bindings: power: supply: add QTI battery charger

Add DT bindings for QTI battery charger which gets and sets
power supply properties by communicating with charger firmware
running on the remote subsystem (e.g. DSP) over PMIC Glink.

This is a snapshot taken as of qcom-6.1
commit 7b5e13f9043d ("dt-bindings: power: supply:
qcom,battery-charger: Add display panel property")
which was then converted to yaml.

Change-Id: I8e3aedfb70c627807388db3c449c283f35ecfd59
Signed-off-by: David Collins <quic_collinsd@quicinc.com>

bindings/power/supply/qcom,battery-charger.yaml

@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/qcom,battery-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. Battery Charger Glink Device
+
+maintainers:
+  - Subbaraman Narayanamurthy <quic_subbaram@quicinc.com>
+
+description: |
+  This binding describes the Qualcomm Technologies, Inc. battery charger device.
+  The QTI battery charger gets and sets power supply properties by communicating
+  with charger firmware running on a remote subsystem (e.g. DSP) over PMIC
+  Glink.
+
+properties:
+  compatible:
+    const: qcom,battery-charger
+
+  qcom,thermal-mitigation:
+    description: |
+      Array of fast charge current limit values for different system thermal
+      mitigation levels. This should be a flat array that denotes the maximum
+      charging current (in uA) for each thermal level. Elements should be listed
+      in monotonically decreasing (non-increasing) order.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  qcom,thermal-mitigation-step:
+    description: |
+      Fast charging current step (in uA) which if specified would be used to
+      calculate different system thermal mitigation levels based on the maximum
+      charging current provided by the charger firmware. This property can be
+      specified only if "qcom,thermal-mitigation" property is not specified.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 500000
+
+  qcom,wireless-fw-name:
+    description: |
+      Firmware name that is used for updating wireless charger firmware.
+    $ref: /schemas/types.yaml#/definitions/string
+
+  qcom,shutdown-voltage:
+    description: |
+      Battery voltage (in mV) when shutdown needs to be initiated when battery
+      SOC reaches 0 and device is not charging.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  qcom,display-panels:
+    description: |
+      Array of one or more phandles of the display panel(s) that sends the DRM
+      blank/unblank notifications.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+
+required:
+  - compatible
+
+allOf:
+  - if:
+      required:
+        - qcom,thermal-mitigation
+    then:
+      properties:
+        qcom,thermal-mitigation-step: false
+
+  - if:
+      required:
+        - qcom,thermal-mitigation-step
+    then:
+      properties:
+        qcom,thermal-mitigation: false
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic_glink {
+      battery_charger {
+        compatible = "qcom,battery-charger";
+        qcom,thermal-mitigation = <3000000 1500000 1000000 500000>;
+        qcom,wireless-fw-name = "idt9412.bin";
+        qcom,shutdown-voltage = <3100>;
+      };
+    };