Merge changes I781e670f,I70b37405,I983c4912,I7c3636f9 into kernel.lnx.6.6.r1-rel

* changes:
  ARM: dts: msm: Enable nb7vpq904m redriver on Kera QRD platfrom
  ARM: dts: msm: Include pmiv0102 for kera qrd platforms
  ARM: dts: msm: Disable sys-therm-11 node for kera
  ARM: dts: qcom: remove unused gpio

qcom/kera-atp.dtsi

@@ -31,3 +31,15 @@
 &pmic_glink_adc {
 	status = "disabled";
 };
+
+&pmxr2230_sys_therm_11 {
+	status = "disabled";
+};
+
+&sys_therm_11 {
+	status = "disabled";
+};
+
+&pm8550ve_f_die_temp {
+	status = "disabled";
+};

qcom/kera-cdp.dtsi

@@ -64,3 +64,15 @@
 						&tlmm 3 0 &tlmm 16 0 &tlmm 13 0x2008>;
 	};
 };
+
+&pmxr2230_sys_therm_11 {
+	status = "disabled";
+};
+
+&sys_therm_11 {
+	status = "disabled";
+};
+
+&pm8550ve_f_die_temp {
+	status = "disabled";
+};

qcom/kera-mtp.dtsi

@@ -7,7 +7,6 @@
 #include <dt-bindings/clock/qcom,gcc-kera.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/spmi/spmi.h>
-#include "pmk8550.dtsi"
 
 &sdhc_2 {
 	vdd-supply = <&L13B>;
@@ -77,3 +76,15 @@
 						&tlmm 3 0 &tlmm 16 0 &tlmm 13 0x2008>;
 	};
 };
+
+&pmxr2230_sys_therm_11 {
+	status = "disabled";
+};
+
+&sys_therm_11 {
+	status = "disabled";
+};
+
+&pm8550ve_f_die_temp {
+	status = "disabled";
+};

qcom/kera-pinctrl.dtsi

@@ -94,37 +94,6 @@
 		};
 	};
 
-	i2s0_sd1 {
-		i2s0_sd1_sleep: i2s0_sd1_sleep {
-			mux {
-				pins = "gpio63";
-				function = "gpio";
-			};
-
-			config {
-				pins = "gpio63";
-				drive-strength = <2>;   /* 2 mA */
-				bias-pull-down;         /* PULL DOWN */
-				input-enable;
-			};
-		};
-
-		i2s0_sd1_active: i2s0_sd1_active {
-			mux {
-				pins = "gpio63";
-				function = "i2s0_data1";
-			};
-
-			config {
-				pins = "gpio63";
-				drive-strength = <8>;   /* 8 mA */
-				bias-disable;           /* NO PULL */
-				output-high;
-			};
-		};
-	};
-
-
 	/* WCD reset pin */
 	wcd_reset_active: wcd_reset_active {
 		mux {

qcom/kera-pmic-overlay.dtsi

@@ -24,6 +24,3 @@
 	};
 };
 
-&thermal_zones {
-	/delete-node/ sys-therm-11;
-};

qcom/kera-pmiv0102.dtsi

@@ -9,10 +9,6 @@
 	status= "ok";
 };
 
-&pmiv010x_amoled_ecm {
-	status = "ok";
-};
-
 &pmiv010x_eusb2_repeater {
 	vdd18-supply = <&L7B>;
 	vdd3-supply = <&L17B>;

qcom/kera-qrd-qca6750-ufs2-overlay.dts

@@ -7,6 +7,7 @@
 /plugin/;
 
 #include "kera-qrd-qca6750-ufs2.dtsi"
+#include "kera-pmiv0102.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. Kera QRD + QCA6750 + UFS2";

qcom/kera-qrd-wcn7750-ufs2-overlay.dts

@@ -7,6 +7,7 @@
 /plugin/;
 
 #include "kera-qrd-wcn7750-ufs2.dtsi"
+#include "kera-pmiv0102.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. Kera QRD + WCN7750 + UFS2";

qcom/kera-qrd-wcn7750-ufs3-overlay.dts

@@ -7,6 +7,7 @@
 /plugin/;
 
