ARM: dts: msm: move hdk platform dtsi files to opensoure
Move HDK platform dtsi files to appropriate project and adding required licensing. CRs-Fixed: 3599138 Change-Id: I35172180a9ce45cdc74b46fd3a181a5a5664f6e7 Signed-off-by: Atiya Kailany <quic_akailany@quicinc.com>
This commit is contained in:
Atiya Kailany
committed by
Camera Software Integration
Camera Software Integration
parent
60777a40a3
commit
98659863ab
@@ -2,4 +2,5 @@ dtbo-$(CONFIG_ARCH_PINEAPPLE) := pineapple-camera.dtbo
|
||||
dtbo-$(CONFIG_ARCH_PINEAPPLE) += pineapple-camera-v2.dtbo \
|
||||
pineapple-camera-sensor-cdp.dtbo \
|
||||
pineapple-camera-sensor-mtp.dtbo \
|
||||
pineapple-camera-sensor-hdk.dtbo \
|
||||
pineapple-camera-sensor-qrd.dtbo
|
||||
|
||||
21
pineapple-camera-sensor-hdk.dts
Normal file
21
pineapple-camera-sensor-hdk.dts
Normal file
@@ -0,0 +1,21 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/plugin/;
|
||||
|
||||
#include <dt-bindings/clock/qcom,gcc-pineapple.h>
|
||||
#include <dt-bindings/clock/qcom,camcc-pineapple.h>
|
||||
#include <dt-bindings/interconnect/qcom,pineapple.h>
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include <dt-bindings/regulator/qcom,rpmh-regulator-levels.h>
|
||||
|
||||
#include "pineapple-camera-sensor-hdk.dtsi"
|
||||
/ {
|
||||
model = "Qualcomm Technologies, Inc. Pineapple HDK";
|
||||
compatible = "qcom,pineapple-hdk", "qcom,pineapple", "qcom,hdk";
|
||||
qcom,msm-id = <577 0x10000>, <577 0x20000>;
|
||||
qcom,board-id = <0x1f 0>;
|
||||
};
|
||||
765
pineapple-camera-sensor-hdk.dtsi
Normal file
765
pineapple-camera-sensor-hdk.dtsi
Normal file
@@ -0,0 +1,765 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/msm-camera.h>
|
||||
&soc {
|
||||
led_flash_triple_rear_wide: qcom,camera-flash1 {
|
||||
cell-index = <1>;
|
||||
compatible = "qcom,camera-flash";
|
||||
flash-source = <&pm8550_flash0 &pm8550_flash1>;
|
||||
torch-source = <&pm8550_torch0 &pm8550_torch1>;
|
||||
switch-source = <&pm8550_switch2>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
led_flash_triple_rear_tele: qcom,camera-flash2 {
|
||||
cell-index = <2>;
|
||||
compatible = "qcom,camera-flash";
|
||||
flash-source = <&pm8550_flash0 &pm8550_flash1>;
|
||||
torch-source = <&pm8550_torch0 &pm8550_torch1>;
|
||||
switch-source = <&pm8550_switch2>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
led_flash_triple_rear_ultrawide: qcom,camera-flash3 {
|
||||
cell-index = <3>;
|
||||
compatible = "qcom,camera-flash";
|
||||
flash-source = <&pm8550_flash0 &pm8550_flash1>;
|
||||
torch-source = <&pm8550_torch0 &pm8550_torch1>;
|
||||
switch-source = <&pm8550_switch2>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
led_flash_aon_rear: qcom,camera-flash4 {
|
||||
cell-index = <4>;
|
||||
compatible = "qcom,camera-flash";
|
||||
flash-source = <&pm8550_flash0 &pm8550_flash1>;
|
||||
torch-source = <&pm8550_torch0 &pm8550_torch1>;
|
||||
switch-source = <&pm8550_switch2>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
qcom,cam-res-mgr {
|
||||
compatible = "qcom,cam-res-mgr";
|
||||
status = "ok";
|
||||
};
|
||||
};
|
||||
|
||||
&cam_cci0 {
|
||||
|
||||
actuator_triple_wide: qcom,actuator2 {
|
||||
cell-index = <2>;
|
||||
compatible = "qcom,actuator";
|
||||
cci-master = <CCI_MASTER_1>;
|
||||
cam_vaf-supply = <&L7M>;
|
||||
regulator-names = "cam_vaf";
|
||||
rgltr-cntrl-support;
|
||||
rgltr-min-voltage = <2960000>;
|
||||
rgltr-max-voltage = <2960000>;
|
||||
rgltr-load-current = <119000>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
