From 6e09c43dd26387a78542b454a5d95305af4122ca Mon Sep 17 00:00:00 2001
From: Hemant Gupta <quic_hemantg@quicinc.com>
Date: Sun, 7 Jan 2024 22:37:05 +0530
Subject: [PATCH] btfm: dts: msm: Add support for WCN788x

Add support for WCN788x

Change-Id: I4bda39109e553cfacd32b15235b6f58ce803bb8a
Signed-off-by: Hemant Gupta <quic_hemantg@quicinc.com>
---
 Kbuild              |  1 +
 sun-wcn788x-v8.dts  | 17 ++++++++
 sun-wcn788x-v8.dtsi | 96 +++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 114 insertions(+)
 create mode 100644 sun-wcn788x-v8.dts
 create mode 100644 sun-wcn788x-v8.dtsi

diff --git a/Kbuild b/Kbuild
index afbc4195..4318b43d 100644
--- a/Kbuild
+++ b/Kbuild
@@ -7,6 +7,7 @@ dtbo-y += sun-peach-bt.dtbo
 dtbo-y += sun-kiwi-bt.dtbo
 dtbo-y += sun-peach-bt-v8.dtbo
 dtbo-y += sun-kiwi-bt-v8.dtbo
+dtbo-y += sun-wcn788x-v8.dtbo
 endif
 
 always-y        := $(dtb-y) $(dtbo-y)
diff --git a/sun-wcn788x-v8.dts b/sun-wcn788x-v8.dts
new file mode 100644
index 00000000..f74fde62
--- /dev/null
+++ b/sun-wcn788x-v8.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include "sun-wcn788x-v8.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. Sun SoCs";
+	compatible = "qcom,sun", "qcom,sunp";
+	qcom,msm-id = <618 0x10000>, <618 0x20000>, <639 0x10000>, <639 0x20000>;
+	qcom,board-id = <0x30008 0>, <0x40001 0>;
+};
diff --git a/sun-wcn788x-v8.dtsi b/sun-wcn788x-v8.dtsi
new file mode 100644
index 00000000..14952ca7
--- /dev/null
+++ b/sun-wcn788x-v8.dtsi
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interconnect/qcom,sun.h>
+
+&pm8550ve_f_gpios {
+	bt_en: bt_en {
+		pins = "gpio3";
+		function = "normal";
+		input-disable;
+		output-enable;
+		bias-disable;
+		power-source = <1>;
+	};
+};
+
+&tlmm {
+	cnss_bt_sw_ctrl: cnss_wlan_sw_ctrl {
+		mux {
+			pins = "gpio18";
+			function = "wcn_sw_ctrl";
+		};
+	};
+};
+
+&soc {
+	bluetooth: wcn788x {
+			compatible = "qcom,wcn788x";
+			qcom,wcn788x;
+			pinctrl-names = "bt_en", "sw_ctrl";
+			pinctrl-0 = <&bt_en>;
+			pinctrl-1 = <&cnss_bt_sw_ctrl>;
+			/* List of GPIOs to be setup for interrupt wakeup capable*/
+			mpm_wake_set_gpios = <18>;
+			qcom,wl-reset-gpio = <&tlmm 16 0>; /* WL_EN */
+			qcom,bt-sw-ctrl-gpio = <&tlmm 18 0>; /* SW_CTRL */
+			qcom,bt-reset-gpio = <&pm8550ve_f_gpios 3 0>; /* BT_EN */
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,bt-vdd18-aon-supply  = <&L3F>;   /* VDD1P8_AON */
+			qcom,bt-vdd12-io-supply   = <&L2F>;   /* VDD1P2_IO */
+			qcom,bt-ant-ldo-supply    = <&L6K>;   /* AV91C_VDD Extractor */
+			qcom,bt-vdd-dig-supply    = <&S5F>;   /* BT CX_MX LDO */
+			qcom,bt-vdd-aon-supply    = <&S5F>;   /* RFA_CMN/AON */
+			qcom,bt-vdd-rfa0p75-supply = <&S5F>;  /* RFA_OP75 */
+			qcom,bt-vdd-rfa1p8-supply  = <&S3G>;  /* RFA_1P8 */
+			qcom,bt-vdd-rfa1p25-supply = <&S7I>; /* RFA_1P2 */
+
+			qcom,bt-vdd18-aon-config  = <1800000 1800000 0 1>;
+			qcom,bt-vdd12-io-config   = <1200000 1200000 0 1>;
+			qcom,bt-ant-ldo-config    = <1800000 1860000 0 1>;
+			qcom,bt-vdd-aon-config    = <876000 1000000 0 1>;
+			qcom,bt-vdd-dig-config    = <876000 1000000 0 1>;
+			qcom,bt-vdd-rfa0p75-config = <876000 1000000 0 1>;
+			qcom,bt-vdd-rfa1p8-config = <1860000 2000000 0 1>;
+			qcom,bt-vdd-rfa1p25-config  = <1312000 1340000 0 1>;
+
+			qcom,pdc_init_table=
+				"{class: wlan_pdc, ss: rf, res: s5f.v, upval: 876}",
+				"{class: wlan_pdc, ss: rf, res: s5f.v, dwnval:660}",
+				"{class: wlan_pdc, ss: rf, res: s7i.v, upval: 1312}",
+				"{class: wlan_pdc, ss: rf, res: s7i.v, dwnval:1244}",
+				"{class: wlan_pdc, ss: rf, res: s3g.v, upval: 1860}",
+				"{class: wlan_pdc, ss: rf, res: s3g.v, dwnval: 0}";
+	};
+};
+
+&swr4 {
+	btswr_slave: btswr-slave {
+		compatible = "qcom,btfmswr_slave";
+		reg = <0x02 0x08170220>;
+	};
+};
+
+// FM changes
+&qupv3_se5_i2c {
+    status = "ok";
+	nq@64 {
+		compatible = "rtc6226";
+		reg = <0x64>;
+		fmint-gpio = <&tlmm 84 0>;
+		vdd-supply = <&L16B>;
+		rtc6226,vdd-supply-voltage = <2800000 2800000>;
+		rtc6226,vdd-load = <15000>;
+		vio-supply = <&L15B>;
+		rtc6226,vio-supply-voltage = <1800000 1800000>;
+	};
+};
+
+//uart instance
+&qupv3_se14_4uart {
+	status = "ok";
+};
\ No newline at end of file