Merge "ARM: dts: msm: Add pmiv0108 support for tuna"
This commit is contained in:
committed by
Gerrit - the friendly Code Review server
commit
b5e978fa63
129
qcom/pmiv010x.dtsi
Normal file
129
qcom/pmiv010x.dtsi
Normal file
@@ -0,0 +1,129 @@
|
|||||||
|
// SPDX-License-Identifier: BSD-3-Clause
|
||||||
|
/*
|
||||||
|
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <dt-bindings/spmi/spmi.h>
|
||||||
|
#include <dt-bindings/interrupt-controller/irq.h>
|
||||||
|
#include <dt-bindings/iio/qcom,spmi-vadc.h>
|
||||||
|
|
||||||
|
&spmi_bus {
|
||||||
|
#address-cells = <2>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
interrupt-controller;
|
||||||
|
#interrupt-cells = <4>;
|
||||||
|
|
||||||
|
pmiv010x_7: qcom,pmiv0108@7 {
|
||||||
|
compatible = "qcom,spmi-pmic";
|
||||||
|
reg = <7 SPMI_USID>;
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
|
||||||
|
pmiv010x_tz: qcom,temp-alarm@a00 {
|
||||||
|
compatible = "qcom,spmi-temp-alarm";
|
||||||
|
reg = <0xa00>;
|
||||||
|
interrupts = <0x7 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
|
||||||
|
#thermal-sensor-cells = <0>;
|
||||||
|
};
|
||||||
|
|
||||||
|
pmiv010x_gpios: pinctrl@8800 {
|
||||||
|
compatible = "qcom,pmiv0108-gpio";
|
||||||
|
reg = <0x8800>;
|
||||||
|
gpio-controller;
|
||||||
|
#gpio-cells = <2>;
|
||||||
|
interrupt-controller;
|
||||||
|
#interrupt-cells = <2>;
|
||||||
|
};
|
||||||
|
|
||||||
|
pmiv010x_eusb2_repeater: eusb2-repeater@fd00 {
|
||||||
|
compatible = "qcom,pmic-eusb2-repeater";
|
||||||
|
reg = <0xfd00>;
|
||||||
|
};
|
||||||
|
|
||||||
|
pmiv010x_vib: qcom,vibrator@df00 {
|
||||||
|
compatible = "qcom,qpnp-vibrator-ldo";
|
||||||
|
reg = <0xdf00>;
|
||||||
|
qcom,vib-ldo-volt-uv = <3000000>;
|
||||||
|
qcom,disable-overdrive;
|
||||||
|
};
|
||||||
|
|
||||||
|
pmiv010x_amoled: qcom,amoled {
|
||||||
|
compatible = "qcom,amoled-regulator";
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
status = "disabled";
|
||||||
|
|
||||||
|
oledb_vreg: oledb@fa00 {
|
||||||
|
reg = <0xfa00>;
|
||||||
|
reg-names = "oledb_base";
|
||||||
|
regulator-name = "oledb";
|
||||||
|
regulator-min-microvolt = <5000000>;
|
||||||
|
regulator-max-microvolt = <8000000>;
|
||||||
|
qcom,swire-control;
|
||||||
|
};
|
||||||
|
|
||||||
|
ab_vreg: ab@f900 {
|
||||||
|
reg = <0xf900>;
|
||||||
|
reg-names = "ab_base";
|
||||||
|
regulator-name = "ab";
|
||||||
|
regulator-min-microvolt = <4600000>;
|
||||||
|
regulator-max-microvolt = <5200000>;
|
||||||
|
qcom,swire-control;
|
||||||
|
};
|
||||||
|
|
||||||
|
ibb_vreg: ibb@f800 {
|
||||||
|
reg = <0xf800>;
|
||||||
|
reg-names = "ibb_base";
|
||||||
|
regulator-name = "ibb";
|
||||||
|
regulator-min-microvolt = <1400000>;
|
