samsung_sm8750/android_kernel_samsung_sm8750-devicetrees
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

ARM: dts: msm: Enable PM8010, flash, PON, PWM & other nodes for parrot

Browse Source 
Add compatible strings to PON, PWM-LPG, TRI-LED, VIBRATOR, FLASH-V2,
PM8008/PM8010 regulator and AMOLED regulator DT nodes. These were
removed from the bulk DT porting for Parrot on qcom-6.6 device-tree
branch.

While at it, remove the REVID Device node reference and the WLED and
LCDB device nodes as they are not required for Parrot. These were
initially added as a part of the bulk DT porting done for Parrot on
qcom-6.6.

Change-Id: I59666d86f449fd74366b1862bb23d8762b8abdad
Signed-off-by: Shilpa Suresh <quic_c_sbsure@quicinc.com>
This commit is contained in:
Shilpa Suresh
2024-04-29 15:15:56 +05:30
parent d449e86e8d
commit 43a2e6c759
6 changed files with 27 additions and 78 deletions
Download Patch File Download Diff File Expand all files Collapse all files

16
qcom/parrot-pmic-overlay.dtsi
View File

@@ -169,10 +169,6 @@
};
};
&pm6150l_revid {
status = "disabled";
};
&pm6150l_4 {
qcom,power-on@800 {
status = "disabled";
@@ -422,16 +418,13 @@
pinctrl-0 = <&pm8010i_active>;
pm8010-chip@900 {
compatible = "qcom,pm8008-chip";
reg = <0x900>;
PM8010I_EN: qcom,pm8008-chip-en {
regulator-name = "pm8010i-chip-en";
};
};
qcom,revid@100 {
reg = <0x100>;
};
};
pm8010i@9 {
@@ -441,6 +434,7 @@
#size-cells = <0>;
qcom,pm8010i-regulator {
compatible = "qcom,pm8010-regulator";
#address-cells = <1>;
#size-cells = <0>;
@@ -517,16 +511,13 @@
pinctrl-0 = <&pm8010j_active>;
pm8010-chip@900 {
compatible = "qcom,pm8008-chip";
reg = <0x900>;
PM8010J_EN: qcom,pm8008-chip-en {
regulator-name = "pm8010j-chip-en";
};
};
qcom,revid@100 {
reg = <0x100>;
};
};
pm8010j@d {
@@ -536,6 +527,7 @@
#size-cells = <0>;
qcom,pm8010j-regulator {
compatible = "qcom,pm8010-regulator";
#address-cells = <1>;
#size-cells = <0>;