ois_wide: qcom,ois0 {
|
||||
cell-index = <2>;
|
||||
compatible = "qcom,ois";
|
||||
cci-master = <CCI_MASTER_1>;
|
||||
cam_vio-supply = <&L3N>;
|
||||
cam_vaf-supply = <&L7M>;
|
||||
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
|
||||
regulator-names = "cam_vio","cam_vaf", "cam_clk";
|
||||
rgltr-cntrl-support;
|
||||
rgltr-min-voltage = <1800000 2960000 0>;
|
||||
rgltr-max-voltage = <1800000 2960000 0>;
|
||||
rgltr-load-current = <4000 119000 0>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
eeprom_tof1: qcom,eeprom7 {
|
||||
cell-index = <7>;
|
||||
compatible = "qcom,eeprom";
|
||||
cam_vio-supply = <&L3N>;
|
||||
cam_vdig-supply = <&S1C>;
|
||||
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
|
||||
cam_vana-supply = <&L6N>;
|
||||
cam_v_custom1-supply = <&L7N>;
|
||||
cam_v_custom2-supply = <&DBO3>;
|
||||
regulator-names = "cam_vio", "cam_vdig",
|
||||
"cam_clk", "cam_vana", "cam_v_custom1", "cam_v_custom2";
|
||||
rgltr-cntrl-support;
|
||||
rgltr-min-voltage = <1800000 1200000 0 2800000 3304000 3600000>;
|
||||
rgltr-max-voltage = <1800000 1352000 0 2800000 3304000 3600000>;
|
||||
rgltr-load-current = <155000 680000 0 50000 30000 2500000>;
|
||||
gpio-no-mux = <0>;
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_sensor_mclk0_active
|
||||
&cam_sensor_active_rst0>;
|
||||
pinctrl-1 = <&cam_sensor_mclk0_suspend
|
||||
&cam_sensor_suspend_rst0>;
|
||||
gpios = <&tlmm 100 0>,
|
||||
<&tlmm 13 0>;
|
||||
gpio-reset = <1>;
|
||||
gpio-req-tbl-num = <0 1>;
|
||||
gpio-req-tbl-flags = <1 0>;
|
||||
gpio-req-tbl-label = "CAMIF_MCLK0",
|
||||
"CAM_RESET0";
|
||||
cci-master = <CCI_MASTER_0>;
|
||||
clocks = <&camcc CAM_CC_MCLK0_CLK>;
|
||||
clock-names = "cam_clk";
|
||||
clock-cntl-level = "nominal";
|
||||
clock-rates = <24000000>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
eeprom_wide: qcom,eeprom2 {
|
||||
cell-index = <2>;
|
||||
compatible = "qcom,eeprom";
|
||||
cam_vio-supply = <&L3N>;
|
||||
cam_vdig-supply = <&L1N>;
|
||||
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
|
||||
cam_vana-supply = <&L6M>;
|
||||
cam_vaf-supply = <&L7M>;
|
||||
cam_v_custom1-supply = <&L5M>;
|
||||
regulator-names = "cam_vio", "cam_vdig", "cam_clk", "cam_vana",
|
||||
"cam_vaf", "cam_v_custom1";
|
||||
rgltr-cntrl-support;
|
||||
rgltr-min-voltage = <1800000 1104000 0 2800000 2960000 1800000>;
|
||||
rgltr-max-voltage = <1800000 1104000 0 2800000 2960000 1800000>;
|
||||
rgltr-load-current = <4000 913000 0 91400 119000 63100>;
|
||||
gpio-no-mux = <0>;
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_sensor_mclk1_active
|
||||
&cam_sensor_active_rst1>;
|
||||
pinctrl-1 = <&cam_sensor_mclk1_suspend
|
||||
&cam_sensor_suspend_rst1>;
|
||||
gpios = <&tlmm 101 0>,
|
||||
<&tlmm 15 0>;
|
||||
gpio-reset = <1>;
|
||||
gpio-req-tbl-num = <0 1>;
|
||||
gpio-req-tbl-flags = <1 0>;
|
||||
gpio-req-tbl-label = "CAMIF_MCLK1",
|
||||
"CAM_RESET1";
|
||||
cci-master = <CCI_MASTER_1>;
|
||||
clocks = <&camcc CAM_CC_MCLK1_CLK>;
|
||||
clock-names = "cam_clk";
|
||||
clock-cntl-level = "nominal";
|
||||
clock-rates = <24000000>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
qcom,cam-sensor7 {
|
||||
cell-index = <7>;
|
||||
compatible = "qcom,cam-sensor";
|
||||
csiphy-sd-index = <0>;
|
||||
eeprom-src = <&eeprom_tof1>;
|
||||
sensor-position-roll = <270>;
|
||||
sensor-position-pitch = <0>;
|
||||
sensor-position-yaw = <180>;
|
||||
cam_vio-supply = <&L3N>;
|
||||
cam_vdig-supply = <&S1C>;
|
||||
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
