Merge 9beba3aef1 on remote branch
Change-Id: I0d0ec2503205cad5d9bf5164efbfef0f68141477
This commit is contained in:
Linux Build Service Account
97
bindings/pinctrl/qcom,sm6150-pinctrl.yaml
Normal file
97
bindings/pinctrl/qcom,sm6150-pinctrl.yaml
Normal file
@@ -0,0 +1,97 @@
|
||||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/pinctrl/qcom,sm6150-pinctrl.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Qualcomm Technologies, Inc. SM6150 TLMM block
|
||||
|
||||
maintainers:
|
||||
- Ankur Matariya <quic_amatariy@quicinc.com>
|
||||
|
||||
description: |
|
||||
This binding describes the Top Level Mode Multiplexer block found in the SM6150 platform.
|
||||
|
||||
allOf:
|
||||
- $ref: "pinctrl.yaml#"
|
||||
- $ref: "/schemas/pinctrl/qcom,tlmm-common.yaml#"
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
description: Must be "qcom,sm6150-pinctrl"
|
||||
|
||||
reg:
|
||||
description: The base address and size of the north, south, west, and east TLMM tiles.
|
||||
minItems: 1
|
||||
items:
|
||||
- description: "North TLMM tile"
|
||||
- description: "South TLMM tile"
|
||||
- description: "West TLMM tile"
|
||||
- description: "East TLMM tile"
|
||||
|
||||
reg-names:
|
||||
description: Names for the reg cells, must contain "north", "south", "west", and "east".
|
||||
items:
|
||||
- const: "west"
|
||||
- const: "south"
|
||||
- const: "east"
|
||||
- const: "north"
|
||||
|
||||
interrupts:
|
||||
description: Specifies the TLMM summary IRQ.
|
||||
maxItems: 1
|
||||
|
||||
interrupt-controller:
|
||||
description: Identifies this node as an interrupt controller.
|
||||
type: boolean
|
||||
|
||||
'#interrupt-cells':
|
||||
description: Must be 2, specifying the pin number and flags.
|
||||
const: 2
|
||||
|
||||
gpio-controller:
|
||||
description: Identifies this node as a GPIO controller.
|
||||
type: boolean
|
||||
|
||||
'#gpio-cells':
|
||||
description: Must be 2, specifying the pin number and flags.
|
||||
const: 2
|
||||
|
||||
gpio-ranges:
|
||||
description: See ../gpio/gpio.txt.
|
||||
maxItems: 1
|
||||
|
||||
gpio-reserved-ranges:
|
||||
description: Optional reserved ranges of GPIOs.
|
||||
maxItems: 1
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- reg-names
|
||||
- interrupts
|
||||
- interrupt-controller
|
||||
- '#interrupt-cells'
|
||||
- gpio-controller
|
||||
- '#gpio-cells'
|
||||
- gpio-ranges
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
tlmm: pinctrl@3000000 {
|
||||
compatible = "qcom,sm6150-pinctrl";
|
||||
reg = <0x03100000 0x300000>,
|
||||
<0x03500000 0x300000>,
|
||||
<0x03900000 0x300000>,
|
||||
<0x03D00000 0x300000>;
|
||||
reg-names = "west", "east", "north", "south";
|
||||
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
gpio-ranges = <&tlmm 0 0 175>;
|
||||
gpio-reserved-ranges = <0 4>, <126 4>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
189
bindings/soc/qcom/qcom,usb-bam.yaml
Normal file
189
bindings/soc/qcom/qcom,usb-bam.yaml
Normal file
@@ -0,0 +1,189 @@
|
||||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: "http://devicetree.org/schemas/soc/qcom/qcom,usb-bam.yaml#"
|
||||
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
|
||||
|
||||
title: MSM USB Bus Access Manager (BAM)
|
||||
|
||||
maintainers:
|
||||
- Abdul Salam <quic_asalam@quicinc.com>
|
||||
|
||||
description:
|
||||
This describes the device used to interface the USB controller
|
||||
with the Smart Peripheral Subsystem (SPS). The BAM serves to
|
||||
connect USB directly with other peer peripherals in the system
|
||||
and is statically configured with a number of unidirectional pipes.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: qcom,usb-bam-msm
|
||||
|
||||
reg:
|
||||
description: pair of physical base addresses and region size of BAM device
|
||||
|
||||
interrupts:
|
||||
description: IRQ line for BAM device
|
||||
maxItems: 1
|
||||
|
||||
qcom,usb-bam-num-pipes:
|
||||
description: max number of pipes that can be used
|
||||
|
||||
qcom,usb-bam-fifo-baseaddr:
|
||||
description: |
|
||||
base address for bam pipe's data and descriptor
|
||||
fifos. This can be on chip memory (ocimem). This
|
||||
property is required if sub-node's mem-type is ocimem or usb private mem.
|
||||
|
||||
qcom,disable-clk-gating:
|
||||
description: If present then disable BAM clock gating.
|
||||
|
||||
qcom,usb-bam-override-threshold:
|
||||
description: |
|
||||
If present then the default 512 byte threshold
|
||||
is overridden. This threshold configures the threshold value for Read/Write
|
||||
event generation by the BAM towards another BAM.
|
||||
|
||||
qcom,usb-bam-max-mbps-highspeed:
|
||||
description: |
|
||||
max mbps in high speed connection
|
||||
for either rx or tx direction.
|
||||
|
||||
qcom,usb-bam-max-mbps-superspeed:
|
||||
description: |
|
||||
max mbps in super speed connection
|
||||
for either rx or tx direction.
|
||||
|
||||
qcom,reset-bam-on-connect:
|
||||
description: |
|
||||
If present then BAM is RESET before connecting
|
||||
pipe. This may be required if BAM peripheral is also reset before connect.
|
||||
|
||||
qcom,reset-bam-on-disconnect:
|
||||
description: If present then BAM is RESET after disconnecting pipes.
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- interrupts
|
||||
- qcom,usb-bam-num-pipes
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
patternProperties:
|
||||
"^qcom,pipe[0-9]+$":
|
||||
type: object
|
||||
description: A number of USB BAM pipe parameters are represented as sub-nodes
|
||||
|
||||
properties:
|
||||
label:
|
||||
description: |
|
||||
a string describing uniquely the usb bam pipe. The string can be
|
||||
constracted as follows- <core>-<peer>-<direction>-<pipe num>.
|
||||
core options- hsusb, ssusb/dwc3, hsic
|
||||
peer options- qdss, ipa
|
||||
direction options- in (from peer to usb), out (from usb to peer)
|
||||
pipe num options- 0..127
|
||||
|
||||
qcom,usb-bam-mem-type:
|
||||
description: |
|
||||
Type of memory used by this PIPE. Can be one of
|
||||
0 - Uses SPS's dedicated pipe memory
|
||||
1 - System RAM allocated by driver
|
||||
2 - OCI memory residing @ 'qcom,usb-bam-fifo-baseaddr'
|
||||
|
||||
qcom,dir:
|
||||
description: |
|
||||
pipe direction
|
||||
0 - from usb (out)
|
||||
1 - to usb (in)
|
||||
|
||||
qcom,pipe-num:
|
||||
description: pipe number
|
||||
|
||||
qcom,peer-bam:
|
||||
description: |
|
||||
peer BAM can be one of
|
||||
0 - QDSS_P_BAM
|
||||
1 - IPA_P_BAM
|
||||
|
||||
qcom,data-fifo-size:
|
||||
description: data fifo size
|
||||
|
||||
qcom,descriptor-fifo-size:
|
||||
description: descriptor fifo size
|
||||
|
||||
qcom,peer-bam-physical-address:
|
||||
description: |
|
||||
peer BAM's physical address.
