glink: qcom,pmic_glink {
|
||||
compatible = "qcom,pmic-glink";
|
||||
qcom,pmic-glink-channel = "PMIC_RTR_ADSP_APPS";
|
||||
qcom,subsys-name = "mpss";
|
||||
status = "disabled";
|
||||
|
||||
ucsi: qcom,ucsi {
|
||||
compatible = "qcom,ucsi-glink";
|
||||
};
|
||||
|
||||
qcom,battery_charger {
|
||||
compatible = "qcom,battery-charger";
|
||||
qcom,wireless-charging-not-supported;
|
||||
qcom,thermal-mitigation-step = <500000>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic_glink_log: qcom,pmic_glink_log {
|
||||
compatible = "qcom,pmic-glink";
|
||||
qcom,pmic-glink-channel = "PMIC_LOGS_ADSP_APPS";
|
||||
status = "disabled";
|
||||
|
||||
qcom,battery_debug {
|
||||
compatible = "qcom,battery-debug";
|
||||
};
|
||||
|
||||
qcom,charger_ulog_glink {
|
||||
compatible = "qcom,charger-ulog-glink";
|
||||
};
|
||||
|
||||
pmic_glink_debug: qcom,pmic_glink_debug {
|
||||
compatible = "qcom,pmic-glink-debug";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
depends-on-supply = <&spmi_bus>;
|
||||
|
||||
spmi@0 {
|
||||
reg = <0>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <0>;
|
||||
|
||||
qcom,pm7550ba-debug@7 {
|
||||
compatible = "qcom,spmi-pmic";
|
||||
reg = <7 SPMI_USID>;
|
||||
qcom,can-sleep;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gcc {
|
||||
|
||||
Reference in New Issue
Block a user