|
||||
cam_vana-supply = <&L6N>;
|
||||
cam_v_custom1-supply = <&L7N>;
|
||||
cam_v_custom2-supply = <&DBO3>;
|
||||
regulator-names = "cam_vio", "cam_vdig",
|
||||
"cam_clk", "cam_vana", "cam_v_custom1", "cam_v_custom2";
|
||||
rgltr-cntrl-support;
|
||||
rgltr-min-voltage = <1800000 1200000 0 2800000 3304000 3600000>;
|
||||
rgltr-max-voltage = <1800000 1352000 0 2800000 3304000 3600000>;
|
||||
rgltr-load-current = <155000 680000 0 50000 30000 2500000>;
|
||||
gpio-no-mux = <0>;
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_sensor_mclk0_active
|
||||
&cam_sensor_active_rst0>;
|
||||
pinctrl-1 = <&cam_sensor_mclk0_suspend
|
||||
&cam_sensor_suspend_rst0>;
|
||||
gpios = <&tlmm 100 0>,
|
||||
<&tlmm 13 0>;
|
||||
gpio-reset = <1>;
|
||||
gpio-req-tbl-num = <0 1>;
|
||||
gpio-req-tbl-flags = <1 0>;
|
||||
gpio-req-tbl-label = "CAMIF_MCLK0",
|
||||
"CAM_RESET0";
|
||||
cci-master = <0>;
|
||||
clocks = <&camcc CAM_CC_MCLK0_CLK>;
|
||||
clock-names = "cam_clk";
|
||||
clock-cntl-level = "nominal";
|
||||
clock-rates = <24000000>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
qcom,cam-sensor2 {
|
||||
cell-index = <2>;
|
||||
compatible = "qcom,cam-sensor";
|
||||
csiphy-sd-index = <1>;
|
||||
sensor-position-roll = <270>;
|
||||
sensor-position-pitch = <0>;
|
||||
sensor-position-yaw = <180>;
|
||||
eeprom-src = <&eeprom_wide>;
|
||||
ois-src = <&ois_wide>;
|
||||
actuator-src = <&actuator_triple_wide>;
|
||||
led-flash-src = <&led_flash_triple_rear_wide>;
|
||||
cam_vio-supply = <&L3N>;
|
||||
cam_vdig-supply = <&L1N>;
|
||||
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
|
||||
cam_vana-supply = <&L6M>;
|
||||
cam_vaf-supply = <&L7M>;
|
||||
cam_v_custom1-supply = <&L5M>;
|
||||
regulator-names = "cam_vio", "cam_vdig", "cam_clk", "cam_vana",
|
||||
"cam_vaf", "cam_v_custom1";
|
||||
rgltr-cntrl-support;
|
||||
rgltr-min-voltage = <1800000 1104000 0 2800000 2960000 1800000>;
|
||||
rgltr-max-voltage = <1800000 1104000 0 2800000 2960000 1800000>;
|
||||
rgltr-load-current = <4000 913000 0 91400 119000 63100>;
|
||||
gpio-no-mux = <0>;
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_sensor_mclk1_active
|
||||
&cam_sensor_active_rst1>;
|
||||
pinctrl-1 = <&cam_sensor_mclk1_suspend
|
||||
&cam_sensor_suspend_rst1>;
|
||||
gpios = <&tlmm 101 0>,
|
||||
<&tlmm 15 0>;
|
||||
gpio-reset = <1>;
|
||||
gpio-req-tbl-num = <0 1>;
|
||||
gpio-req-tbl-flags = <1 0>;
|
||||
gpio-req-tbl-label = "CAMIF_MCLK1",
|
||||
"CAM_RESET1";
|
||||
cci-master = <CCI_MASTER_1>;
|
||||
clocks = <&camcc CAM_CC_MCLK1_CLK>;
|
||||
clock-names = "cam_clk";
|
||||
clock-cntl-level = "nominal";
|
||||
clock-rates = <24000000>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
&cam_cci1 {
|
||||
actuator_triple_tele: qcom,actuator3{
|
||||
cell-index = <3>;
|
||||
compatible = "qcom,actuator";
|
||||
cci-master = <CCI_MASTER_0>;
|
||||
cam_vaf-supply = <&L7M>;
|
||||
regulator-names = "cam_vaf";
|
||||
rgltr-cntrl-support;
|
||||
rgltr-min-voltage = <2960000>;
|
||||
rgltr-max-voltage = <2960000>;
|
||||
rgltr-load-current = <103000>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
eeprom_tele: qcom,eeprom3 {
|
||||
cell-index = <3>;
|
||||
compatible = "qcom,eeprom";
|
||||
cam_vio-supply = <&L3N>;
|
||||
cam_vdig-supply = <&L2M>;
|
||||
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
|
||||
cam_vana-supply = <&L4M>;
|
||||
cam_vaf-supply = <&L7M>;
|
||||
regulator-names = "cam_vio", "cam_vdig", "cam_clk",
|
||||
"cam_vana", "cam_vaf";
|
||||