|
||||
Not specified for IPA and used only for qdss connection
|
||||
|
||||
qcom,dst-bam-pipe-index:
|
||||
description: destination BAM pipe index
|
||||
|
||||
qcom,src-bam-pipe-index:
|
||||
description: source BAM pipe index
|
||||
|
||||
qcom,data-fifo-offset:
|
||||
description: data fifo offset address
|
||||
|
||||
qcom,descriptor-fifo-offset:
|
||||
description: descriptor fifo offset address
|
||||
|
||||
qcom,pipe-connection-type:
|
||||
description: |
|
||||
type of pipe connection. Can be one of
|
||||
0 - BAM2BAM (default if not specified)
|
||||
1 - SYS2BAM (only supported on UL)
|
||||
|
||||
required:
|
||||
- label
|
||||
- qcom,usb-bam-mem-type
|
||||
- qcom,dir
|
||||
- qcom,pipe-num
|
||||
- qcom,peer-bam
|
||||
- qcom,data-fifo-size
|
||||
- qcom,descriptor-fifo-size
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
qcom,usbbam@f9a44000 {
|
||||
compatible = "qcom,usb-bam-msm";
|
||||
reg = <0xf9a44000 0x11000>;
|
||||
interrupts = <0 135 0>;
|
||||
qcom,usb-bam-num-pipes = <16>;
|
||||
qcom,ignore-core-reset-ack;
|
||||
qcom,disable-clk-gating;
|
||||
qcom,usb-bam-max-mbps-highspeed = <400>;
|
||||
qcom,usb-bam-max-mbps-superspeed = <3600>;
|
||||
qcom,bam-type = <1>;
|
||||
qcom,bam-mode = <0>;
|
||||
|
||||
qcom,pipe0 {
|
||||
label = "hsusb-ipa-out-0";
|
||||
qcom,usb-bam-mem-type = <0>;
|
||||
qcom,dir = <0>;
|
||||
qcom,pipe-num = <0>;
|
||||
qcom,peer-bam = <2>;
|
||||
qcom,src-bam-pipe-index = <1>;
|
||||
qcom,data-fifo-offset = <0x2200>;
|
||||
qcom,data-fifo-size = <0x1e00>;
|
||||
qcom,descriptor-fifo-offset = <0x2100>;
|
||||
qcom,descriptor-fifo-size = <0x100>;
|
||||
};
|
||||
qcom,pipe1 {
|
||||
label = "hsusb-ipa-in-0";
|
||||
qcom,usb-bam-mem-type = <0>;
|
||||
qcom,dir = <1>;
|
||||
qcom,pipe-num = <0>;
|
||||
qcom,peer-bam = <2>;
|
||||
qcom,dst-bam-pipe-index = <0>;
|
||||
qcom,data-fifo-offset = <0x300>;
|
||||
qcom,data-fifo-size = <0x1e00>;
|
||||
qcom,descriptor-fifo-offset = <0>;
|
||||
qcom,descriptor-fifo-size = <0x300>;
|
||||
};
|
||||
};
|
||||
...
|
||||
228
bindings/usb/qcom,qusb2phy.yaml
Normal file
228
bindings/usb/qcom,qusb2phy.yaml
Normal file
@@ -0,0 +1,228 @@
|
||||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/usb/qcom,qusb2phy.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Qualcomm Technologies, Inc. Qualcomm USB Phy
|
||||
|
||||
maintainers:
|
||||
- Udipto Goswami <quic_ugoswami@quicinc.com>
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- qcom,qusb2phy
|
||||
- qcom,qusb2phy-v2
|
||||
|
||||
reg:
|
||||
description: Address and length of the registers set for the phy.
|
||||
minItems: 1
|
||||
maxItems: 7
|
||||
|
||||
reg-names:
|
||||
minItems: 1
|
||||
items:
|
||||
- const: qusb_phy_base
|
||||
- const: eud_enable_reg
|
||||
- const: efuse_addr
|
||||
- const: refgen_north_bg_reg_addr
|
||||
|
||||
qcom,efuse-bit-pos:
|
||||
description: External fuse register bit required for phy functionality.
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
|
||||
qcom,efuse-num-bits:
|
||||
description: External fuse register number of bit to be read.
|
||||
|
||||
vdd-supply:
|
||||
description: vdd supply for HSPHY digital circuit operation.
|
||||
|
||||
vdda18-supply:
|
||||
description: 1.8 V for HSPHY.
|
||||
|
||||
vdda33-supply:
|
||||
description: 3.3 V for HSPHY.
|
||||
|
||||
refgen-supply:
|
||||
description: Refgen regulator required for phy to work.
|
||||
|
||||
qcom,vdd-voltage-level:
|
||||
description: Voltage level of the vdd supply.
|
||||
This is set to min value to vote from usb.
|
||||
$ref: /schemas/types.yaml#/definitions/uint32-array
|
||||
|
||||
clocks:
|
||||
description: |
|
||||
A list of phandles to the phy clocks::
|
||||
- ref_clk_src:: Reference clk source required for enumeration.
|
||||
- ref_clk:: Reference clk required for enumeration.
|
||||
minItems: 1
|
||||
maxItems: 3
|
||||
|
||||
clock-names:
|
||||
minItems: 1
|
||||
items:
|
||||
- const: ref_clk_src
|
||||
- const: ref_clk
|
||||
|
||||
resets:
|
||||
maxItems: 1
|
||||
|
||||
reset-names:
|
||||
items:
|
||||
- const: phy_reset
|
||||
|
||||
phy_type:
|
||||
oneOf:
|
||||
- items:
|
||||
- const: utmi
|
||||
- items:
|
||||
- const: ulpi
|
||||
|
||||
qcom,qusb-phy-init-seq:
|
||||
description: Phy Initialization sequence required for init.
|
||||
items:
|
||||
items:
|
||||
-
|
||||
description: address
|
||||
-
|
||||
description: value
|
||||
|
||||
qcom,qusb-phy-reg-offset:
|
||||
description: Phy Register offsets required for probe.
|
||||
$ref: /schemas/types.yaml#/definitions/uint32-array
|
||||
items:
|
||||
-
|
||||
description: address
|
||||
|
||||
qcom,qusb-phy-host-init-seq:
|
||||
description: Host mode phy initialization sequence required for init.
