dt-bindings: Add devicetree bindings

Add snapshot of device tree bindings from keystone common kernel, branch
"android-mainline-keystone-qcom-release" at c4c12103f9c0 ("Snap for 9228065
from e32903b9a63bb558df8b803b076619c53c16baad to
android-mainline-keystone-qcom-release").

Change-Id: I7682079615cbd9f29340a5c1f2a1d84ec441a1f1
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>

bindings/arm/atmel-sysregs.txt

@@ -0,0 +1,191 @@
+Atmel system registers
+
+Chipid required properties:
+- compatible: Should be "atmel,sama5d2-chipid" or "microchip,sama7g5-chipid"
+- reg : Should contain registers location and length
+
+PIT Timer required properties:
+- compatible: Should be "atmel,at91sam9260-pit"
+- reg: Should contain registers location and length
+- interrupts: Should contain interrupt for the PIT which is the IRQ line
+  shared across all System Controller members.
+
+PIT64B Timer required properties:
+- compatible: Should be "microchip,sam9x60-pit64b"
+- reg: Should contain registers location and length
+- interrupts: Should contain interrupt for PIT64B timer
+- clocks: Should contain the available clock sources for PIT64B timer.
+
+System Timer (ST) required properties:
+- compatible: Should be "atmel,at91rm9200-st", "syscon", "simple-mfd"
+- reg: Should contain registers location and length
+- interrupts: Should contain interrupt for the ST which is the IRQ line
+  shared across all System Controller members.
+- clocks: phandle to input clock.
+Its subnodes can be:
+- watchdog: compatible should be "atmel,at91rm9200-wdt"
+
+RAMC SDRAM/DDR Controller required properties:
+- compatible: Should be "atmel,at91rm9200-sdramc", "syscon"
+			"atmel,at91sam9260-sdramc",
+			"atmel,at91sam9g45-ddramc",
+			"atmel,sama5d3-ddramc",
+			"microchip,sam9x60-ddramc",
+			"microchip,sama7g5-uddrc"
+- reg: Should contain registers location and length
+
+Examples:
+
+	ramc0: ramc@ffffe800 {
+		compatible = "atmel,at91sam9g45-ddramc";
+		reg = <0xffffe800 0x200>;
+	};
+
+RAMC PHY Controller required properties:
+- compatible: Should be "microchip,sama7g5-ddr3phy", "syscon"
+- reg: Should contain registers location and length
+
+Example:
+
+	ddr3phy: ddr3phy@e3804000 {
+		compatible = "microchip,sama7g5-ddr3phy", "syscon";
+		reg = <0xe3804000 0x1000>;
+};
+
+SHDWC Shutdown Controller
+
+required properties:
+- compatible: Should be "atmel,<chip>-shdwc".
+  <chip> can be "at91sam9260", "at91sam9rl" or "at91sam9x5".
+- reg: Should contain registers location and length
+- clocks: phandle to input clock.
+
+optional properties:
+- atmel,wakeup-mode: String, operation mode of the wakeup mode.
+  Supported values are: "none", "high", "low", "any".
+- atmel,wakeup-counter: Counter on Wake-up 0 (between 0x0 and 0xf).
+
+optional at91sam9260 properties:
+- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
+
+optional at91sam9rl properties:
+- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up.
+- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
+
+optional at91sam9x5 properties:
+- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up.
+
+Example:
+
+	shdwc@fffffd10 {
+		compatible = "atmel,at91sam9260-shdwc";
+		reg = <0xfffffd10 0x10>;
+		clocks = <&clk32k>;
+	};
+
+SHDWC SAMA5D2-Compatible Shutdown Controller
+
+1) shdwc node
+
+required properties:
+- compatible: should be "atmel,sama5d2-shdwc", "microchip,sam9x60-shdwc" or
+  "microchip,sama7g5-shdwc"
+- reg: should contain registers location and length
+- clocks: phandle to input clock.
+- #address-cells: should be one. The cell is the wake-up input index.
+- #size-cells: should be zero.
+
+optional properties:
+
+- debounce-delay-us: minimum wake-up inputs debouncer period in
+  microseconds. It's usually a board-related property.
+- atmel,wakeup-rtc-timer: boolean to enable Real-Time Clock wake-up.
+
+optional microchip,sam9x60-shdwc or microchip,sama7g5-shdwc properties:
+- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
+
+The node contains child nodes for each wake-up input that the platform uses.
+
+2) input nodes
+
+Wake-up input nodes are usually described in the "board" part of the Device
+Tree. Note also that input 0 is linked to the wake-up pin and is frequently
+used.
+
+Required properties:
+- reg: should contain the wake-up input index [0 - 15].
+
+Optional properties:
+- atmel,wakeup-active-high: boolean, the corresponding wake-up input described
+  by the child, forces the wake-up of the core power supply on a high level.
+  The default is to be active low.
+
+Example:
+
+On the SoC side:
+	shdwc@f8048010 {
+		compatible = "atmel,sama5d2-shdwc";
+		reg = <0xf8048010 0x10>;
+		clocks = <&clk32k>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		atmel,wakeup-rtc-timer;
+	};
+
+On the board side:
+	shdwc@f8048010 {
+		debounce-delay-us = <976>;
+
+		input@0 {
+			reg = <0>;
+		};
+
+		input@1 {
+			reg = <1>;
+			atmel,wakeup-active-high;
+		};
+	};
+
+Special Function Registers (SFR)
+
+Special Function Registers (SFR) manage specific aspects of the integrated
+memory, bridge implementations, processor and other functionality not controlled
+elsewhere.
+
+required properties:
+- compatible: Should be "atmel,<chip>-sfr", "syscon" or
+	"atmel,<chip>-sfrbu", "syscon"
+  <chip> can be "sama5d3", "sama5d4" or "sama5d2".
+  It also can be "microchip,sam9x60-sfr", "syscon".
+- reg: Should contain registers location and length
+
+	sfr@f0038000 {
+		compatible = "atmel,sama5d3-sfr", "syscon";
+		reg = <0xf0038000 0x60>;
+	};
+
+Security Module (SECUMOD)
+
+The Security Module macrocell provides all necessary secure functions to avoid
+voltage, temperature, frequency and mechanical attacks on the chip. It also
+embeds secure memories that can be scrambled.
+
+The Security Module also offers the PIOBU pins which can be used as GPIO pins.
+Note that they maintain their voltage during Backup/Self-refresh.
+
+required properties:
+- compatible: Should be "atmel,<chip>-secumod", "syscon".
+  <chip> can be "sama5d2".
+- reg: Should contain registers location and length
+- gpio-controller:	Marks the port as GPIO controller.
+- #gpio-cells:		There are 2. The pin number is the
+			first, the second represents additional
+			parameters such as GPIO_ACTIVE_HIGH/LOW.
+
+
+	secumod@fc040000 {
+		compatible = "atmel,sama5d2-secumod", "syscon";
+		reg = <0xfc040000 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};