rgltr-cntrl-support;
|
||||
rgltr-min-voltage = <1800000 1056000 0 2800000 2960000>;
|
||||
rgltr-max-voltage = <1800000 1056000 0 2800000 2960000>;
|
||||
rgltr-load-current = <4000 260700 0 67700 103000>;
|
||||
gpio-no-mux = <0>;
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_sensor_mclk3_active
|
||||
&cam_sensor_active_rst3>;
|
||||
pinctrl-1 = <&cam_sensor_mclk3_suspend
|
||||
&cam_sensor_suspend_rst3>;
|
||||
gpios = <&tlmm 103 0>,
|
||||
<&tlmm 109 0>;
|
||||
gpio-reset = <1>;
|
||||
gpio-req-tbl-num = <0 1>;
|
||||
gpio-req-tbl-flags = <1 0>;
|
||||
gpio-req-tbl-label = "CAMIF_MCLK3",
|
||||
"CAM_RESET3";
|
||||
cci-master = <CCI_MASTER_0>;
|
||||
clocks = <&camcc CAM_CC_MCLK3_CLK>;
|
||||
clock-names = "cam_clk";
|
||||
clock-cntl-level = "nominal";
|
||||
clock-rates = <24000000>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
qcom,cam-sensor3 {
|
||||
cell-index = <3>;
|
||||
compatible = "qcom,cam-sensor";
|
||||
csiphy-sd-index = <3>;
|
||||
sensor-position-roll = <270>;
|
||||
sensor-position-pitch = <0>;
|
||||
sensor-position-yaw = <180>;
|
||||
eeprom-src = <&eeprom_tele>;
|
||||
actuator-src = <&actuator_triple_tele>;
|
||||
led-flash-src = <&led_flash_triple_rear_tele>;
|
||||
cam_vio-supply = <&L3N>;
|
||||
cam_vdig-supply = <&L2M>;
|
||||
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
|
||||
cam_vana-supply = <&L4M>;
|
||||
cam_vaf-supply = <&L7M>;
|
||||
regulator-names = "cam_vio", "cam_vdig", "cam_clk",
|
||||
"cam_vana", "cam_vaf";
|
||||
rgltr-cntrl-support;
|
||||
rgltr-min-voltage = <1800000 1056000 0 2800000 2960000>;
|
||||
rgltr-max-voltage = <1800000 1056000 0 2800000 2960000>;
|
||||
rgltr-load-current = <4000 260700 0 67700 103000>;
|
||||
gpio-no-mux = <0>;
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_sensor_mclk3_active
|
||||
&cam_sensor_active_rst3>;
|
||||
pinctrl-1 = <&cam_sensor_mclk3_suspend
|
||||
&cam_sensor_suspend_rst3>;
|
||||
gpios = <&tlmm 103 0>,
|
||||
<&tlmm 109 0>;
|
||||
gpio-reset = <1>;
|
||||
gpio-req-tbl-num = <0 1>;
|
||||
gpio-req-tbl-flags = <1 0>;
|
||||
gpio-req-tbl-label = "CAMIF_MCLK3",
|
||||
"CAM_RESET3";
|
||||
cci-master = <CCI_MASTER_0>;
|
||||
clocks = <&camcc CAM_CC_MCLK3_CLK>;
|
||||
clock-names = "cam_clk";
|
||||
clock-cntl-level = "nominal";
|
||||
clock-rates = <24000000>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
&cam_cci2 {
|
||||
eeprom_tof2: qcom,eeprom5 {
|
||||
cell-index = <5>;
|
||||
compatible = "qcom,eeprom";
|
||||
cam_vio-supply = <&L3N>;
|
||||
cam_vdig-supply = <&S1C>;
|
||||
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
|
||||
cam_vana-supply = <&L6N>;
|
||||
cam_v_custom1-supply = <&L7N>;
|
||||
cam_v_custom2-supply = <&DBO3>;
|
||||
regulator-names = "cam_vio", "cam_vdig", "cam_clk", "cam_vana", "cam_v_custom1",
|
||||
"cam_v_custom2";
|
||||
rgltr-cntrl-support;
|
||||
rgltr-min-voltage = <1800000 1200000 0 2800000 3304000 3600000>;
|
||||
rgltr-max-voltage = <1800000 1352000 0 2800000 3304000 3600000>;
|
||||
rgltr-load-current = <155000 680000 0 50000 30000 2500000>;
|
||||
gpio-no-mux = <0>;
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_sensor_mclk5_active
|
||||
&cam_sensor_active_rst5>;
|
||||
pinctrl-1 = <&cam_sensor_mclk5_suspend
|
||||
&cam_sensor_suspend_rst5>;
|
||||
gpios = <&tlmm 105 0>,
|
||||
<&tlmm 110 0>;
|
||||
gpio-reset = <1>;
|
||||
gpio-req-tbl-num = <0 1>;
|
||||
gpio-req-tbl-flags = <1 0>;
|
||||
gpio-req-tbl-label = "CAMIF_MCLK5",
|
||||
"CAM_RESET5";
|
||||
cci-master = <CCI_MASTER_1>;
|
||||