||||||
|
regulator-max-microvolt = <6600000>;
|
||||||
|
qcom,swire-control;
|
||||||
|
regulator-allow-set-load;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
pmiv010x_amoled_ecm: qcom,amoled-ecm@f900 {
|
||||||
|
compatible = "qcom,amoled-ecm";
|
||||||
|
reg = <0xf900>;
|
||||||
|
status = "disabled";
|
||||||
|
|
||||||
|
nvmem-names = "amoled-ecm-sdam0", "amoled-ecm-sdam1",
|
||||||
|
"amoled-ecm-sdam2";
|
||||||
|
nvmem = <&pmk8550_sdam_13>, <&pmk8550_sdam_14>,
|
||||||
|
<&pmk8550_sdam_41>;
|
||||||
|
interrupt-names = "ecm-sdam0", "ecm-sdam1",
|
||||||
|
"ecm-sdam2";
|
||||||
|
interrupts = <0x7 0x7c 0x1 IRQ_TYPE_EDGE_RISING>,
|
||||||
|
<0x7 0x7d 0x1 IRQ_TYPE_EDGE_RISING>,
|
||||||
|
<0x7 0x98 0x1 IRQ_TYPE_EDGE_RISING>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&thermal_zones {
|
||||||
|
pmiv010x_temp_alarm: pmiv010x_tz {
|
||||||
|
polling-delay-passive = <100>;
|
||||||
|
polling-delay = <0>;
|
||||||
|
thermal-governor = "step_wise";
|
||||||
|
thermal-sensors = <&pmiv010x_tz>;
|
||||||
|
trips {
|
||||||
|
pmiv010x_trip0: trip0 {
|
||||||
|
temperature = <95000>;
|
||||||
|
hysteresis = <0>;
|
||||||
|
type = "passive";
|
||||||
|
};
|
||||||
|
|
||||||
|
pmiv010x_trip1: trip1 {
|
||||||
|
temperature = <115000>;
|
||||||
|
hysteresis = <0>;
|
||||||
|
type = "passive";
|
||||||
|
};
|
||||||
|
|
||||||
|
pmiv010x_trip2: trip2 {
|
||||||
|
temperature = <145000>;
|
||||||
|
hysteresis = <0>;
|
||||||
|
type = "critical";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
@@ -7,6 +7,7 @@
|
|||||||
/plugin/;
|
/plugin/;
|
||||||
|
|
||||||
#include "tuna-cdp.dtsi"
|
#include "tuna-cdp.dtsi"
|
||||||
|
#include "tuna-pmiv0108.dtsi"
|
||||||
|
|
||||||
/ {
|
/ {
|
||||||
model = "Qualcomm Technologies, Inc. Tuna CDP";
|
model = "Qualcomm Technologies, Inc. Tuna CDP";
|
||||||
|
186
qcom/tuna-pmiv0108.dtsi
Normal file
186
qcom/tuna-pmiv0108.dtsi
Normal file
@@ -0,0 +1,186 @@
|
|||||||
|
// SPDX-License-Identifier: BSD-3-Clause
|
||||||
|
/*
|
||||||
|
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <dt-bindings/iio/qcom,spmi-vadc.h>
|
||||||
|
#include <dt-bindings/iio/qcom,spmi-adc5-gen3-pmiv0104.h>
|
||||||
|
#include "pmiv010x.dtsi"
|
||||||
|
|
||||||
|
&pmiv010x_gpios {
|
||||||
|
charger_skin_therm {
|
||||||
|
charger_skin_therm_default: charger_skin_therm_default {
|
||||||
|
pins = "gpio6";
|
||||||
|
bias-high-impedence;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&pmiv010x_amoled {
|
||||||
|
status= "disabled";
|
||||||
|
};
|
||||||
|
|
||||||
|
&pmiv010x_amoled_ecm {
|
||||||
|
status = "disabled";
|
||||||
|
};
|
||||||
|
|
||||||
|
&pmiv010x_tz {
|
||||||
|
io-channels = <&pmk8550_vadc PMIV0104_ADC5_GEN3_DIE_TEMP>;
|
