ARM: dts: msm: Add pmiv0108 support for tuna

Add pmiv0108 support for tuna.

Change-Id: Ib3be05c00cfa1e0eeb5305ba42e196f3eaa7b8fc
Signed-off-by: Kavya Nunna <quic_knunna@quicinc.com>

qcom/pmiv010x.dtsi

@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+
+&spmi_bus {
+	#address-cells = <2>;
+	#size-cells = <0>;
+	interrupt-controller;
+	#interrupt-cells = <4>;
+
+	pmiv010x_7: qcom,pmiv0108@7 {
+		compatible = "qcom,spmi-pmic";
+		reg = <7 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmiv010x_tz: qcom,temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x7 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmiv010x_gpios: pinctrl@8800 {
+			compatible = "qcom,pmiv0108-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pmiv010x_eusb2_repeater: eusb2-repeater@fd00 {
+			compatible = "qcom,pmic-eusb2-repeater";
+			reg = <0xfd00>;
+		};
+
+		pmiv010x_vib: qcom,vibrator@df00 {
+			compatible = "qcom,qpnp-vibrator-ldo";
+			reg = <0xdf00>;
+			qcom,vib-ldo-volt-uv = <3000000>;
+			qcom,disable-overdrive;
+		};
+
+		pmiv010x_amoled: qcom,amoled {
+			compatible = "qcom,amoled-regulator";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			oledb_vreg: oledb@fa00 {
+				reg = <0xfa00>;
+				reg-names = "oledb_base";
+				regulator-name = "oledb";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <8000000>;
+				qcom,swire-control;
+			};
+
+			ab_vreg: ab@f900 {
+				reg = <0xf900>;
+				reg-names = "ab_base";
+				regulator-name = "ab";
+				regulator-min-microvolt = <4600000>;
+				regulator-max-microvolt = <5200000>;
+				qcom,swire-control;
+			};
+
+			ibb_vreg: ibb@f800 {
+				reg = <0xf800>;
+				reg-names = "ibb_base";
+				regulator-name = "ibb";
+				regulator-min-microvolt = <1400000>;
+				regulator-max-microvolt = <6600000>;
+				qcom,swire-control;
+				regulator-allow-set-load;
+			};
+		};
+
+		pmiv010x_amoled_ecm: qcom,amoled-ecm@f900 {
+			compatible = "qcom,amoled-ecm";
+			reg = <0xf900>;
+			status = "disabled";
+
+			nvmem-names = "amoled-ecm-sdam0", "amoled-ecm-sdam1",
+				      "amoled-ecm-sdam2";
+			nvmem = <&pmk8550_sdam_13>, <&pmk8550_sdam_14>,
+				<&pmk8550_sdam_41>;
+			interrupt-names = "ecm-sdam0", "ecm-sdam1",
+					  "ecm-sdam2";
+			interrupts = <0x7 0x7c 0x1 IRQ_TYPE_EDGE_RISING>,
+				     <0x7 0x7d 0x1 IRQ_TYPE_EDGE_RISING>,
+				     <0x7 0x98 0x1 IRQ_TYPE_EDGE_RISING>;
+		};
+	};
+};
+
+&thermal_zones {
+	pmiv010x_temp_alarm: pmiv010x_tz {
+		polling-delay-passive = <100>;
+		polling-delay = <0>;
+		thermal-governor = "step_wise";
+		thermal-sensors = <&pmiv010x_tz>;
+		trips {
+			pmiv010x_trip0: trip0 {
+				temperature = <95000>;
+				hysteresis = <0>;
+				type = "passive";
+			};
+
+			pmiv010x_trip1: trip1 {
+				temperature = <115000>;
+				hysteresis = <0>;
+				type = "passive";
+			};
+
+			pmiv010x_trip2: trip2 {
+				temperature = <145000>;
+				hysteresis = <0>;
+				type = "critical";
+			};
+		};
+	};
+};

qcom/tuna-cdp-overlay.dts

@@ -7,6 +7,7 @@
 /plugin/;
 
 #include "tuna-cdp.dtsi"
+#include "tuna-pmiv0108.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. Tuna CDP";