|
||||
items:
|
||||
items:
|
||||
-
|
||||
description: address
|
||||
-
|
||||
description: value
|
||||
|
||||
if:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
enum:
|
||||
- qcom,qusb2phy-v2
|
||||
then:
|
||||
required:
|
||||
- qcom,qusb-phy-reg-offset
|
||||
- qcom,qusb-phy-host-init-seq
|
||||
else:
|
||||
properties:
|
||||
qcom,qusb-phy-reg-offset: false
|
||||
qcom,qusb-phy-host-init-seq: false
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- clocks
|
||||
- clock-names
|
||||
- vdd-supply
|
||||
- vdda18-supply
|
||||
- vdda33-supply
|
||||
- resets
|
||||
- phy_type
|
||||
- qcom,qusb-phy-init-seq
|
||||
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/clock/qcom,rpmcc.h>
|
||||
#include <dt-bindings/clock/qcom,gcc-holi.h>
|
||||
|
||||
qusb2_phy0: qusb@162b000 {
|
||||
compatible = "qcom,qusb2phy-v2";
|
||||
reg = <0x162B000 0x114>,
|
||||
<0x0162A000 0x1000>,
|
||||
<0x1b40268 0x4>,
|
||||
<0x0162f014 0x4>;
|
||||
|
||||
reg-names = "qusb_phy_base",
|
||||
"eud_enable_reg",
|
||||
"efuse_addr",
|
||||
"refgen_north_bg_reg_addr";
|
||||
|
||||
qcom,efuse-bit-pos = <25>;
|
||||
qcom,efuse-num-bits = <3>;
|
||||
|
||||
vdd-supply = <&L18A>;
|
||||
vdda18-supply = <&L2A>;
|
||||
vdda33-supply = <&L3A>;
|
||||
refgen-supply = <&L22A>;
|
||||
qcom,vdd-voltage-level = <0 880000 880000>;
|
||||
|
||||
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
|
||||
<&gcc GCC_USB3_PRIM_CLKREF_CLK>;
|
||||
clock-names = "ref_clk_src", "ref_clk";
|
||||
|
||||
resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
|
||||
reset-names = "phy_reset";
|
||||
|
||||
phy_type= "utmi";
|
||||
|
||||
qcom,qusb-phy-reg-offset =
|
||||
<0x240 /* QUSB2PHY_PORT_TUNE1 */
|
||||
0x1a0 /* QUSB2PHY_PLL_COMMON_STATUS_ONE */
|
||||
0x210 /* QUSB2PHY_PWR_CTRL1 */
|
||||
0x230 /* QUSB2PHY_INTR_CTRL */
|
||||
0x0a8 /* QUSB2PHY_PLL_CORE_INPUT_OVERRIDE */
|
||||
0x254 /* QUSB2PHY_TEST1 */
|
||||
0x198 /* PLL_BIAS_CONTROL_2 */
|
||||
0x27c /* QUSB2PHY_DEBUG_CTRL1 */
|
||||
0x280 /* QUSB2PHY_DEBUG_CTRL2 */
|
||||
0x284 /* QUSB2PHY_DEBUG_CTRL3 */
|
||||
0x288 /* QUSB2PHY_DEBUG_CTRL4 */
|
||||
0x2a0>; /* QUSB2PHY_STAT5 */
|
||||
|
||||
qcom,qusb-phy-init-seq =
|
||||
/* <value reg_offset> */
|
||||
<0x23 0x210 /* PWR_CTRL1 */
|
||||
0x03 0x04 /* PLL_ANALOG_CONTROLS_TWO */
|
||||
0x7c 0x18c /* PLL_CLOCK_INVERTERS */
|
||||
0x80 0x2c /* PLL_CMODE */
|
||||
0x0a 0x184 /* PLL_LOCK_DELAY */
|
||||
0x19 0xb4 /* PLL_DIGITAL_TIMERS_TWO */
|
||||
0x40 0x194 /* PLL_BIAS_CONTROL_1 */
|
||||
0x22 0x198 /* PLL_BIAS_CONTROL_2 */
|
||||
0x21 0x214 /* PWR_CTRL2 */
|
||||
0x08 0x220 /* IMP_CTRL1 */
|
||||
0x58 0x224 /* IMP_CTRL2 */
|
||||
0x45 0x240 /* TUNE1 */
|
||||
0x29 0x244 /* TUNE2 */
|
||||
0xca 0x248 /* TUNE3 */
|
||||
0x04 0x24c /* TUNE4 */
|
||||
0x03 0x250 /* TUNE5 */
|
||||
0x30 0x23c /* CHG_CTRL2 */
|
||||
0x22 0x210>; /* PWR_CTRL1 */
|
||||
|
||||
qcom,qusb-phy-host-init-seq =
|
||||
/* <value reg_offset> */
|
||||
<0x23 0x210 /* PWR_CTRL1 */
|
||||
0x03 0x04 /* PLL_ANALOG_CONTROLS_TWO */
|
||||
0x7c 0x18c /* PLL_CLOCK_INVERTERS */
|
||||
0x80 0x2c /* PLL_CMODE */
|
||||
0x0a 0x184 /* PLL_LOCK_DELAY */
|
||||
0x19 0xb4 /* PLL_DIGITAL_TIMERS_TWO */
|
||||
0x40 0x194 /* PLL_BIAS_CONTROL_1 */
|
||||
0x22 0x198 /* PLL_BIAS_CONTROL_2 */
|
||||
0x21 0x214 /* PWR_CTRL2 */
|
||||
0x08 0x220 /* IMP_CTRL1 */
|
||||
0x58 0x224 /* IMP_CTRL2 */
|
||||
0x45 0x240 /* TUNE1 */
|
||||
0x29 0x244 /* TUNE2 */
|
||||
0xca 0x248 /* TUNE3 */
|
||||
0x04 0x24c /* TUNE4 */
|
||||
0x03 0x250 /* TUNE5 */
|
||||
0x30 0x23c /* CHG_CTRL2 */
|
||||
0x22 0x210>; /* PWR_CTRL1 */
|
||||
};
|
||||
@@ -61,6 +61,10 @@
|
||||
reg = <0x58 0x1>;
|
||||
};
|
||||
|
||||
xo_calib_data: xo_calib-data@59 {
|
||||
reg = <0x59 0x1>;
|
||||
};
|
||||
|
||||
alarm_log: alarm-log@76 {
|
||||
reg = <0x76 0x6>;
|
||||
};
|
||||
|
||||
706
qcom/sm6150-regulator.dtsi
Normal file
706
qcom/sm6150-regulator.dtsi
Normal file
@@ -0,0 +1,706 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) 2023-2025 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/regulator/qcom,rpmh-regulator-levels.h>
|
||||
|
||||
&apps_rsc_drv2 {
|
||||
/* RPMh regulators: */
|
||||
|
||||
/* pm6150 S3 - VDD_MX supply */
|
||||
rpmh-regulator-mxlvl {
|
||||
compatible = "qcom,rpmh-arc-regulator";
|
||||
qcom,resource-name = "mx.lvl";
|
||||
|
||||
VDD_MX_LEVEL:
|
||||
S3A_LEVEL: pm6150_s3_level: regulator-pm6150-s3 {
|
||||
regulator-name = "pm6150_s3_level";
|
||||
qcom,set = <RPMH_REGULATOR_SET_ALL>;
|
||||
regulator-min-microvolt =
|
||||
<RPMH_REGULATOR_LEVEL_RETENTION>;
|
||||
regulator-max-microvolt =
|
||||
<RPMH_REGULATOR_LEVEL_MAX>;
|
||||
qcom,init-voltage-level =
|
||||
<RPMH_REGULATOR_LEVEL_RETENTION>;
|
||||
};
|
||||
|
||||
VDD_MX_LEVEL_AO:
|
||||
S3A_LEVEL_AO: pm6150_s3_level_ao: regulator-pm6150-s3-level-ao {
|
||||
regulator-name = "pm6150_s3_level_ao";
|
||||
qcom,set = <RPMH_REGULATOR_SET_ACTIVE>;
|
||||
regulator-min-microvolt =
|
||||
