ARM: dts: msm: Add pmih010x support for tuna

Add pmih010x support for tuna.

While at it add sys-therm-11 for tuna.

Change-Id: Idc08213fdadb300d0eb793f422ecf9b210785db9
Signed-off-by: Kavya Nunna <quic_knunna@quicinc.com>

qcom/tuna-atp-overlay.dts

@@ -7,6 +7,8 @@
 /plugin/;
 
 #include "tuna-atp.dtsi"
+#include "tuna-pmih010x.dtsi"
+#include "pmd802x.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. Tuna ATP";

qcom/tuna-pmic-overlay.dtsi

@@ -11,7 +11,6 @@
 #include "pm8550vs.dtsi"
 #include "pmr735b.dtsi"
 #include "pm8550ve.dtsi"
-#include "pmd802x.dtsi"
 #include "pm8010.dtsi"
 
 &pm8550vs_g {
@@ -243,6 +242,25 @@
 			};
 		};
 	};
+
+	sys-therm-11 {
+		polling-delay-passive = <0>;
+		polling-delay = <0>;
+		thermal-sensors = <&pmk8550_vadc PMXR2230_ADC5_GEN3_AMUX_THM5_100K_PU>;
+		trips {
+			active-config0 {
+				temperature = <125000>;
+				hysteresis = <1000>;
+				type = "passive";
+			};
+
+			active-config1 {
+				temperature = <125000>;
+				hysteresis = <1000>;
+				type = "passive";
+			};
+		};
+	};
 };
 
 &pmk8550_vadc {
@@ -342,6 +360,15 @@
 		qcom,adc-tm-type = <1>;
 	};
 
+	pmxr2230_sys_therm_11 {
+		reg = <PMXR2230_ADC5_GEN3_AMUX_THM5_100K_PU>;
+		label = "pmxr2230_sys_therm_11";
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		qcom,adc-tm-type = <1>;
+	};
+
 	pm8550vs_d_die_temp {
 		reg = <PM8550VX_ADC5_GEN3_DIE_TEMP(3)>;
 		label = "pm8550vs_d_die_temp";