clocks = <&camcc CAM_CC_MCLK5_CLK>;
|
||||
clock-names = "cam_clk";
|
||||
clock-cntl-level = "nominal";
|
||||
clock-rates = <24000000>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
qcom,cam-sensor5 {
|
||||
cell-index = <5>;
|
||||
compatible = "qcom,cam-sensor";
|
||||
csiphy-sd-index = <5>;
|
||||
sensor-position-roll = <90>;
|
||||
sensor-position-pitch = <0>;
|
||||
sensor-position-yaw = <180>;
|
||||
eeprom-src = <&eeprom_tof2>;
|
||||
cam_vio-supply = <&L3N>;
|
||||
cam_vdig-supply = <&S1C>;
|
||||
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
|
||||
cam_vana-supply = <&L6N>;
|
||||
cam_v_custom1-supply = <&L7N>;
|
||||
cam_v_custom2-supply = <&DBO3>;
|
||||
regulator-names = "cam_vio", "cam_vdig", "cam_clk", "cam_vana", "cam_v_custom1",
|
||||
"cam_v_custom2";
|
||||
rgltr-cntrl-support;
|
||||
rgltr-min-voltage = <1800000 1200000 0 2800000 3304000 3600000>;
|
||||
rgltr-max-voltage = <1800000 1352000 0 2800000 3304000 3600000>;
|
||||
rgltr-load-current = <155000 680000 0 50000 30000 2500000>;
|
||||
gpio-no-mux = <0>;
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_sensor_mclk5_active
|
||||
&cam_sensor_active_rst5>;
|
||||
pinctrl-1 = <&cam_sensor_mclk5_suspend
|
||||
&cam_sensor_suspend_rst5>;
|
||||
gpios = <&tlmm 105 0>,
|
||||
<&tlmm 110 0>;
|
||||
gpio-reset = <1>;
|
||||
gpio-req-tbl-num = <0 1>;
|
||||
gpio-req-tbl-flags = <1 0>;
|
||||
gpio-req-tbl-label = "CAMIF_MCLK5",
|
||||
"CAM_RESET5";
|
||||
cci-master = <CCI_MASTER_1>;
|
||||
clocks = <&camcc CAM_CC_MCLK5_CLK>;
|
||||
clock-names = "cam_clk";
|
||||
clock-cntl-level = "nominal";
|
||||
clock-rates = <24000000>;
|
||||
status = "ok";
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
&qupv3_se9_i2c {
|
||||
status = "ok";
|
||||
qcom,high-perf;
|
||||
qcom,clk-freq-out = <1000000>;
|
||||
qcom,pm-ctrl-client;
|
||||
|
||||
actuator_triple_uw: qcom,actuator1 {
|
||||
cell-index = <1>;
|
||||
reg = <0x0E>;
|
||||
compatible = "qcom,cam-i2c-actuator";
|
||||
cam_vaf-supply = <&L7M>;
|
||||
regulator-names = "cam_vaf";
|
||||
rgltr-cntrl-support;
|
||||
rgltr-min-voltage = <2960000>;
|
||||
rgltr-max-voltage = <2960000>;
|
||||
rgltr-load-current = <103000>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
eeprom_aon_front: qcom,eeprom4 {
|
||||
cell-index = <4>;
|
||||
reg = <0x50>;
|
||||
compatible = "qcom,cam-i2c-eeprom";
|
||||
cam_vio-supply = <&L3N>;
|
||||
cam_vdig-supply = <&L2N>;
|
||||
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
|
||||
cam_vana-supply = <&L5N>;
|
||||
cam_v_custom1-supply = <&L4N>;
|
||||
regulator-names = "cam_vio", "cam_vdig","cam_clk", "cam_vana",
|
||||
"cam_v_custom1";
|
||||
rgltr-cntrl-support;
|
||||
rgltr-min-voltage = <1800000 1056000 0 2800000 1800000>;
|
||||
rgltr-max-voltage = <1800000 1056000 0 2800000 1800000>;
|
||||
rgltr-load-current = <6000 454000 0 77900 29400>;
|
||||
gpio-no-mux = <0>;
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_sensor_mclk4_active
|
||||
&cam_sensor_active_rst4>;
|
||||
pinctrl-1 = <&cam_sensor_mclk4_suspend
|
||||
&cam_sensor_suspend_rst4>;
|
||||
gpios = <&tlmm 104 0>,
|
||||
<&tlmm 7 0>;
|
||||
gpio-reset = <1>;
|
||||
gpio-req-tbl-num = <0 1>;
|
||||
gpio-req-tbl-flags = <1 0>;
|
||||
gpio-req-tbl-label = "CAMIF_MCLK4",
|
||||
"CAM_RESET4";
|
||||
clocks = <&camcc CAM_CC_MCLK4_CLK>;
|
||||
clock-names = "cam_clk";
|
||||
clock-cntl-level = "nominal";
|
||||
clock-rates = <24000000>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
eeprom_triple_uw: qcom,eeprom1 {
|
||||
cell-index = <1>;