qcom/tuna-pmiv0108.dtsi

@@ -0,0 +1,186 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/iio/qcom,spmi-adc5-gen3-pmiv0104.h>
+#include "pmiv010x.dtsi"
+
+&pmiv010x_gpios {
+	charger_skin_therm {
+		charger_skin_therm_default: charger_skin_therm_default {
+			pins = "gpio6";
+			bias-high-impedence;
+		};
+	};
+};
+
+&pmiv010x_amoled {
+	status= "disabled";
+};
+
+&pmiv010x_amoled_ecm {
+	status = "disabled";
+};
+
+&pmiv010x_tz {
+	io-channels = <&pmk8550_vadc PMIV0104_ADC5_GEN3_DIE_TEMP>;
+	io-channel-names = "thermal";
+
+};
+
+&battery_charger {
+	#cooling-cells = <2>;
+	qcom,thermal-mitigation-step = <500000>;
+};
+
+&pmk8550_vadc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&charger_skin_therm_default &sys_therm_6_gpio7_default>;
+
+	pmiv010x_ref_gnd {
+		reg = <PMIV0104_ADC5_GEN3_OFFSET_REF>;
+		label = "pmiv010x_ref_gnd";
+		qcom,pre-scaling = <1 1>;
+	};
+
+	pmiv010x_vref_1p25 {
+		reg = <PMIV0104_ADC5_GEN3_1P25VREF>;
+		label = "pmiv010x_vref_1p25";
+		qcom,pre-scaling = <1 1>;
+	};
+
+	pmiv010x_die_temp {
+		reg = <PMIV0104_ADC5_GEN3_DIE_TEMP>;
+		label = "pmiv010x_die_temp";
+		qcom,pre-scaling = <1 1>;
+	};
+
+	pmiv010x_vph_pwr {
+		reg = <PMIV0104_ADC5_GEN3_VPH_PWR>;
+		label = "pmiv010x_vph_pwr";
+		qcom,pre-scaling = <1 3>;
+	};
+
+	pmiv010x_vbat_sns_qbg {
+		reg = <PMIV0104_ADC5_GEN3_VBAT_SNS_QBG>;
+		label = "pmiv010x_vbat_sns";
+		qcom,pre-scaling = <1 3>;
+	};
+
+	pmiv010x_chg_temp {
+		reg = <PMIV0104_ADC5_GEN3_CHG_TEMP>;
+		label = "pmiv010x_chg_temp";
+		qcom,pre-scaling = <1 1>;
+	};
+
+	pmiv010x_bat_therm {
+		reg = <PMIV0104_ADC5_GEN3_AMUX_THM1_BATT_THERM_100K_PU>;
+		label = "pmiv010x_bat_therm";
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		qcom,scale-fn-type = <ADC_SCALE_HW_CALIB_PM5_GEN3_BATT_THERM_100K>;
+	};
+
+	pmiv010x_bat_id {
+		reg = <PMIV0104_ADC5_GEN3_AMUX_THM2_BATT_ID_100K_PU>;
+		label = "pmiv010x_bat_id";
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		qcom,scale-fn-type = <ADC_SCALE_HW_CALIB_PM5_GEN3_BATT_ID_100K>;
+	};
+
+	pmiv010x_iin_fb {
+		reg = <PMIV0104_ADC5_GEN3_IIN_FB>;
+		label = "pmiv010x_iin_fb";
+	};
+
+	pmiv010x_ichg_fb {
+		reg = <PMIV0104_ADC5_GEN3_ICHG_FB>;
+		label = "pmiv010x_ichg_fb";
+	};
+
+	pmiv010x_sys_therm_7 {
+		reg = <PMIV0104_ADC5_GEN3_AMUX_THM6_GPIO6_100K_PU>;
+		label = "pmiv010x_charger_skin_therm";
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		qcom,adc-tm-type = <1>;
+	};
+
+	pmiv010x_sys_therm_8 {
+		reg = <PMIV0104_ADC5_GEN3_AMUX_THM4_USB_THERM_100K_PU>;
+		label = "pmiv010x_conn_therm";
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		qcom,adc-tm-type = <1>;
+	};
+};
+
+&pmic_glink_debug {
+	spmi@0 {
+		reg = <0>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+		qcom,pmiv010x-debug@7 {
+			compatible = "qcom,spmi-pmic";
+			reg = <7 SPMI_USID>;
+			qcom,can-sleep;
+		};
+	};
+};
+
+&spmi0_debug_bus {
+	qcom,pmiv010x-debug@7 {
+		compatible = "qcom,spmi-pmic";
+		reg = <7 SPMI_USID>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+		qcom,can-sleep;
+	};
+};
+
+&thermal_zones {
+	sys-therm-7 {
+		polling-delay-passive = <0>;
+		polling-delay = <0>;
+		thermal-sensors = <&pmk8550_vadc PMIV0104_ADC5_GEN3_AMUX_THM6_GPIO6_100K_PU>;
+		trips {
+			active-config0 {
+				temperature = <125000>;
+				hysteresis = <1000>;
+				type = "passive";
+			};
+
+			active-config1 {
+				temperature = <125000>;
+				hysteresis = <1000>;
+				type = "passive";
+			};
+		};
+	};
+
+	sys-therm-8 {
+		polling-delay-passive = <0>;
+		polling-delay = <0>;
+		thermal-sensors = <&pmk8550_vadc PMIV0104_ADC5_GEN3_AMUX_THM4_USB_THERM_100K_PU>;
+		trips {
+			active-config0 {
+				temperature = <125000>;
+				hysteresis = <1000>;
+				type = "passive";
+			};
+
+			active-config1 {
+				temperature = <125000>;
+				hysteresis = <1000>;
+				type = "passive";
+			};
+		};
+	};
+};

qcom/tuna-rcm-kiwi-overlay.dts

@@ -7,6 +7,7 @@
 /plugin/;
 
 #include "tuna-rcm-kiwi.dtsi"
+#include "tuna-pmiv0108.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. Tuna RCM + kiwi WLAN";

qcom/tuna-rcm-overlay.dts

@@ -7,6 +7,7 @@
 /plugin/;
 
 #include "tuna-rcm.dtsi"
+#include "tuna-pmiv0108.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. Tuna RCM";