dt-bindings: Add devicetree bindings

Add snapshot of device tree bindings from keystone common kernel, branch
"android-mainline-keystone-qcom-release" at c4c12103f9c0 ("Snap for 9228065
from e32903b9a63bb558df8b803b076619c53c16baad to
android-mainline-keystone-qcom-release").

Change-Id: I7682079615cbd9f29340a5c1f2a1d84ec441a1f1
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>

bindings/regmap/regmap.txt

@@ -0,0 +1,29 @@
+Devicetree binding for regmap
+
+Optional properties:
+
+   little-endian,
+   big-endian,
+   native-endian:	See common-properties.txt for a definition
+
+Note:
+Regmap defaults to little-endian register access on MMIO based
+devices, this is by far the most common setting. On CPU
+architectures that typically run big-endian operating systems
+(e.g. PowerPC), registers can be defined as big-endian and must
+be marked that way in the devicetree.
+
+On SoCs that can be operated in both big-endian and little-endian
+modes, with a single hardware switch controlling both the endianness
+of the CPU and a byteswap for MMIO registers (e.g. many Broadcom MIPS
+chips), "native-endian" is used to allow using the same device tree
+blob in both cases.
+
+Examples:
+Scenario 1 : a register set in big-endian mode.
+dev: dev@40031000 {
+	      compatible = "syscon";
+	      reg = <0x40031000 0x1000>;
+	      big-endian;
+	      ...
+};