|
||||
reg = <0x51>;
|
||||
compatible = "qcom,cam-i2c-eeprom";
|
||||
cam_vio-supply = <&L3N>;
|
||||
cam_vdig-supply = <&L1M>;
|
||||
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
|
||||
cam_vana-supply = <&L3M>;
|
||||
cam_v_custom1-supply = <&L4N>;
|
||||
cam_vaf-supply = <&L7M>;
|
||||
regulator-names = "cam_vio", "cam_vdig","cam_clk", "cam_vana",
|
||||
"cam_v_custom1", "cam_vaf";
|
||||
rgltr-cntrl-support;
|
||||
rgltr-min-voltage = <1800000 1104000 0 2800000 1800000 2960000>;
|
||||
rgltr-max-voltage = <1800000 1104000 0 2800000 1800000 2960000>;
|
||||
rgltr-load-current = <6000 644000 0 77900 82900 103000>;
|
||||
gpio-no-mux = <0>;
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_sensor_mclk2_active
|
||||
&cam_sensor_active_rst2>;
|
||||
pinctrl-1 = <&cam_sensor_mclk2_suspend
|
||||
&cam_sensor_suspend_rst2>;
|
||||
gpios = <&tlmm 102 0>,
|
||||
<&tlmm 3 0>;
|
||||
gpio-reset = <1>;
|
||||
gpio-req-tbl-num = <0 1>;
|
||||
gpio-req-tbl-flags = <1 0>;
|
||||
gpio-req-tbl-label = "CAMIF_MCLK2",
|
||||
"CAM_RESET2";
|
||||
clocks = <&camcc CAM_CC_MCLK2_CLK>;
|
||||
clock-names = "cam_clk";
|
||||
clock-cntl-level = "nominal";
|
||||
clock-rates = <24000000>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
qcom,cam-sensor4 {
|
||||
cell-index = <4>;
|
||||
reg = <0x1A>;
|
||||
compatible = "qcom,cam-i2c-sensor";
|
||||
csiphy-sd-index = <4>;
|
||||
sensor-position-roll = <90>;
|
||||
sensor-position-pitch = <0>;
|
||||
sensor-position-yaw = <0>;
|
||||
eeprom-src = <&eeprom_aon_front>;
|
||||
cam_vio-supply = <&L3N>;
|
||||
cam_vdig-supply = <&L2N>;
|
||||
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
|
||||
cam_vana-supply = <&L5N>;
|
||||
cam_v_custom1-supply = <&L4N>;
|
||||
regulator-names = "cam_vio", "cam_vdig","cam_clk", "cam_vana",
|
||||
"cam_v_custom1";
|
||||
rgltr-cntrl-support;
|
||||
aon-camera-id = <AON_CAM1>;
|
||||
rgltr-min-voltage = <1800000 1056000 0 2800000 1800000>;
|
||||
rgltr-max-voltage = <1800000 1056000 0 2800000 1800000>;
|
||||
rgltr-load-current = <6000 454000 0 77900 29400>;
|
||||
gpio-no-mux = <0>;
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_sensor_mclk4_active
|
||||
&cam_sensor_active_rst4
|
||||
&cam_sensor_ponv_front_active>;
|
||||
pinctrl-1 = <&cam_sensor_mclk4_suspend
|
||||
&cam_sensor_suspend_rst4
|
||||
&cam_sensor_ponv_front_suspend>;
|
||||
gpios = <&tlmm 104 0>,
|
||||
<&tlmm 7 0>,
|
||||
<&tlmm 6 0>;
|
||||
gpio-reset = <1>;
|
||||
gpio-standby = <2>;
|
||||
gpio-req-tbl-num = <0 1 2>;
|
||||
gpio-req-tbl-flags = <1 0 0>;
|
||||
gpio-req-tbl-label = "CAMIF_MCLK4",
|
||||
"CAM_RESET4",
|
||||
"CAM_STANDBY";
|
||||
clocks = <&camcc CAM_CC_MCLK4_CLK>;
|
||||
clock-names = "cam_clk";
|
||||
clock-cntl-level = "nominal";
|
||||
clock-rates = <24000000>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
qcom,cam-sensor1 {
|
||||
cell-index = <1>;
|
||||
reg = <0x10>;
|
||||
compatible = "qcom,cam-i2c-sensor";
|
||||
csiphy-sd-index = <2>;
|
||||
sensor-position-roll = <270>;
|
||||
sensor-position-pitch = <0>;
|
||||
sensor-position-yaw = <180>;
|
||||
eeprom-src = <&eeprom_triple_uw>;
|
||||
actuator-src = <&actuator_triple_uw>;
|
||||
led-flash-src = <&led_flash_triple_rear_ultrawide>;
|
||||
cam_vio-supply = <&L3N>;
|
||||
cam_vdig-supply = <&L1M>;
|
||||
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
|
||||
cam_vana-supply = <&L3M>;
|
||||
cam_v_custom1-supply = <&L4N>;
|
||||
cam_vaf-supply = <&L7M>;
|
||||
regulator-names = "cam_vio", "cam_vdig","cam_clk", "cam_vana",