<RPMH_REGULATOR_LEVEL_RETENTION>;
|
||||
regulator-max-microvolt =
|
||||
<RPMH_REGULATOR_LEVEL_MAX>;
|
||||
qcom,init-voltage-level =
|
||||
<RPMH_REGULATOR_LEVEL_RETENTION>;
|
||||
};
|
||||
};
|
||||
|
||||
/* pm6150 S1 - VDD_CX supply */
|
||||
rpmh-regulator-cxlvl {
|
||||
compatible = "qcom,rpmh-arc-regulator";
|
||||
qcom,resource-name = "cx.lvl";
|
||||
proxy-supply = <&VDD_CX_LEVEL>;
|
||||
|
||||
VDD_CX_LEVEL:
|
||||
S1A_LEVEL: pm6150_s1_level: regulator-pm6150-s1 {
|
||||
regulator-name = "pm6150_s1_level";
|
||||
qcom,set = <RPMH_REGULATOR_SET_ALL>;
|
||||
pm6150_s1_level-parent-supply = <&VDD_MX_LEVEL>;
|
||||
regulator-min-microvolt =
|
||||
<RPMH_REGULATOR_LEVEL_RETENTION>;
|
||||
regulator-max-microvolt =
|
||||
<RPMH_REGULATOR_LEVEL_MAX>;
|
||||
qcom,init-voltage-level =
|
||||
<RPMH_REGULATOR_LEVEL_RETENTION>;
|
||||
qcom,min-dropout-voltage-level = <(-1)>;
|
||||
};
|
||||
|
||||
VDD_CX_LEVEL_AO:
|
||||
S1A_LEVEL_AO: pm6150_s1_level_ao: regulator-pm6150-s1-level-ao {
|
||||
qcom,set = <RPMH_REGULATOR_SET_ACTIVE>;
|
||||
regulator-name = "pm6150_s1_level_ao";
|
||||
vin-supply = <&VDD_MX_LEVEL_AO>;
|
||||
regulator-min-microvolt =
|
||||
<RPMH_REGULATOR_LEVEL_RETENTION>;
|
||||
regulator-max-microvolt =
|
||||
<RPMH_REGULATOR_LEVEL_MAX>;
|
||||
qcom,init-voltage-level =
|
||||
<RPMH_REGULATOR_LEVEL_RETENTION>;
|
||||
qcom,min-dropout-voltage-level = <(-1)>;
|
||||
};
|
||||
};
|
||||
|
||||
rpmh-regulator-smpc1 {
|
||||
compatible = "qcom,rpmh-vrm-regulator";
|
||||
qcom,resource-name = "smpc1";
|
||||
S1C: pm6150l_s1: regulator-pm6150l-s1 {
|
||||
regulator-name = "pm6150l_s1";
|
||||
qcom,set = <RPMH_REGULATOR_SET_ALL>;
|
||||
regulator-min-microvolt = <1128000>;
|
||||
regulator-max-microvolt = <1128000>;
|
||||
qcom,init-voltage = <1128000>;
|
||||
};
|
||||
};
|
||||
|
||||
rpmh-regulator-smpc2 {
|
||||
compatible = "qcom,rpmh-vrm-regulator";
|
||||
qcom,resource-name = "smpc2";
|
||||
S2C: pm6150l_s2: regulator-pm6150l-s2 {
|
||||
regulator-name = "pm6150l_s2";
|
||||
qcom,set = <RPMH_REGULATOR_SET_ALL>;
|
||||
regulator-min-microvolt = <348000>;
|
||||
regulator-max-microvolt = <648000>;
|
||||
qcom,init-voltage = <348000>;
|
||||
};
|
||||
};
|
||||
|
||||
/* pm6150l S7 - VDD_MSS supply */
|
||||
rpmh-regulator-modemlvl {
|
||||
compatible = "qcom,rpmh-arc-regulator";
|
||||
qcom,resource-name = "mss.lvl";
|
||||
|
||||
VDD_MSS_LEVEL:
|
||||
S7C_LEVEL: pm6150l_s7_level: regulator-pm6150l-s7 {
|
||||
regulator-name = "pm6150l_s7_level";
|
||||
qcom,set = <RPMH_REGULATOR_SET_ALL>;
|
||||
regulator-min-microvolt =
|
||||
<RPMH_REGULATOR_LEVEL_RETENTION>;
|
||||
regulator-max-microvolt =
|
||||
<RPMH_REGULATOR_LEVEL_MAX>;
|
||||
qcom,init-voltage-level =
|
||||
<RPMH_REGULATOR_LEVEL_RETENTION>;
|
||||
};
|
||||
};
|
||||
|
||||
rpmh-regulator-smpc8 {
|
||||
compatible = "qcom,rpmh-vrm-regulator";
|
||||
qcom,resource-name = "smpc8";
|
||||
S8C: pm6150l_s8: regulator-pm6150l-s8 {
|
||||
regulator-name = "pm6150l_s8";
|
||||
qcom,set = <RPMH_REGULATOR_SET_ALL>;
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1400000>;
|
||||
qcom,init-voltage = <1200000>;
|
||||
};
|
||||
};
|
||||
|
||||
rpmh-regulator-ldoa1 {
|
||||
compatible = "qcom,rpmh-vrm-regulator";
|
||||
qcom,resource-name = "ldoa1";
|
||||
qcom,regulator-type = "pmic5-ldo";
|
||||
qcom,supported-modes =
|
||||
<RPMH_REGULATOR_MODE_LPM
|
||||
RPMH_REGULATOR_MODE_HPM>;
|
||||
qcom,mode-threshold-currents = <0 1>;
|
||||
L1A: pm6150_l1: regulator-pm6150-l1 {
|
||||
regulator-name = "pm6150_l1";
|
||||
qcom,set = <RPMH_REGULATOR_SET_ALL>;
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1252000>;
|
||||
qcom,init-voltage = <1200000>;
|
||||
};
|
||||
};
|
||||
|
||||
rpmh-regulator-ldoa2 {
|
||||
compatible = "qcom,rpmh-vrm-regulator";
|
||||
qcom,resource-name = "ldoa2";
|
||||
qcom,regulator-type = "pmic5-ldo";
|
||||
qcom,supported-modes =
|
||||
<RPMH_REGULATOR_MODE_LPM
|
||||
RPMH_REGULATOR_MODE_HPM>;
|
||||
qcom,mode-threshold-currents = <0 1>;
|
||||
L2A: pm6150_l2: regulator-pm6150-l2 {
|
||||
regulator-name = "pm6150_l2";
|
||||
qcom,set = <RPMH_REGULATOR_SET_ALL>;
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
qcom,init-voltage = <1000000>;
|
||||
qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>;
|
||||
};
|
||||
};
|
||||
|
||||
rpmh-regulator-ldoa3 {
|
||||
compatible = "qcom,rpmh-vrm-regulator";
|
||||
qcom,resource-name = "ldoa3";
|
||||
qcom,regulator-type = "pmic5-ldo";
|
||||
qcom,supported-modes =
|
||||
<RPMH_REGULATOR_MODE_LPM
|
||||
RPMH_REGULATOR_MODE_HPM>;
|
||||
qcom,mode-threshold-currents = <0 1>;
|
||||
L3A: pm6150_l3: regulator-pm6150-l3 {
|
||||
regulator-name = "pm6150_l3";
|
||||
qcom,set = <RPMH_REGULATOR_SET_ALL>;
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1060000>;
|
||||
qcom,init-voltage = <1000000>;
|
||||
qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>;
|
||||
};
|
||||
};
|
||||
|
||||
rpmh-regulator-ldoa4 {
|
||||
