samsung_sm8750/android_kernel_samsung_sm8750-devicetrees
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

dt-bindings: Add devicetree bindings

Browse Source 
Add snapshot of device tree bindings from keystone common kernel, branch
"android-mainline-keystone-qcom-release" at c4c12103f9c0 ("Snap for 9228065
from e32903b9a63bb558df8b803b076619c53c16baad to
android-mainline-keystone-qcom-release").

Change-Id: I7682079615cbd9f29340a5c1f2a1d84ec441a1f1
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
This commit is contained in:
Melody Olvera
2023-04-03 14:38:11 -07:00
parent c334acf377
commit 6f18ce8026
4878 changed files with 424312 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

21
bindings/fpga/lattice-ice40-fpga-mgr.txt Normal file
View File

@@ -0,0 +1,21 @@
Lattice iCE40 FPGA Manager
Required properties:
- compatible: Should contain "lattice,ice40-fpga-mgr"
- reg: SPI chip select
- spi-max-frequency: Maximum SPI frequency (>=1000000, <=25000000)
- cdone-gpios: GPIO input connected to CDONE pin
- reset-gpios: Active-low GPIO output connected to CRESET_B pin. Note
that unless the GPIO is held low during startup, the
FPGA will enter Master SPI mode and drive SCK with a
clock signal potentially jamming other devices on the
bus until the firmware is loaded.
Example:
fpga: fpga@0 {
compatible = "lattice,ice40-fpga-mgr";
reg = <0>;
spi-max-frequency = <1000000>;
cdone-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
reset-gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
};