 #include "kera-qrd-wcn7750-ufs3.dtsi"
+#include "kera-pmiv0102.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. Kera QRD + WCN7750 + UFS3";

qcom/kera-qrd.dtsi

@@ -106,3 +106,66 @@
 		label = "smb1393_1_die_temp";
 	};
 };
+
+&pmxr2230_sys_therm_11 {
+	status = "disabled";
+};
+
+&sys_therm_11 {
+	status = "disabled";
+};
+
+&pm8550ve_f_die_temp {
+	status = "disabled";
+};
+
+&qupv3_se4_i2c {
+	status = "ok";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	redriver: redriver@1c {
+		compatible = "onnn,redriver";
+		reg = <0x1c>;
+
+		vdd-supply = <&L7B>;
+
+		lane-channel-swap;
+
+		eq = /bits/ 8 <
+				/* Parameters for USB */
+				0x4 0x4 0x4 0x4
+				/* Parameters for DP */
+				0x5 0x7 0x7 0x5>;
+		flat-gain = /bits/ 8 <
+				/* Parameters for USB */
+				0x3 0x1 0x1 0x3
+				/* Parameters for DP */
+				0x0 0x3 0x3 0x0>;
+		output-comp = /bits/ 8 <
+				/* Parameters for USB */
+				0x3 0x3 0x3 0x3
+				/* Parameters for DP */
+				0x3 0x3 0x3 0x3>;
+		loss-match = /bits/ 8 <
+				/* Parameters for USB */
+				0x1 0x3 0x3 0x1
+				/* Parameters for DP */
+				0x3 0x3 0x3 0x3>;
+	};
+};
+
+&usb_qmp_dp_phy {
+	pinctrl-names = "unused";
+};
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb3phy_portselect_gpio>;
+	gpios = <&tlmm 122 0>;
+
+	ssusb_redriver = <&redriver>;
+
+	qcom,wcd_usbss = <&wcd_usbss>;
+
+};

qcom/kera-rcm-wcn7750-ufs4-overlay.dts

@@ -7,6 +7,7 @@
 /plugin/;
 
 #include "kera-rcm-wcn7750-ufs4.dtsi"
+#include "kera-pmiv0102.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. Kera RCM + WCN7750 + UFS4";

qcom/kera-rcm.dtsi

@@ -64,3 +64,15 @@
 						&tlmm 3 0 &tlmm 16 0 &tlmm 13 0x2008>;
 	};
 };
+
+&pmxr2230_sys_therm_11 {
+	status = "disabled";
+};
+
+&sys_therm_11 {
+	status = "disabled";
+};
+
+&pm8550ve_f_die_temp {
+	status = "disabled";
+};

qcom/tuna-pmic-overlay.dtsi

@@ -279,7 +279,7 @@
 		};
 	};
 
-	sys-therm-11 {
+	sys_therm_11: sys-therm-11 {
 		polling-delay-passive = <0>;
 		polling-delay = <0>;
 		thermal-sensors = <&pmk8550_vadc PMXR2230_ADC5_GEN3_AMUX_THM5_100K_PU>;
@@ -387,7 +387,7 @@
 		qcom,adc-tm-type = <1>;
 	};
 
-	pmxr2230_sys_therm_11 {
+	pmxr2230_sys_therm_11: pmxr2230_sys_therm_11 {
 		reg = <PMXR2230_ADC5_GEN3_AMUX_THM5_100K_PU>;
 		label = "pmxr2230_sys_therm_11";
 		qcom,ratiometric;
@@ -408,7 +408,7 @@
 		qcom,pre-scaling = <1 1>;
 	};
 
-	pm8550ve_f_die_temp {
+	pm8550ve_f_die_temp: pm8550ve_f_die_temp {
 		reg = <PM8550VX_ADC5_GEN3_DIE_TEMP(5)>;
 		label = "pm8550ve_f_die_temp";
 		qcom,pre-scaling = <1 1>;