compatible = "qcom,rpmh-vrm-regulator";
|
||||
qcom,resource-name = "ldoa4";
|
||||
qcom,regulator-type = "pmic5-ldo";
|
||||
qcom,supported-modes =
|
||||
<RPMH_REGULATOR_MODE_LPM
|
||||
RPMH_REGULATOR_MODE_HPM>;
|
||||
qcom,mode-threshold-currents = <0 1>;
|
||||
proxy-supply = <&pm6150_l4>;
|
||||
L4A: pm6150_l4: regulator-pm6150-l4 {
|
||||
regulator-name = "pm6150_l4";
|
||||
qcom,set = <RPMH_REGULATOR_SET_ALL>;
|
||||
regulator-min-microvolt = <875000>;
|
||||
regulator-max-microvolt = <975000>;
|
||||
qcom,init-voltage = <875000>;
|
||||
qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>;
|
||||
qcom,proxy-consumer-enable;
|
||||
qcom,proxy-consumer-current = <23800>;
|
||||
};
|
||||
};
|
||||
|
||||
rpmh-regulator-ldoa5 {
|
||||
compatible = "qcom,rpmh-vrm-regulator";
|
||||
qcom,resource-name = "ldoa5";
|
||||
qcom,regulator-type = "pmic5-ldo";
|
||||
qcom,supported-modes =
|
||||
<RPMH_REGULATOR_MODE_LPM
|
||||
RPMH_REGULATOR_MODE_HPM>;
|
||||
qcom,mode-threshold-currents = <0 1>;
|
||||
L5A: pm6150_l5: regulator-pm6150-l5 {
|
||||
regulator-name = "pm6150_l5";
|
||||
qcom,set = <RPMH_REGULATOR_SET_ALL>;
|
||||
regulator-min-microvolt = <2500000>;
|
||||
regulator-max-microvolt = <2970000>;
|
||||
qcom,init-voltage = <2500000>;
|
||||
qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>;
|
||||
};
|
||||
};
|
||||
|
||||
rpmh-regulator-ldoa6 {
|
||||
compatible = "qcom,rpmh-vrm-regulator";
|
||||
qcom,resource-name = "ldoa6";
|
||||
qcom,regulator-type = "pmic5-ldo";
|
||||
qcom,supported-modes =
|
||||
<RPMH_REGULATOR_MODE_LPM
|
||||
RPMH_REGULATOR_MODE_HPM>;
|
||||
qcom,mode-threshold-currents = <0 1>;
|
||||
L6A: pm6150_l6: regulator-pm6150-l6 {
|
||||
regulator-name = "pm6150_l6";
|
||||
qcom,set = <RPMH_REGULATOR_SET_ALL>;
|
||||
regulator-min-microvolt = <600000>;
|
||||
regulator-max-microvolt = <650000>;
|
||||
qcom,init-voltage = <600000>;
|
||||
qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>;
|
||||
};
|
||||
};
|
||||
|
||||
/* pm6150 L7 - LPI_MX supply */
|
||||
rpmh-regulator-lmxlvl {
|
||||
compatible = "qcom,rpmh-arc-regulator";
|
||||
qcom,resource-name = "lmx.lvl";
|
||||
L7A_LEVEL: pm6150_l7_level: regulator-pm6150-l7 {
|
||||
regulator-name = "pm6150_l7_level";
|
||||
qcom,set = <RPMH_REGULATOR_SET_ALL>;
|
||||
regulator-min-microvolt =
|
||||
<RPMH_REGULATOR_LEVEL_RETENTION>;
|
||||
regulator-max-microvolt =
|
||||
<RPMH_REGULATOR_LEVEL_MAX>;
|
||||
qcom,init-voltage-level =
|
||||
<RPMH_REGULATOR_LEVEL_RETENTION>;
|
||||
};
|
||||
};
|
||||
|
||||
/* pm6150 L8 - LPI_CX supply */
|
||||
rpmh-regulator-lcxlvl {
|
||||
compatible = "qcom,rpmh-arc-regulator";
|
||||
qcom,resource-name = "lcx.lvl";
|
||||
L8A_LEVEL: pm6150_l8_level: regulator-pm6150-l8 {
|
||||
regulator-name = "pm6150_l8_level";
|
||||
qcom,set = <RPMH_REGULATOR_SET_ALL>;
|
||||
regulator-min-microvolt =
|
||||
<RPMH_REGULATOR_LEVEL_RETENTION>;
|
||||
regulator-max-microvolt =
|
||||
<RPMH_REGULATOR_LEVEL_MAX>;
|
||||
qcom,init-voltage-level =
|
||||
<RPMH_REGULATOR_LEVEL_RETENTION>;
|
||||
};
|
||||
};
|
||||
|
||||
/* pm6150 L9 - WCSS_CX supply */
|
||||
rpmh-regulator-ldoa9 {
|
||||
compatible = "qcom,rpmh-vrm-regulator";
|
||||
qcom,resource-name = "ldoa9";
|
||||
qcom,regulator-type = "pmic5-ldo";
|
||||
qcom,supported-modes =
|
||||
<RPMH_REGULATOR_MODE_LPM
|
||||
RPMH_REGULATOR_MODE_HPM>;
|
||||
qcom,mode-threshold-currents = <0 1>;
|
||||
L9A: pm6150_l9: regulator-pm6150-l9 {
|
||||
regulator-name = "pm6150_l9";
|
||||
qcom,set = <RPMH_REGULATOR_SET_ALL>;
|
||||
regulator-min-microvolt = <400000>;
|
||||
regulator-max-microvolt = <728000>;
|
||||
qcom,init-voltage = <400000>;
|
||||
qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>;
|
||||
};
|
||||
};
|
||||
|
||||
rpmh-regulator-ldoa10 {
|
||||
compatible = "qcom,rpmh-vrm-regulator";
|
||||
qcom,resource-name = "ldoa10";
|
||||
qcom,regulator-type = "pmic5-ldo";
|
||||
qcom,supported-modes =
|
||||
<RPMH_REGULATOR_MODE_LPM
|
||||
RPMH_REGULATOR_MODE_HPM>;
|
||||
qcom,mode-threshold-currents = <0 1>;
|
||||
L10A: pm6150_l10: regulator-pm6150-l10 {
|
||||
regulator-name = "pm6150_l10";
|
||||
qcom,set = <RPMH_REGULATOR_SET_ALL>;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1829000>;
|
||||
qcom,init-voltage = <1800000>;
|
||||
qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>;
|
||||
};
|
||||
};
|
||||
|
||||
rpmh-regulator-ldoa11 {
|
||||
compatible = "qcom,rpmh-vrm-regulator";
|
||||
qcom,resource-name = "ldoa11";
|
||||
qcom,regulator-type = "pmic5-ldo";
|
||||
qcom,supported-modes =
|
||||
<RPMH_REGULATOR_MODE_LPM
|
||||
RPMH_REGULATOR_MODE_HPM>;
|
||||
qcom,mode-threshold-currents = <0 1>;
|
||||
L11A: pm6150_l11: regulator-pm6150-l11 {
|
||||
regulator-name = "pm6150_l11";
|
||||
qcom,set = <RPMH_REGULATOR_SET_ALL>;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1890000>;
|
||||
qcom,init-voltage = <1800000>;
|
||||
qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>;
|
||||