||||||
|
io-channel-names = "thermal";
|
||||||
|
|
||||||
|
};
|
||||||
|
|
||||||
|
&battery_charger {
|
||||||
|
#cooling-cells = <2>;
|
||||||
|
qcom,thermal-mitigation-step = <500000>;
|
||||||
|
};
|
||||||
|
|
||||||
|
&pmk8550_vadc {
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&charger_skin_therm_default &sys_therm_6_gpio7_default>;
|
||||||
|
|
||||||
|
pmiv010x_ref_gnd {
|
||||||
|
reg = <PMIV0104_ADC5_GEN3_OFFSET_REF>;
|
||||||
|
label = "pmiv010x_ref_gnd";
|
||||||
|
qcom,pre-scaling = <1 1>;
|
||||||
|
};
|
||||||
|
|
||||||
|
pmiv010x_vref_1p25 {
|
||||||
|
reg = <PMIV0104_ADC5_GEN3_1P25VREF>;
|
||||||
|
label = "pmiv010x_vref_1p25";
|
||||||
|
qcom,pre-scaling = <1 1>;
|
||||||
|
};
|
||||||
|
|
||||||
|
pmiv010x_die_temp {
|
||||||
|
reg = <PMIV0104_ADC5_GEN3_DIE_TEMP>;
|
||||||
|
label = "pmiv010x_die_temp";
|
||||||
|
qcom,pre-scaling = <1 1>;
|
||||||
|
};
|
||||||
|
|
||||||
|
pmiv010x_vph_pwr {
|
||||||
|
reg = <PMIV0104_ADC5_GEN3_VPH_PWR>;
|
||||||
|
label = "pmiv010x_vph_pwr";
|
||||||
|
qcom,pre-scaling = <1 3>;
|
||||||
|
};
|
||||||
|
|
||||||
|
pmiv010x_vbat_sns_qbg {
|
||||||
|
reg = <PMIV0104_ADC5_GEN3_VBAT_SNS_QBG>;
|
||||||
|
label = "pmiv010x_vbat_sns";
|
||||||
|
qcom,pre-scaling = <1 3>;
|
||||||
|
};
|
||||||
|
|
||||||
|
pmiv010x_chg_temp {
|
||||||
|
reg = <PMIV0104_ADC5_GEN3_CHG_TEMP>;
|
||||||
|
label = "pmiv010x_chg_temp";
|
||||||
|
qcom,pre-scaling = <1 1>;
|
||||||
|
};
|
||||||
|
|
||||||
|
pmiv010x_bat_therm {
|
||||||
|
reg = <PMIV0104_ADC5_GEN3_AMUX_THM1_BATT_THERM_100K_PU>;
|
||||||
|
label = "pmiv010x_bat_therm";
|
||||||
|
qcom,ratiometric;
|
||||||
|
qcom,hw-settle-time = <200>;
|
||||||
|
qcom,pre-scaling = <1 1>;
|
||||||
|
qcom,scale-fn-type = <ADC_SCALE_HW_CALIB_PM5_GEN3_BATT_THERM_100K>;
|
||||||
|
};
|
||||||
|
|
||||||
|
pmiv010x_bat_id {
|
||||||
|
reg = <PMIV0104_ADC5_GEN3_AMUX_THM2_BATT_ID_100K_PU>;
|
||||||
|
label = "pmiv010x_bat_id";
|
||||||
|
qcom,ratiometric;
|
||||||
|
qcom,hw-settle-time = <200>;
|
||||||
|
qcom,pre-scaling = <1 1>;
|
||||||
|
qcom,scale-fn-type = <ADC_SCALE_HW_CALIB_PM5_GEN3_BATT_ID_100K>;
|
||||||
|
};
|
||||||
|
|
||||||
|
pmiv010x_iin_fb {
|
||||||
|
reg = <PMIV0104_ADC5_GEN3_IIN_FB>;
|
||||||
|
label = "pmiv010x_iin_fb";
|
||||||
|
};
|
||||||
|
|
||||||
|
pmiv010x_ichg_fb {
|
||||||
|
reg = <PMIV0104_ADC5_GEN3_ICHG_FB>;
|
||||||
|
label = "pmiv010x_ichg_fb";
|
||||||
|
};
|
||||||
|
|
||||||
|
pmiv010x_sys_therm_7 {
|
||||||
|
reg = <PMIV0104_ADC5_GEN3_AMUX_THM6_GPIO6_100K_PU>;
|
||||||
|
label = "pmiv010x_charger_skin_therm";
|
||||||
|
qcom,ratiometric;
|
||||||
|
qcom,hw-settle-time = <200>;
|
||||||
|
qcom,pre-scaling = <1 1>;
|
||||||
|
qcom,adc-tm-type = <1>;
|