|
||||
"cam_v_custom1", "cam_vaf";
|
||||
rgltr-cntrl-support;
|
||||
aon-camera-id = <AON_CAM2>;
|
||||
rgltr-min-voltage = <1800000 1104000 0 2800000 1800000 2960000>;
|
||||
rgltr-max-voltage = <1800000 1104000 0 2800000 1800000 2960000>;
|
||||
rgltr-load-current = <6000 644000 0 77900 82900 103000>;
|
||||
gpio-no-mux = <0>;
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_sensor_mclk2_active
|
||||
&cam_sensor_active_rst2
|
||||
&cam_sensor_ponv_rear_active>;
|
||||
pinctrl-1 = <&cam_sensor_mclk2_suspend
|
||||
&cam_sensor_suspend_rst2
|
||||
&cam_sensor_ponv_rear_suspend>;
|
||||
gpios = <&tlmm 102 0>,
|
||||
<&tlmm 3 0>,
|
||||
<&tlmm 2 0>;
|
||||
gpio-reset = <1>;
|
||||
gpio-standby = <2>;
|
||||
gpio-req-tbl-num = <0 1 2>;
|
||||
gpio-req-tbl-flags = <1 0 0>;
|
||||
gpio-req-tbl-label = "CAMIF_MCLK2",
|
||||
"CAM_RESET2",
|
||||
"CAM_STANDBY";
|
||||
clocks = <&camcc CAM_CC_MCLK2_CLK>;
|
||||
clock-names = "cam_clk";
|
||||
clock-cntl-level = "nominal";
|
||||
clock-rates = <24000000>;
|
||||
status = "ok";
|
||||
};
|
||||
};
|
||||
|
||||
&i3c2 {
|
||||
se-clock-frequency = <100000000>;
|
||||
i3c-scl-hz = <12500000>;
|
||||
dfs-index = <0>;
|
||||
i2c-scl-hz = <1000000>;
|
||||
qcom,pm-ctrl-client;
|
||||
status = "ok";
|
||||
|
||||
actuator_i3c_triple_wide: qcom,actuator@c {
|
||||
cell-index = <8>;
|
||||
compatible = "qcom,cam-i2c-actuator";
|
||||
reg = <0x0C 0x00 0x10>;
|
||||
cam_vaf-supply = <&L7M>;
|
||||
regulator-names = "cam_vaf";
|
||||
rgltr-cntrl-support;
|
||||
rgltr-min-voltage = <2960000>;
|
||||
rgltr-max-voltage = <2960000>;
|
||||
rgltr-load-current = <119000>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
eeprom_i3c_wide: qcom,eeprom@50 {
|
||||
cell-index = <8>;
|
||||
reg = <0x50 0x00 0x10>;
|
||||
compatible = "qcom,cam-i2c-eeprom";
|
||||
cam_vio-supply = <&L3N>;
|
||||
cam_vdig-supply = <&L1N>;
|
||||
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
|
||||
cam_vana-supply = <&L6M>;
|
||||
cam_vaf-supply = <&L7M>;
|
||||
cam_v_custom1-supply = <&L5M>;
|
||||
regulator-names = "cam_vio", "cam_vdig", "cam_clk", "cam_vana",
|
||||
"cam_vaf", "cam_v_custom1";
|
||||
rgltr-cntrl-support;
|
||||
rgltr-min-voltage = <1800000 1104000 0 2800000 2960000 1800000>;
|
||||
rgltr-max-voltage = <1800000 1104000 0 2800000 2960000 1800000>;
|
||||
rgltr-load-current = <4000 913000 0 91400 119000 63100>;
|
||||
gpio-no-mux = <0>;
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_sensor_mclk1_active
|
||||
&cam_sensor_active_rst1>;
|
||||
pinctrl-1 = <&cam_sensor_mclk1_suspend
|
||||
&cam_sensor_suspend_rst1>;
|
||||
gpios = <&tlmm 101 0>,
|
||||
<&tlmm 15 0>;
|
||||
gpio-reset = <1>;
|
||||
gpio-req-tbl-num = <0 1>;
|
||||
gpio-req-tbl-flags = <1 0>;
|
||||
gpio-req-tbl-label = "CAMIF_MCLK1",
|
||||
"CAM_RESET1";
|
||||
clocks = <&camcc CAM_CC_MCLK1_CLK>;
|
||||
clock-names = "cam_clk";
|
||||
clock-cntl-level = "nominal";
|
||||
clock-rates = <24000000>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
ois_i3c_wide: qcom,ois@72 {
|
||||
cell-index = <8>;
|
||||
reg = <0x72 0x00 0x10>;
|
||||
compatible = "qcom,cam-i2c-ois";
|
||||
cam_vio-supply = <&L3N>;
|
||||
cam_vaf-supply = <&L7M>;
|
||||
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
|
||||
regulator-names = "cam_vio" ,"cam_vaf", "cam_clk";
|
||||
rgltr-cntrl-support;
|
||||
rgltr-min-voltage = <1800000 2960000 0>;
|
||||
rgltr-max-voltage = <1800000 2960000 0>;
|
||||
rgltr-load-current = <4000 119000 0>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