72
qcom/pm6150l.dtsi
View File

@@ -20,11 +20,8 @@
#address-cells = <1>;
#size-cells = <0>;
pm6150l_revid: qcom,revid@100 {
reg = <0x100>;
};
qcom,power-on@800 {
compatible = "qcom,qpnp-power-on";
reg = <0x800>;
};
@@ -124,45 +121,15 @@
pm6150l_pwm_1: qcom,pwms@bc00 {
status = "disabled";
compatible = "qcom,pwm-lpg";
reg = <0xbc00>;
reg-names = "lpg-base";
qcom,num-lpg-channels = <1>;
#pwm-cells = <2>;
};
pm6150l_lcdb: qcom,lcdb@ec00 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0xec00>;
interrupts = <0x5 0xec 0x1 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "sc-irq";
qcom,pmic-revid = <&pm6150l_revid>;
qcom,voltage-step-ramp;
status = "disabled";
lcdb_ldo_vreg: ldo {
label = "ldo";
regulator-name = "lcdb_ldo";
regulator-min-microvolt = <4000000>;
regulator-max-microvolt = <6000000>;
};
lcdb_ncp_vreg: ncp {
label = "ncp";
regulator-name = "lcdb_ncp";
regulator-min-microvolt = <4000000>;
regulator-max-microvolt = <6000000>;
};
lcdb_bst_vreg: bst {
label = "bst";
regulator-name = "lcdb_bst";
regulator-min-microvolt = <4700000>;
regulator-max-microvolt = <6275000>;
};
};
flash_led: qcom,leds@d300 {
compatible = "qcom,pm6150l-flash-led-v2";
status = "disabled";
reg = <0xd300>;
label = "flash";
@@ -179,7 +146,6 @@
qcom,thermal-derate-en;
qcom,thermal-derate-current = <200 500 1000>;
qcom,isc-delay = <192>;
qcom,pmic-revid = <&pm6150l_revid>;
pm6150l_flash0: qcom,flash_0 {
label = "flash";
@@ -280,36 +246,8 @@
};
};
pm6150l_wled: qcom,wled@d800 {
reg = <0xd800>, <0xd900>;
reg-names = "wled-ctrl-base", "wled-sink-base";
label = "backlight";
interrupts = <0x5 0xd8 0x1 IRQ_TYPE_EDGE_RISING>,
<0x5 0xd8 0x4 IRQ_TYPE_EDGE_BOTH>,
<0x5 0xd8 0x5 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "ovp-irq", "pre-flash-irq",
"flash-irq";
qcom,auto-calibration;
status = "disabled";
wled_flash: qcom,wled-flash {
label = "flash";
qcom,default-led-trigger = "wled_flash";
};
wled_torch: qcom,wled-torch {
label = "torch";
qcom,default-led-trigger = "wled_torch";
qcom,wled-torch-timer = <1200>;
};
wled_switch: qcom,wled-switch {
label = "switch";
qcom,default-led-trigger = "wled_switch";
};
};
pm6150l_lpg: qcom,pwms@b100 {
compatible = "qcom,pwm-lpg";
reg = <0xb100>, <0xb000>;
reg-names = "lpg-base", "lut-base";
#pwm-cells = <2>;
@@ -351,6 +289,7 @@
};
pm6150l_rgb_led: qcom,leds@d000 {
compatible = "qcom,tri-led";
reg = <0xd000>;
red {
label = "red";
@@ -375,6 +314,7 @@
};
pm6150a_amoled: qcom,amoled {
compatible = "qcom,amoled-regulator";
status = "disabled";
oledb_vreg: oledb@e000 {

1
qcom/pm6450.dtsi
View File

@@ -36,6 +36,7 @@
pm6450_pwm_1: qcom,pwms@e800 {
status = "disabled";
compatible = "qcom,pwm-lpg";
reg = <0xe800>;
reg-names = "lpg-base";
qcom,num-lpg-channels = <1>;

2
qcom/pm7250b.dtsi
View File

@@ -21,6 +21,7 @@
#size-cells = <0>;
qcom,power-on@800 {
compatible = "qcom,qpnp-power-on";
reg = <0x800>;
};
@@ -199,6 +200,7 @@
#size-cells = <0>;
pm7250b_vib: qcom,vibrator@5300 {
compatible = "qcom,qpnp-vibrator-ldo";
reg = <0x5300>;
qcom,vib-ldo-volt-uv = <3000000>;
qcom,disable-overdrive;

1
qcom/pm8350b.dtsi
View File

@@ -180,6 +180,7 @@
};
pm8350b_amoled: qcom,amoled {
compatible = "qcom,amoled-regulator";
#address-cells = <1>;
#size-cells = <0>;

13
qcom/pmk8350.dtsi
View File

@@ -4,6 +4,7 @@
*/
#include <dt-bindings/input/input.h>
#include <dt-bindings/input/qcom,qpnp-power-on.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
#include <dt-bindings/iio/qcom,spmi-adc7-pm8350b.h>
@@ -25,16 +26,28 @@
#size-cells = <0>;
pon_pbs@800 {
compatible = "qcom,qpnp-power-on";
reg = <0x800>;
qcom,system-reset;
qcom,store-hard-reset-reason;
};
pmk8350_pon: pon_hlos@1300 {
compatible = "qcom,qpnp-power-on";
reg = <0x1300>;
interrupts = <0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>,
<0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "kpdpwr", "resin";
qcom,pon_1 {
qcom,pon-type = <PON_POWER_ON_TYPE_KPDPWR>;
linux,code = <KEY_POWER>;
};
qcom,pon_2 {
qcom,pon-type = <PON_POWER_ON_TYPE_RESIN>;
linux,code = <KEY_VOLUMEDOWN>;
};
};
pmk8350_vadc: vadc@3100 {