||||||
|
};
|
||||||
|
|
||||||
|
pmiv010x_sys_therm_8 {
|
||||||
|
reg = <PMIV0104_ADC5_GEN3_AMUX_THM4_USB_THERM_100K_PU>;
|
||||||
|
label = "pmiv010x_conn_therm";
|
||||||
|
qcom,ratiometric;
|
||||||
|
qcom,hw-settle-time = <200>;
|
||||||
|
qcom,pre-scaling = <1 1>;
|
||||||
|
qcom,adc-tm-type = <1>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&pmic_glink_debug {
|
||||||
|
spmi@0 {
|
||||||
|
reg = <0>;
|
||||||
|
#address-cells = <2>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
qcom,pmiv010x-debug@7 {
|
||||||
|
compatible = "qcom,spmi-pmic";
|
||||||
|
reg = <7 SPMI_USID>;
|
||||||
|
qcom,can-sleep;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&spmi0_debug_bus {
|
||||||
|
qcom,pmiv010x-debug@7 {
|
||||||
|
compatible = "qcom,spmi-pmic";
|
||||||
|
reg = <7 SPMI_USID>;
|
||||||
|
#address-cells = <2>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
qcom,can-sleep;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&thermal_zones {
|
||||||
|
sys-therm-7 {
|
||||||
|
polling-delay-passive = <0>;
|
||||||
|
polling-delay = <0>;
|
||||||
|
thermal-sensors = <&pmk8550_vadc PMIV0104_ADC5_GEN3_AMUX_THM6_GPIO6_100K_PU>;
|
||||||
|
trips {
|
||||||
|
active-config0 {
|
||||||
|
temperature = <125000>;
|
||||||
|
hysteresis = <1000>;
|
||||||
|
type = "passive";
|
||||||
|
};
|
||||||
|
|
||||||
|
active-config1 {
|
||||||
|
temperature = <125000>;
|
||||||
|
hysteresis = <1000>;
|
||||||
|
type = "passive";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
sys-therm-8 {
|
||||||
|
polling-delay-passive = <0>;
|
||||||
|
polling-delay = <0>;
|
||||||
|
thermal-sensors = <&pmk8550_vadc PMIV0104_ADC5_GEN3_AMUX_THM4_USB_THERM_100K_PU>;
|
||||||
|
trips {
|
||||||
|
active-config0 {
|
||||||
|
temperature = <125000>;
|
||||||
|
hysteresis = <1000>;
|
||||||
|
type = "passive";
|
||||||
|
};
|
||||||
|
|
||||||
|
active-config1 {
|
||||||
|
temperature = <125000>;
|
||||||
|
hysteresis = <1000>;
|
||||||
|
type = "passive";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
@@ -7,6 +7,7 @@
|
|||||||
/plugin/;
|
/plugin/;
|
||||||
|
|
||||||
#include "tuna-rcm-kiwi.dtsi"
|
#include "tuna-rcm-kiwi.dtsi"
|
||||||
|
#include "tuna-pmiv0108.dtsi"
|
||||||
|
|
||||||
/ {
|
/ {
|
||||||
model = "Qualcomm Technologies, Inc. Tuna RCM + kiwi WLAN";
|
model = "Qualcomm Technologies, Inc. Tuna RCM + kiwi WLAN";
|
||||||
|
@@ -7,6 +7,7 @@
|
|||||||
/plugin/;
|
/plugin/;
|
||||||
|
|
||||||
#include "tuna-rcm.dtsi"
|
#include "tuna-rcm.dtsi"
|
||||||
|
#include "tuna-pmiv0108.dtsi"
|
||||||
|
|
||||||
/ {
|
/ {
|
||||||
model = "Qualcomm Technologies, Inc. Tuna RCM";
|
model = "Qualcomm Technologies, Inc. Tuna RCM";
|
||||||
|
Reference in New Issue
Block a user