};
|
||||
};
|
||||
|
||||
rpmh-regulator-ldoa12 {
|
||||
compatible = "qcom,rpmh-vrm-regulator";
|
||||
qcom,resource-name = "ldoa12";
|
||||
qcom,regulator-type = "pmic5-ldo";
|
||||
qcom,supported-modes =
|
||||
<RPMH_REGULATOR_MODE_LPM
|
||||
RPMH_REGULATOR_MODE_HPM>;
|
||||
qcom,mode-threshold-currents = <0 1>;
|
||||
L12A: pm6150_l12: regulator-pm6150-l12 {
|
||||
regulator-name = "pm6150_l12";
|
||||
qcom,set = <RPMH_REGULATOR_SET_ALL>;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1950000>;
|
||||
qcom,init-voltage = <1800000>;
|
||||
qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>;
|
||||
};
|
||||
};
|
||||
|
||||
rpmh-regulator-ldoa13 {
|
||||
compatible = "qcom,rpmh-vrm-regulator";
|
||||
qcom,resource-name = "ldoa13";
|
||||
qcom,regulator-type = "pmic5-ldo";
|
||||
qcom,supported-modes =
|
||||
<RPMH_REGULATOR_MODE_LPM
|
||||
RPMH_REGULATOR_MODE_HPM>;
|
||||
qcom,mode-threshold-currents = <0 1>;
|
||||
proxy-supply = <&pm6150_l13>;
|
||||
L13A: pm6150_l13: regulator-pm6150-l13 {
|
||||
regulator-name = "pm6150_l13";
|
||||
qcom,set = <RPMH_REGULATOR_SET_ALL>;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1900000>;
|
||||
qcom,init-voltage = <1800000>;
|
||||
qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>;
|
||||
qcom,proxy-consumer-enable;
|
||||
qcom,proxy-consumer-current = <115000>;
|
||||
};
|
||||
};
|
||||
|
||||
rpmh-regulator-ldoa14 {
|
||||
compatible = "qcom,rpmh-vrm-regulator";
|
||||
qcom,resource-name = "ldoa14";
|
||||
qcom,regulator-type = "pmic5-ldo";
|
||||
qcom,supported-modes =
|
||||
<RPMH_REGULATOR_MODE_LPM
|
||||
RPMH_REGULATOR_MODE_HPM>;
|
||||
qcom,mode-threshold-currents = <0 1>;
|
||||
L14A: pm6150_l14: regulator-pm6150-l14 {
|
||||
regulator-name = "pm6150_l14";
|
||||
qcom,set = <RPMH_REGULATOR_SET_ALL>;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1850000>;
|
||||
qcom,init-voltage = <1800000>;
|
||||
regulator-always-on;
|
||||
qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>;
|
||||
};
|
||||
};
|
||||
|
||||
rpmh-regulator-ldoa15 {
|
||||
compatible = "qcom,rpmh-vrm-regulator";
|
||||
qcom,resource-name = "ldoa15";
|
||||
qcom,regulator-type = "pmic5-ldo";
|
||||
qcom,supported-modes =
|
||||
<RPMH_REGULATOR_MODE_LPM
|
||||
RPMH_REGULATOR_MODE_HPM>;
|
||||
qcom,mode-threshold-currents = <0 1>;
|
||||
L15A: pm6150_l15: regulator-pm6150-l15 {
|
||||
regulator-name = "pm6150_l15";
|
||||
qcom,set = <RPMH_REGULATOR_SET_ALL>;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1900000>;
|
||||
qcom,init-voltage = <1800000>;
|
||||
regulator-always-on;
|
||||
qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>;
|
||||
};
|
||||
};
|
||||
|
||||
rpmh-regulator-ldoa16 {
|
||||
compatible = "qcom,rpmh-vrm-regulator";
|
||||
qcom,resource-name = "ldoa16";
|
||||
qcom,regulator-type = "pmic5-ldo";
|
||||
qcom,supported-modes =
|
||||
<RPMH_REGULATOR_MODE_LPM
|
||||
RPMH_REGULATOR_MODE_HPM>;
|
||||
qcom,mode-threshold-currents = <0 1>;
|
||||
L16A: pm6150_l16: regulator-pm6150-l16 {
|
||||
regulator-name = "pm6150_l16";
|
||||
qcom,set = <RPMH_REGULATOR_SET_ALL>;
|
||||
regulator-min-microvolt = <2430000>;
|
||||
regulator-max-microvolt = <2970000>;
|
||||
qcom,init-voltage = <2430000>;
|
||||
qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>;
|
||||
};
|
||||
};
|
||||
|
||||
rpmh-regulator-ldoa17 {
|
||||
compatible = "qcom,rpmh-vrm-regulator";
|
||||
qcom,resource-name = "ldoa17";
|
||||
qcom,regulator-type = "pmic5-ldo";
|
||||
qcom,supported-modes =
|
||||
<RPMH_REGULATOR_MODE_LPM
|
||||
RPMH_REGULATOR_MODE_HPM>;
|
||||
qcom,mode-threshold-currents = <0 1>;
|
||||
L17A: pm6150_l17: regulator-pm6150-l17 {
|
||||
regulator-name = "pm6150_l17";
|
||||
qcom,set = <RPMH_REGULATOR_SET_ALL>;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3230000>;
|
||||
qcom,init-voltage = <3000000>;
|
||||
qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>;
|
||||
};
|
||||
};
|
||||
|
||||
rpmh-regulator-ldoa18 {
|
||||
compatible = "qcom,rpmh-vrm-regulator";
|
||||
qcom,resource-name = "ldoa18";
|
||||
qcom,regulator-type = "pmic5-ldo";
|
||||
qcom,supported-modes =
|
||||
<RPMH_REGULATOR_MODE_LPM
|
||||
RPMH_REGULATOR_MODE_HPM>;
|
||||
qcom,mode-threshold-currents = <0 1>;
|
||||
L18A: pm6150_l18: regulator-pm6150-l18 {
|
||||
regulator-name = "pm6150_l18";
|
||||
qcom,set = <RPMH_REGULATOR_SET_ALL>;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3008000>;
|
||||
qcom,init-voltage = <3000000>;
|
||||
qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>;
|
||||
};
|
||||
};
|
||||
|
||||
rpmh-regulator-ldoa19 {
|
||||
compatible = "qcom,rpmh-vrm-regulator";
|
||||
qcom,resource-name = "ldoa19";
|
||||
qcom,regulator-type = "pmic5-ldo";
|
||||
qcom,supported-modes =
|
||||
<RPMH_REGULATOR_MODE_LPM
|
||||
RPMH_REGULATOR_MODE_HPM>;
|
||||
qcom,mode-threshold-currents = <0 1>;
|
||||
L19A: pm6150_l19: regulator-pm6150-l19 {
|
||||
regulator-name = "pm6150_l19";
|
||||
qcom,set = <RPMH_REGULATOR_SET_ALL>;
