dt-bindings: platform: msm: Add gpi bindings for Sun

Add gpi driver binding for Sun device.

Change-Id: I6667f73eb4258b107eb0a5060efeffd55a9075a6
Signed-off-by: Anil Veshala Veshala <quic_aveshala@quicinc.com>

bindings/dma/qcom,msm_gpi.yaml

@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/qcom,msm_gpi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies Inc GPI DMA controller
+
+maintainers:
+  - Mukesh Savaliya <quic_msavaliy@quicinc.com>
+
+description: |
+  QCOM GPI DMA controller provides DMA capabilities for
+  peripheral buses such as I2C, UART, and SPI.
+
+allOf:
+  - $ref: "dma-controller.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - qcom,gpi-dma
+
+  reg:
+    maxItems: 1
+
+  reg-names:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Interrupt lines for each GPI instance
+    minItems: 1
+    maxItems: 12
+
+  "#dma-cells":
+    const: 3
+    description: >
+      DMA clients must use the format described in dma.txt, giving a phandle
+      to the DMA controller plus the following 3 integer cells:
+      - channel: if set to 0xffffffff, any available channel will be allocated
+        for the client. Otherwise, the exact channel specified will be used.
+      - seid: serial id of the client as defined in the SoC documentation.
+      - client: type of the client as defined in dt-bindings/dma/qcom-gpi.h
+
+  iommus:
+    maxItems: 1
+
+  qcom,max-num-gpii:
+    maximum: 12
+
+  qcom,gpii-mask:
+    maxItems: 1
+
+  qcom,static-gpii-mask:
+    maxItems: 1
+
+  qcom,ev-factor:
+    maxItems: 1
+
+  qcom,qcom,iommu-dma-addr-pool:
+    maxItems: 1
+
+  qcom,gpi-ee-offset:
+    maxItems: 1
+
+  dma-coherent:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - dma-cells
+  - iommus
+  - qcom,max-num-gpii
+  - qcom,gpii-mask
+  - qcom,ev-factor
+  - qcom,qcom,iommu-dma-addr-pool
+  - gpi-ee-offset
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/dma/qcom-gpi.h>
+    gpi_dma1: qcom,gpi-dma@a00000  {
+       compatible = "qcom,gpi-dma";
+       #dma-cells = <5>;
+       reg = <0xa00000  0x60000>;
+       reg-names = "gpi-top";
+       iommus = <&apps_smmu 0xb6 0x0>;
+       qcom,max-num-gpii = <12>;
+       interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+                    <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+                    <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+                    <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+                    <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+                    <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+                    <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+                    <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+                    <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+                    <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+                    <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+                    <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+       qcom,static-gpii-mask = <0x3>;
+       qcom,gpii-mask = <0xc>;
+       qcom,ev-factor = <1>;
+       qcom,iommu-dma-addr-pool = <0x100000 0x100000>;
+       qcom,gpi-ee-offset = <0x10000>;
+       dma-coherent;
+   };
+
+...