ARM: dts: msm: dt snapshot for monaco target
DT snapshot from branch msm-5.15.c2
commit 8ae5ffe89e0f ("ARM: dts: msm: Add mdsp heap for mDSP compute").
Change-Id: If3e807289b6d981865430c4e1a45dabf236fa345
Signed-off-by: Naresh Kumar Lingagalla <quic_nlingaga@quicinc.com>
This commit is contained in:
Naresh Kumar Lingagalla
194
qcom/monaco-pmic.dtsi
Normal file
194
qcom/monaco-pmic.dtsi
Normal file
@@ -0,0 +1,194 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/iio/qti_power_supply_iio.h>
|
||||
|
||||
&pm5100_gpios {
|
||||
key_vol_up {
|
||||
key_vol_up_default: key_vol_up_default {
|
||||
pins = "gpio9";
|
||||
function = "normal";
|
||||
input-enable;
|
||||
bias-pull-up;
|
||||
power-source = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
pmx_sde: pmx_sde {
|
||||
sde_dsi_active: sde_dsi_active {
|
||||
pinconf {
|
||||
pins = "gpio1", "gpio2";
|
||||
function = "normal";
|
||||
qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
|
||||
bias-disable;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
|
||||
sde_dsi_suspend: sde_dsi_suspend {
|
||||
pinconf {
|
||||
pins = "gpio1", "gpio2";
|
||||
function = "normal";
|
||||
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
|
||||
bias-pull-down;
|
||||
output-low;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&soc {
|
||||
gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
label = "gpio-keys";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&key_vol_up_default>;
|
||||
|
||||
vol_up {
|
||||
label = "volume_up";
|
||||
gpios = <&pm5100_gpios 9 GPIO_ACTIVE_LOW>;
|
||||
linux,input-type = <1>;
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
gpio-key,wakeup;
|
||||
debounce-interval = <15>;
|
||||
linux,can-disable;
|
||||
};
|
||||
};
|
||||
|
||||
pmic-pon-log {
|
||||
compatible = "qcom,pmic-pon-log";
|
||||
nvmem = <&pm5100_sdam_5>;
|
||||
nvmem-names = "pon_log";
|
||||
};
|
||||
};
|
||||
|
||||
&pm5100_adc {
|
||||
#thermal-sensor-cells = <1>;
|
||||
status = "ok";
|
||||
|
||||
pm5100_xo_therm {
|
||||
qcom,adc-tm-type = <1>;
|
||||
};
|
||||
|
||||
pm5100_pa_therm_0 {
|
||||
reg = <PM5100_ADC5_GEN3_AMUX4_THM_100K_PU>;
|
||||
label = "pm5100_pa_therm_0";
|
||||
qcom,ratiometric;
|
||||
qcom,hw-settle-time = <200>;
|
||||
qcom,pre-scaling = <1 1>;
|
||||
qcom,adc-tm-type = <1>;
|
||||
};
|
||||
|
||||
pm5100_quiet_therm {
|
||||
reg = <PM5100_ADC5_GEN3_AMUX5_THM_100K_PU>;
|
||||
label = "pm5100_quiet_therm";
|
||||
qcom,ratiometric;
|
||||
qcom,hw-settle-time = <200>;
|
||||
qcom,pre-scaling = <1 1>;
|
||||
qcom,adc-tm-type = <1>;
|
||||
};
|
||||
|
||||
pm5100_msm_therm {
|
||||
reg = <PM5100_ADC5_GEN3_AMUX6_THM_100K_PU>;
|
||||
label = "pm5100_msm_therm";
|
||||
qcom,ratiometric;
|
||||
qcom,hw-settle-time = <200>;
|
||||
qcom,pre-scaling = <1 1>;
|
||||
qcom,adc-tm-type = <1>;
|
||||
};
|
||||
|
||||
pm5100_bat_id {
|
||||
qcom,hw-settle-time = <16000>;
|
||||
};
|
||||
};
|
||||
|
||||
&thermal_zones {
|
||||
xo-therm {
|
||||
polling-delay-passive = <0>;
|
||||
polling-delay = <0>;
|
||||
thermal-sensors = <&pm5100_adc PM5100_ADC5_GEN3_AMUX1_THM_100K_PU>;
|
||||
trips {
|
||||
active-config0 {
|
||||
temperature = <125000>;
|
||||
hysteresis = <1000>;
|
||||
type = "passive";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
pa-therm0 {
|
||||
polling-delay-passive = <0>;
|
||||
polling-delay = <0>;
|
||||
thermal-sensors = <&pm5100_adc PM5100_ADC5_GEN3_AMUX4_THM_100K_PU>;
|
||||
trips {
|
||||
active-config0 {
|
||||
temperature = <125000>;
|
||||
hysteresis = <1000>;
|
||||
type = "passive";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
quiet-therm {
|
||||
polling-delay-passive = <0>;
|
||||
polling-delay = <0>;
|
||||
thermal-sensors = <&pm5100_adc PM5100_ADC5_GEN3_AMUX5_THM_100K_PU>;
|
||||
trips {
|
||||
active-config0 {
|
||||
temperature = <125000>;
|
||||
hysteresis = <1000>;
|
||||
type = "passive";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
sdm-skin-therm {
|
||||
polling-delay-passive = <0>;
|
||||
polling-delay = <0>;
|
||||
thermal-sensors = <&pm5100_adc PM5100_ADC5_GEN3_AMUX6_THM_100K_PU>;
|
||||
trips {
|
||||
active-config0 {
|
||||
temperature = <125000>;
|
||||
hysteresis = <1000>;
|
||||
type = "passive";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&soc {
|
||||
reboot_reason {
|
||||
compatible = "qcom,reboot-reason";
|
||||
nvmem-cells = <&restart_reason>;
|
||||
nvmem-cell-names = "restart_reason";
|
||||
};
|
||||
|
||||
monaco_batterydata: qcom,battery-data {
|
||||
qcom,batt-id-range-pct = <15>;
|
||||
#include "qbg-battery-profile-alium-860-89032-0000-3600mAh.dtsi"
|
||||
#include "qbg-battery-profile-qrd-zwd-520mAh.dtsi"
|
||||
#include "qbg-battery-profile-305mAh.dtsi"
|
||||
};
|
||||
};
|
||||
|
||||
&pm5100_charger {
|
||||
status = "okay";
|
||||
qcom,battery-data = <&monaco_batterydata>;
|
||||
dpdm-supply = <&usb2_phy0>;
|
||||
nvmem-cell-names = "charger_debug_mask", "charger_soc";
|
||||
nvmem-cells = <&charger_debug_mask>, <&charger_soc>;
|
||||
qcom,auto-recharge-soc = <98>;
|
||||
qcom,suspend-input-on-debug-batt;
|
||||
qcom,chg-term-src = <1>;
|
||||
qcom,chg-term-current-ma = <(-20)>;
|
||||
qcom,fcc-stepping-enable;
|
||||
qcom,fcc-step-delay-ms = <1000>;
|
||||
qcom,fcc-step-size-ua = <100000>;
|
||||
qcom,fcc-step-start-ua = <200000>;
|
||||
qcom,concurrency-mode-supported;
|
||||
};
|
||||
Reference in New Issue
Block a user