|
||||
regulator-min-microvolt = <2700000>;
|
||||
regulator-max-microvolt = <3008000>;
|
||||
qcom,init-voltage = <2700000>;
|
||||
qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>;
|
||||
};
|
||||
};
|
||||
|
||||
rpmh-regulator-ldoc1 {
|
||||
compatible = "qcom,rpmh-vrm-regulator";
|
||||
qcom,resource-name = "ldoc1";
|
||||
qcom,regulator-type = "pmic5-ldo";
|
||||
qcom,supported-modes =
|
||||
<RPMH_REGULATOR_MODE_LPM
|
||||
RPMH_REGULATOR_MODE_HPM>;
|
||||
qcom,mode-threshold-currents = <0 10000>;
|
||||
L1C: pm6150l_l1: regulator-pm6150l-l1 {
|
||||
regulator-name = "pm6150l_l1";
|
||||
qcom,set = <RPMH_REGULATOR_SET_ALL>;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1900000>;
|
||||
qcom,init-voltage = <1800000>;
|
||||
qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>;
|
||||
};
|
||||
};
|
||||
|
||||
rpmh-regulator-ldoc2 {
|
||||
compatible = "qcom,rpmh-vrm-regulator";
|
||||
qcom,resource-name = "ldoc2";
|
||||
qcom,regulator-type = "pmic5-ldo";
|
||||
qcom,supported-modes =
|
||||
<RPMH_REGULATOR_MODE_LPM
|
||||
RPMH_REGULATOR_MODE_HPM>;
|
||||
qcom,mode-threshold-currents = <0 10000>;
|
||||
L2C: pm6150l_l2: regulator-pm6150l-l2 {
|
||||
regulator-name = "pm6150l_l2";
|
||||
qcom,set = <RPMH_REGULATOR_SET_ALL>;
|
||||
regulator-min-microvolt = <1304000>;
|
||||
regulator-max-microvolt = <1304000>;
|
||||
qcom,init-voltage = <1304000>;
|
||||
qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>;
|
||||
};
|
||||
};
|
||||
|
||||
rpmh-regulator-ldoc3 {
|
||||
compatible = "qcom,rpmh-vrm-regulator";
|
||||
qcom,resource-name = "ldoc3";
|
||||
qcom,regulator-type = "pmic5-ldo";
|
||||
qcom,supported-modes =
|
||||
<RPMH_REGULATOR_MODE_LPM
|
||||
RPMH_REGULATOR_MODE_HPM>;
|
||||
qcom,mode-threshold-currents = <0 1>;
|
||||
proxy-supply = <&pm6150l_l3>;
|
||||
L3C: pm6150l_l3: regulator-pm6150l-l3 {
|
||||
regulator-name = "pm6150l_l3";
|
||||
qcom,set = <RPMH_REGULATOR_SET_ALL>;
|
||||
regulator-min-microvolt = <1232000>;
|
||||
regulator-max-microvolt = <1260000>;
|
||||
qcom,init-voltage = <1232000>;
|
||||
qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>;
|
||||
qcom,proxy-consumer-enable;
|
||||
qcom,proxy-consumer-current = <51800>;
|
||||
};
|
||||
};
|
||||
|
||||
rpmh-regulator-ldoc4 {
|
||||
compatible = "qcom,rpmh-vrm-regulator";
|
||||
qcom,resource-name = "ldoc4";
|
||||
qcom,regulator-type = "pmic5-ldo";
|
||||
qcom,supported-modes =
|
||||
<RPMH_REGULATOR_MODE_LPM
|
||||
RPMH_REGULATOR_MODE_HPM>;
|
||||
qcom,mode-threshold-currents = <0 1>;
|
||||
L4C: pm6150l_l4: regulator-pm6150l-l4 {
|
||||
regulator-name = "pm6150l_l4";
|
||||
qcom,set = <RPMH_REGULATOR_SET_ALL>;
|
||||
regulator-min-microvolt = <1650000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
qcom,init-voltage = <1650000>;
|
||||
qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>;
|
||||
};
|
||||
};
|
||||
|
||||
rpmh-regulator-ldoc5 {
|
||||
compatible = "qcom,rpmh-vrm-regulator";
|
||||
qcom,resource-name = "ldoc5";
|
||||
qcom,regulator-type = "pmic5-ldo";
|
||||
qcom,supported-modes =
|
||||
<RPMH_REGULATOR_MODE_LPM
|
||||
RPMH_REGULATOR_MODE_HPM>;
|
||||
qcom,mode-threshold-currents = <0 1>;
|
||||
L5C: pm6150l_l5: regulator-pm6150l-l5 {
|
||||
regulator-name = "pm6150l_l5";
|
||||
qcom,set = <RPMH_REGULATOR_SET_ALL>;
|
||||
regulator-min-microvolt = <1650000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
qcom,init-voltage = <1650000>;
|
||||
qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>;
|
||||
};
|
||||
};
|
||||
|
||||
rpmh-regulator-ldoc6 {
|
||||
compatible = "qcom,rpmh-vrm-regulator";
|
||||
qcom,resource-name = "ldoc6";
|
||||
qcom,regulator-type = "pmic5-ldo";
|
||||
qcom,supported-modes =
|
||||
<RPMH_REGULATOR_MODE_LPM
|
||||
RPMH_REGULATOR_MODE_HPM>;
|
||||
qcom,mode-threshold-currents = <0 1>;
|
||||
L6C: pm6150l_l6: regulator-pm6150l-l6 {
|
||||
regulator-name = "pm6150l_l6";
|
||||
qcom,set = <RPMH_REGULATOR_SET_ALL>;
|
||||
regulator-min-microvolt = <1650000>;
|
||||
regulator-max-microvolt = <3100000>;
|
||||
qcom,init-voltage = <1650000>;
|
||||
qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>;
|
||||
};
|
||||
};
|
||||
|
||||
rpmh-regulator-ldoc7 {
|
||||
compatible = "qcom,rpmh-vrm-regulator";
|
||||
qcom,resource-name = "ldoc7";
|
||||
qcom,regulator-type = "pmic5-ldo";
|
||||
qcom,supported-modes =
|
||||
<RPMH_REGULATOR_MODE_LPM
|
||||
RPMH_REGULATOR_MODE_HPM>;
|
||||
qcom,mode-threshold-currents = <0 1>;
|
||||
L7C: pm6150l_l7: regulator-pm6150l-l7 {
|
||||
regulator-name = "pm6150l_l7";
|
||||
qcom,set = <RPMH_REGULATOR_SET_ALL>;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3312000>;
|
||||
qcom,init-voltage = <3000000>;
|
||||
qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>;
|
||||
};
|
||||
};
|
||||
|
||||
rpmh-regulator-ldoc8 {
|
||||
compatible = "qcom,rpmh-vrm-regulator";
|
||||
qcom,resource-name = "ldoc8";
|
||||
qcom,regulator-type = "pmic5-ldo";
|
||||
