diff --git a/qcom/tuna.dtsi b/qcom/tuna.dtsi
index 21b29384..76727e5e 100644
--- a/qcom/tuna.dtsi
+++ b/qcom/tuna.dtsi
@@ -793,6 +793,130 @@
 		interrupt-controller;
 	};
 
+	adsp_pas: remoteproc-adsp@03000000 {
+		compatible = "qcom,tuna-adsp-pas";
+		reg = <0x03000000 0x10000>;
+		status = "ok";
+
+		cx-supply = <&VDD_LPI_CX_LEVEL>;
+		cx-uV-uA = <RPMH_REGULATOR_LEVEL_TURBO 0>;
+		mx-supply = <&VDD_LPI_MX_LEVEL>;
+		mx-uV-uA = <RPMH_REGULATOR_LEVEL_TURBO 0>;
+		reg-names = "cx", "mx";
+		clocks = <&rpmhcc RPMH_CXO_CLK>;
+		clock-names = "xo";
+
+		qcom,qmp = <&aoss_qmp>;
+
+		interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC &mc_virt SLAVE_EBI1>,
+				<&aggre2_noc MASTER_CRYPTO &mc_virt SLAVE_EBI1>;
+		interconnect-names = "rproc_ddr", "crypto_ddr";
+
+		firmware-name = "adsp.mdt", "adsp_dtb.mdt";
+		memory-region = <&adspslpi_mem &q6_adsp_dtb_mem>;
+		/* Inputs from ssc */
+		interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+					<&adsp_smp2p_in 0 0>,
+					<&adsp_smp2p_in 2 0>,
+					<&adsp_smp2p_in 1 0>,
+					<&adsp_smp2p_in 3 0>,
+					<&adsp_smp2p_in 7 0>;
+
+		interrupt-names = "wdog",
+				"fatal",
+				"handover",
+				"ready",
+				"stop-ack",
+				"shutdown-ack";
+
+		/* Outputs to turing */
+		qcom,smem-states = <&adsp_smp2p_out 0>;
+		qcom,smem-state-names = "stop";
+	};
+
+	cdsp_pas: remoteproc-cdsp@32300000 {
+		compatible = "qcom,tuna-cdsp-pas";
+		reg = <0x32300000 0x10000>;
+		status = "ok";
+
+		cx-supply = <&VDD_CX_LEVEL>;
+		cx-uV-uA = <RPMH_REGULATOR_LEVEL_TURBO 100000>;
+		mx-supply = <&VDD_MXC_LEVEL>;
+		mx-uV-uA = <RPMH_REGULATOR_LEVEL_TURBO 100000>;
+		nsp-supply = <&VDD_NSP1_LEVEL>;//To-Do : Verify if VDD_NSP1_LEVEL should be used
+		nsp-uV-uA = <RPMH_REGULATOR_LEVEL_TURBO 100000>;
+		reg-names = "cx","mx","nsp";
+
+		qcom,qmp = <&aoss_qmp>;
+
+		memory-region = <&cdsp_mem &q6_cdsp_dtb_mem &global_sync_mem>;
+
+		clocks = <&rpmhcc RPMH_CXO_CLK>;
+		clock-names = "xo";
+
+		interconnects = <&nsp_noc MASTER_CDSP_PROC &mc_virt SLAVE_EBI1>,
+				<&aggre2_noc MASTER_CRYPTO &mc_virt SLAVE_EBI1>;
+		/* Inputs from turing */
+		interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+					<&cdsp_smp2p_in 0 0>,
+					<&cdsp_smp2p_in 2 0>,
+					<&cdsp_smp2p_in 1 0>,
+					<&cdsp_smp2p_in 3 0>,
+					<&cdsp_smp2p_in 7 0>;
+
+		interrupt-names = "wdog",
+				"fatal",
+				"handover",
+				"ready",
+				"stop-ack",
+				"shutdown-ack";
+
+		/* Outputs to turing */
+		qcom,smem-states = <&cdsp_smp2p_out 0>;
+		qcom,smem-state-names = "stop";
+	};
+
+	modem_pas: remoteproc-mss@04080000 {
+		compatible = "qcom,tuna-modem-pas";
+		reg = <0x4080000 0x10000>;
+		status = "ok";
+
+		clocks = <&rpmhcc RPMH_CXO_CLK>;
+		clock-names = "xo";
+		cx-supply = <&VDD_CX_LEVEL>;
+		cx-uV-uA = <RPMH_REGULATOR_LEVEL_TURBO 100000>;
+		mx-supply = <&VDD_MODEM_LEVEL>;
+		mx-uV-uA = <RPMH_REGULATOR_LEVEL_NOM_L1 100000>;
+		reg-names = "cx", "mx";
+
+		qcom,qmp = <&aoss_qmp>;
+
+		interconnects = <&mc_virt MASTER_LLCC &mc_virt SLAVE_EBI1>,
+				<&aggre2_noc MASTER_CRYPTO &mc_virt SLAVE_EBI1>;
+		interconnect-names = "rproc_ddr", "crypto_ddr";
+
+		memory-region = <&mpss_mem &q6_mpss_dtb_mem &system_cma &dsm_partition_1_mem &dsm_partition_2_mem>;
+
+		/* Inputs from mss */
+		interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
+					<&modem_smp2p_in 0 0>,
+					<&modem_smp2p_in 2 0>,
+					<&modem_smp2p_in 1 0>,
+					<&modem_smp2p_in 3 0>,
+					<&modem_smp2p_in 7 0>;
+
+		interrupt-names = "wdog",
+				"fatal",
+				"handover",
+				"ready",
+				"stop-ack",
+				"shutdown-ack";
+
+		/* Outputs to mss */
+		qcom,smem-states = <&modem_smp2p_out 0>;
+		qcom,smem-state-names = "stop";
+	};
+
 	tlmm: pinctrl@f000000 {
 		compatible = "qcom,tuna-tlmm";
 		reg = <0x0f000000 0x1000000>;