dt-bindings: Add devicetree bindings
Add snapshot of device tree bindings from keystone common kernel, branch "android-mainline-keystone-qcom-release" at c4c12103f9c0 ("Snap for 9228065 from e32903b9a63bb558df8b803b076619c53c16baad to android-mainline-keystone-qcom-release"). Change-Id: I7682079615cbd9f29340a5c1f2a1d84ec441a1f1 Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
This commit is contained in:
94
bindings/spi/qcom,spi-qcom-qspi.yaml
Normal file
94
bindings/spi/qcom,spi-qcom-qspi.yaml
Normal file
@@ -0,0 +1,94 @@
|
||||
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
||||
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: "http://devicetree.org/schemas/spi/qcom,spi-qcom-qspi.yaml#"
|
||||
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
|
||||
|
||||
title: Qualcomm Quad Serial Peripheral Interface (QSPI)
|
||||
|
||||
maintainers:
|
||||
- Bjorn Andersson <bjorn.andersson@linaro.org>
|
||||
|
||||
description: The QSPI controller allows SPI protocol communication in single,
|
||||
dual, or quad wire transmission modes for read/write access to slaves such
|
||||
as NOR flash.
|
||||
|
||||
allOf:
|
||||
- $ref: /schemas/spi/spi-controller.yaml#
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
items:
|
||||
- enum:
|
||||
- qcom,sc7180-qspi
|
||||
- qcom,sc7280-qspi
|
||||
- qcom,sdm845-qspi
|
||||
|
||||
- const: qcom,qspi-v1
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
clock-names:
|
||||
items:
|
||||
- const: iface
|
||||
- const: core
|
||||
|
||||
clocks:
|
||||
items:
|
||||
- description: AHB clock
|
||||
- description: QSPI core clock
|
||||
|
||||
interconnects:
|
||||
minItems: 1
|
||||
maxItems: 2
|
||||
|
||||
interconnect-names:
|
||||
minItems: 1
|
||||
items:
|
||||
- const: qspi-config
|
||||
- const: qspi-memory
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- interrupts
|
||||
- clock-names
|
||||
- clocks
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/clock/qcom,gcc-sdm845.h>
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
|
||||
soc: soc {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
|
||||
qspi: spi@88df000 {
|
||||
compatible = "qcom,sdm845-qspi", "qcom,qspi-v1";
|
||||
reg = <0 0x88df000 0 0x600>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clock-names = "iface", "core";
|
||||
clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
|
||||
<&gcc GCC_QSPI_CORE_CLK>;
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <25000000>;
|
||||
spi-tx-bus-width = <2>;
|
||||
spi-rx-bus-width = <2>;
|
||||
};
|
||||
|
||||
};
|
||||
};
|
||||
...
|
Reference in New Issue
Block a user