qcom/tuna-pmih010x.dtsi

@@ -0,0 +1,200 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include "pmih010x.dtsi"
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/iio/qcom,spmi-adc5-gen4-pmih010x.h>
+
+&pmic_glink_debug {
+	spmi@0 {
+		reg = <0>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		pmih010x_glink_debug: qcom,pmih010x-debug@7 {
+			compatible = "qcom,spmi-pmic";
+			reg = <7 SPMI_USID>;
+			qcom,can-sleep;
+		};
+	};
+
+	i2c@104 {
+		reg = <0x104>;  /* I2C instance 4 in ADSP for SE5 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		qcom,bus-type = "i2c";
+
+		qcom,smb1500@69 {
+			compatible = "qcom,i2c-pmic";
+			reg = <0x69>;
+			qcom,can-sleep;
+		};
+	};
+};
+
+&spmi0_debug_bus {
+	qcom,pmih010x-debug@7 {
+		compatible = "qcom,spmi-pmic";
+		reg = <7 SPMI_USID>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+		qcom,can-sleep;
+	};
+};
+
+&pmic_glink_adc {
+	status = "ok";
+
+	smb1500_1_iin {
+		reg = <0x1046901>;
+		label = "smb1393_1_iin";
+	};
+
+	smb1500_1_ichg {
+		reg = <0x1046902>;
+		label = "smb1393_1_ichg";
+	};
+
+	smb1500_1_die_temp {
+		reg = <0x1046903>;
+		label = "smb1393_1_die_temp";
+	};
+};
+
+&battery_charger {
+	qcom,thermal-mitigation-step = <500000>;
+	#cooling-cells = <2>;
+};
+
+&pmih010x_haptics {
+	nvmem-names = "hap_cfg_sdam";
+	nvmem = <&pmk8550_sdam_46>;
+};
+
+&pmih010x_tz {
+	io-channels = <&pmk8550_vadc PMIH010X_ADC5_GEN4_DIE_TEMP>;
+	io-channel-names = "thermal";
+};
+
+&pmk8550_vadc {
+	pmih010x_sys_therm_8 {
+		reg = <PMIH010X_ADC5_GEN4_AMUX_THM4_USB_THERM_100K_PU>;
+		label = "pmih010x_usb_therm";
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		qcom,adc-tm-type = <1>;
+		qcom,adc5-gen4;
+	};
+
+	pmih010x_sys_therm_7 {
+		reg = <PMIH010X_ADC5_GEN4_AMUX4_GPIO12_100K_PU>;
+		label = "pmih010x_wls_therm";
+		qcom,ratiometric;
+		qcom,pre-scaling = <1 1>;
+		qcom,adc-tm-type = <1>;
+		qcom,adc5-gen4;
+	};
+
+	pmih010x_offset_ref {
+		reg = <PMIH010X_ADC5_GEN4_OFFSET_REF>;
+		label = "pmih010x_offset_ref";
+		qcom,pre-scaling = <1 1>;
+		qcom,adc5-gen4;
+	};
+
+	pmih010x_vref_1p25 {
+		reg = <PMIH010X_ADC5_GEN4_1P25VREF>;
+		label = "pmih010x_vref_1p25";
+		qcom,pre-scaling = <1 1>;
+		qcom,adc5-gen4;
+	};
+
+	pmih010x_die_temp {
+		reg = <PMIH010X_ADC5_GEN4_DIE_TEMP>;
+		label = "pmih010x_die_temp";
+		qcom,pre-scaling = <1 1>;
+		qcom,adc5-gen4;
+	};
+
+	pmih010x_vph_pwr {
+		reg = <PMIH010X_ADC5_GEN4_VPH_PWR>;
+		label = "pmih010x_vph_pwr";
+		qcom,pre-scaling = <1 3>;
+		qcom,adc5-gen4;
+	};
+
+	pmih010x_vbat_sns_qbg {
+		reg = <PMIH010X_ADC5_GEN4_VBAT_SNS_QBG>;
+		label = "pmih010x_vbat_sns_qbg";
+		qcom,pre-scaling = <1 3>;
+		qcom,adc5-gen4;
+	};
+
+	pmih010x_iin {
+		reg = <PMIH010X_ADC5_GEN4_IIN>;
+		label = "pmih010x_iin";
+		qcom,adc5-gen4;
+	};
+
+	pmih010x_ichg_fb {
+		reg = <PMIH010X_ADC5_GEN4_ICHG_FB>;
+		label = "pmih010x_ichg_fb";
+		qcom,adc5-gen4;
+	};
+
+	pmih010x_chg_temp {
+		reg = <PMIH010X_ADC5_GEN4_CHG_TEMP>;
+		label = "pmih010x_chg_temp";
+		qcom,adc5-gen4;
+	};
+
+	pmih010x_lite_die_temp {
+		reg = <PMIH010X_ADC5_GEN4_TEMP_ALARM_LITE>;
+		label = "pmih010x_lite_die_temp";
+		qcom,pre-scaling = <1 1>;
+		qcom,adc5-gen4;
+	};
+};
+
+&thermal_zones {
+	sys-therm-7 {
+		polling-delay-passive = <0>;
+		polling-delay = <0>;
+		thermal-sensors = <&pmk8550_vadc PMIH010X_ADC5_GEN4_AMUX4_GPIO12_100K_PU>;
+		trips {
+			active-config0 {
+				temperature = <125000>;
+				hysteresis = <1000>;
+				type = "passive";
+			};
+
+			active-config1 {
+				temperature = <125000>;
+				hysteresis = <1000>;
+				type = "passive";
+			};
+		};
+	};
+
+	sys-therm-8 {
+		polling-delay-passive = <0>;
+		polling-delay = <0>;
+		thermal-sensors = <&pmk8550_vadc PMIH010X_ADC5_GEN4_AMUX_THM4_USB_THERM_100K_PU>;
+		trips {
+			active-config0 {
+				temperature = <125000>;
+				hysteresis = <1000>;
+				type = "passive";
+			};
+
+			active-config1 {
+				temperature = <125000>;
+				hysteresis = <1000>;
+				type = "passive";
+			};
+		};
+	};
+};

qcom/tuna-qrd-overlay.dts

@@ -7,6 +7,8 @@
 /plugin/;
 
 #include "tuna-qrd.dtsi"
+#include "tuna-pmih010x.dtsi"
+#include "pmd802x.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. Tuna QRD";

qcom/tuna-qrd.dtsi

@@ -112,3 +112,6 @@
 	status = "ok";
 };
 
+&thermal_zones {
+	/delete-node/ sys-therm-11;
+};