qcom,supported-modes =
|
||||
<RPMH_REGULATOR_MODE_LPM
|
||||
RPMH_REGULATOR_MODE_HPM>;
|
||||
qcom,mode-threshold-currents = <0 1>;
|
||||
L8C: pm6150l_l8: regulator-pm6150l-l8 {
|
||||
regulator-name = "pm6150l_l8";
|
||||
qcom,set = <RPMH_REGULATOR_SET_ALL>;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1900000>;
|
||||
qcom,init-voltage = <1800000>;
|
||||
qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>;
|
||||
};
|
||||
};
|
||||
|
||||
rpmh-regulator-ldoc9 {
|
||||
compatible = "qcom,rpmh-vrm-regulator";
|
||||
qcom,resource-name = "ldoc9";
|
||||
qcom,regulator-type = "pmic5-ldo";
|
||||
qcom,supported-modes =
|
||||
<RPMH_REGULATOR_MODE_LPM
|
||||
RPMH_REGULATOR_MODE_HPM>;
|
||||
qcom,mode-threshold-currents = <0 1>;
|
||||
L9C: pm6150l_l9: regulator-pm6150l-l9 {
|
||||
regulator-name = "pm6150l_l9";
|
||||
qcom,set = <RPMH_REGULATOR_SET_ALL>;
|
||||
regulator-min-microvolt = <2950000>;
|
||||
regulator-max-microvolt = <3312000>;
|
||||
qcom,init-voltage = <2950000>;
|
||||
qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>;
|
||||
};
|
||||
};
|
||||
|
||||
rpmh-regulator-ldoc10 {
|
||||
compatible = "qcom,rpmh-vrm-regulator";
|
||||
qcom,resource-name = "ldoc10";
|
||||
qcom,regulator-type = "pmic5-ldo";
|
||||
qcom,supported-modes =
|
||||
<RPMH_REGULATOR_MODE_LPM
|
||||
RPMH_REGULATOR_MODE_HPM>;
|
||||
qcom,mode-threshold-currents = <0 10000>;
|
||||
L10C: pm6150l_l10: regulator-pm6150l-l10 {
|
||||
regulator-name = "pm6150l_l10";
|
||||
qcom,set = <RPMH_REGULATOR_SET_ALL>;
|
||||
regulator-min-microvolt = <3200000>;
|
||||
regulator-max-microvolt = <3312000>;
|
||||
qcom,init-voltage = <3200000>;
|
||||
qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>;
|
||||
};
|
||||
};
|
||||
|
||||
rpmh-regulator-ldoc11 {
|
||||
compatible = "qcom,rpmh-vrm-regulator";
|
||||
qcom,resource-name = "ldoc11";
|
||||
qcom,regulator-type = "pmic5-ldo";
|
||||
qcom,supported-modes =
|
||||
<RPMH_REGULATOR_MODE_LPM
|
||||
RPMH_REGULATOR_MODE_HPM>;
|
||||
qcom,mode-threshold-currents = <0 1>;
|
||||
L11C: pm6150l_l11: regulator-pm6150l-l11 {
|
||||
regulator-name = "pm6150l_l11";
|
||||
qcom,set = <RPMH_REGULATOR_SET_ALL>;
|
||||
regulator-min-microvolt = <2950000>;
|
||||
regulator-max-microvolt = <3312000>;
|
||||
qcom,init-voltage = <2950000>;
|
||||
qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>;
|
||||
};
|
||||
};
|
||||
|
||||
rpmh-regulator-bobc1 {
|
||||
compatible = "qcom,rpmh-vrm-regulator";
|
||||
qcom,resource-name = "bobc1";
|
||||
qcom,regulator-type = "pmic5-bob";
|
||||
qcom,supported-modes =
|
||||
<RPMH_REGULATOR_MODE_PASS
|
||||
RPMH_REGULATOR_MODE_LPM
|
||||
RPMH_REGULATOR_MODE_HPM>;
|
||||
qcom,mode-threshold-currents = <0 1000000 2000000>;
|
||||
qcom,send-defaults;
|
||||
|
||||
BOB: pm6150l_bob: regulator-pm6150l-bob {
|
||||
regulator-name = "pm6150l_bob";
|
||||
qcom,set = <RPMH_REGULATOR_SET_ALL>;
|
||||
regulator-min-microvolt = <3296000>;
|
||||
regulator-max-microvolt = <3960000>;
|
||||
qcom,init-voltage = <3296000>;
|
||||
qcom,init-mode = <RPMH_REGULATOR_MODE_PASS>;
|
||||
};
|
||||
|
||||
BOB_AO: pm6150l_bob_ao: regulator-pm6150l-bob-ao {
|
||||
regulator-name = "pm6150l_bob_ao";
|
||||
qcom,set = <RPMH_REGULATOR_SET_ACTIVE>;
|
||||
regulator-min-microvolt = <3296000>;
|
||||
regulator-max-microvolt = <3960000>;
|
||||
qcom,init-voltage = <3296000>;
|
||||
qcom,init-mode = <RPMH_REGULATOR_MODE_AUTO>;
|
||||
};
|
||||
};
|
||||
};
|
||||
@@ -5,6 +5,7 @@
|
||||
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
|
||||
#include <dt-bindings/regulator/qcom,rpmh-regulator-levels.h>
|
||||
|
||||
/ {
|
||||
model = "Qualcomm Technologies, Inc. SM6150";
|
||||
@@ -566,3 +567,5 @@
|
||||
"l3-scu-faultirq";
|
||||
};
|
||||
};
|
||||
|
||||
#include "sm6150-regulator.dtsi"
|
||||
|
||||
@@ -1,6 +1,6 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) 2023-2024 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
* Copyright (c) 2023-2025 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/regulator/qcom,rpmh-regulator-levels.h>
|
||||
@@ -1489,4 +1489,16 @@
|
||||
qcom,init-voltage = <3304000>;
|
||||
};
|
||||
};
|
||||
|
||||
rpmh-regulator-vrm-wcal {
|
||||
compatible = "qcom,rpmh-pbs-regulator";
|
||||
qcom,resource-name = "vrm.wcal";
|
||||
|
||||
WCAL_PBS:
|
||||
pmk8550_wcal_pbs: regulator-pmk8550-wcal-pbs {
|
||||
regulator-name = "pmk8550_wcal_pbs";
|
||||
qcom,set = <RPMH_REGULATOR_SET_ALL>;
|
||||
};
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
@@ -1367,4 +1367,15 @@
|
||||
qcom,init-voltage = <3304000>;
|
||||
};
|
||||
};
|
||||
|
||||
rpmh-regulator-vrm-wcal {
|
||||
compatible = "qcom,rpmh-pbs-regulator";
|
||||
qcom,resource-name = "vrm.wcal";
|
||||
|
||||
WCAL_PBS:
|
||||
pmk8550_wcal_pbs: regulator-pmk8550-wcal-pbs {
|
||||
regulator-name = "pmk8550_wcal_pbs";
|
||||
qcom,set = <RPMH_REGULATOR_SET_ALL>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
Reference in New Issue
Block a user