qcom,cam-sensor@34,36007660000 {
|
||||
cell-index = <8>;
|
||||
reg = <0x34 0x360 0x07660000>;
|
||||
assigned-address = <0xa>;
|
||||
scl-hz = <4000000>;
|
||||
compatible = "qcom,cam-sensor";
|
||||
csiphy-sd-index = <1>;
|
||||
sensor-position-roll = <90>;
|
||||
sensor-position-pitch = <0>;
|
||||
sensor-position-yaw = <180>;
|
||||
actuator-src = <&actuator_i3c_triple_wide>;
|
||||
eeprom-src = <&eeprom_i3c_wide>;
|
||||
ois-src = <&ois_i3c_wide>;
|
||||
led-flash-src = <&led_flash_triple_rear_wide>;
|
||||
cam_vio-supply = <&L3N>;
|
||||
cam_vdig-supply = <&L1N>;
|
||||
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
|
||||
cam_vana-supply = <&L6M>;
|
||||
cam_vaf-supply = <&L7M>;
|
||||
cam_v_custom1-supply = <&L5M>;
|
||||
regulator-names = "cam_vio", "cam_vdig", "cam_clk", "cam_vana",
|
||||
"cam_vaf", "cam_v_custom1";
|
||||
rgltr-cntrl-support;
|
||||
i3c-target;
|
||||
rgltr-min-voltage = <1800000 1104000 0 2800000 2960000 1800000>;
|
||||
rgltr-max-voltage = <1800000 1104000 0 2800000 2960000 1800000>;
|
||||
rgltr-load-current = <4000 913000 0 91400 119000 63100>;
|
||||
gpio-no-mux = <0>;
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_sensor_mclk1_active
|
||||
&cam_sensor_active_rst1>;
|
||||
pinctrl-1 = <&cam_sensor_mclk1_suspend
|
||||
&cam_sensor_suspend_rst1>;
|
||||
gpios = <&tlmm 101 0>,
|
||||
<&tlmm 15 0>;
|
||||
gpio-reset = <1>;
|
||||
gpio-req-tbl-num = <0 1>;
|
||||
gpio-req-tbl-flags = <1 0>;
|
||||
gpio-req-tbl-label = "CAMIF_MCLK1",
|
||||
"CAM_RESET1";
|
||||
clocks = <&camcc CAM_CC_MCLK1_CLK>;
|
||||
clock-names = "cam_clk";
|
||||
clock-cntl-level = "nominal";
|
||||
clock-rates = <24000000>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
qcom,cam-sensor@10 {
|
||||
cell-index = <6>;
|
||||
reg = <0x10 0x00 0x10>;
|
||||
compatible = "qcom,cam-i2c-sensor";
|
||||
csiphy-sd-index = <2>;
|
||||
sensor-position-roll = <90>;
|
||||
sensor-position-pitch = <0>;
|
||||
sensor-position-yaw = <180>;
|
||||
eeprom-src = <&eeprom_i3c_wide>;
|
||||
actuator-src = <&actuator_i3c_triple_wide>;
|
||||
led-flash-src = <&led_flash_aon_rear>;
|
||||
cam_vio-supply = <&L3N>;
|
||||
cam_vdig-supply = <&L2N>;
|
||||
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
|
||||
cam_vana-supply = <&L5N>;
|
||||
cam_v_custom1-supply = <&L4N>;
|
||||
cam_vaf-supply = <&L7M>;
|
||||
regulator-names = "cam_vio", "cam_vdig","cam_clk", "cam_vana",
|
||||
"cam_v_custom1", "cam_vaf";
|
||||
rgltr-cntrl-support;
|
||||
aon-camera-id = <AON_CAM2>;
|
||||
rgltr-min-voltage = <1800000 1056000 0 2800000 1800000 2960000>;
|
||||
rgltr-max-voltage = <1800000 1056000 0 2800000 1800000 2960000>;
|
||||
rgltr-load-current = <6000 454000 0 77900 29400 103000>;
|
||||
gpio-no-mux = <0>;
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_sensor_mclk2_active
|
||||
&cam_sensor_active_rst2
|
||||
&cam_sensor_ponv_rear_active>;
|
||||
pinctrl-1 = <&cam_sensor_mclk2_suspend
|
||||
&cam_sensor_suspend_rst2
|
||||
&cam_sensor_ponv_rear_suspend>;
|
||||
gpios = <&tlmm 102 0>,
|
||||
<&tlmm 3 0>,
|
||||
<&tlmm 2 0>;
|
||||
gpio-reset = <1>;
|
||||
gpio-standby = <2>;
|
||||
gpio-req-tbl-num = <0 1 2>;
|
||||
gpio-req-tbl-flags = <1 0 0>;
|
||||
gpio-req-tbl-label = "CAMIF_MCLK2",
|
||||
"CAM_RESET2",
|
||||
"CAM_STANDBY";
|
||||
clocks = <&camcc CAM_CC_MCLK2_CLK>;
|
||||
clock-names = "cam_clk";
|
||||
clock-cntl-level = "nominal";
|
||||
clock-rates = <24000000>;
|
||||
status = "ok";
|
||||
};
|
||||
};
|
||||
Reference in New Issue
Block a user