dt-bindings: Add devicetree bindings

Add snapshot of device tree bindings from keystone common kernel, branch
"android-mainline-keystone-qcom-release" at c4c12103f9c0 ("Snap for 9228065
from e32903b9a63bb558df8b803b076619c53c16baad to
android-mainline-keystone-qcom-release").

Change-Id: I7682079615cbd9f29340a5c1f2a1d84ec441a1f1
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>

bindings/crypto/inside-secure-safexcel.txt

@@ -0,0 +1,40 @@
+Inside Secure SafeXcel cryptographic engine
+
+Required properties:
+- compatible: Should be "inside-secure,safexcel-eip197b",
+	      "inside-secure,safexcel-eip197d" or
+              "inside-secure,safexcel-eip97ies".
+- reg: Base physical address of the engine and length of memory mapped region.
+- interrupts: Interrupt numbers for the rings and engine.
+- interrupt-names: Should be "ring0", "ring1", "ring2", "ring3", "eip", "mem".
+
+Optional properties:
+- clocks: Reference to the crypto engine clocks, the second clock is
+          needed for the Armada 7K/8K SoCs.
+- clock-names: mandatory if there is a second clock, in this case the
+               name must be "core" for the first clock and "reg" for
+               the second one.
+
+Backward compatibility:
+Two compatibles are kept for backward compatibility, but shouldn't be used for
+new submissions:
+- "inside-secure,safexcel-eip197" is equivalent to
+  "inside-secure,safexcel-eip197b".
+- "inside-secure,safexcel-eip97" is equivalent to
+  "inside-secure,safexcel-eip97ies".
+
+Example:
+
+	crypto: crypto@800000 {
+		compatible = "inside-secure,safexcel-eip197b";
+		reg = <0x800000 0x200000>;
+		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "mem", "ring0", "ring1", "ring2", "ring3",
+				  "eip";
+		clocks = <&cpm_syscon0 1 26>;
+	};