ARM: dts: msm: Add USB device nodes for tuna

Enable USB related properties for USB functionality
on tuna.

Change-Id: Ia4270aa4860d8b894ab094dafbad61d278f7606f
Signed-off-by: Uttkarsh Aggarwal <quic_uaggarwa@quicinc.com>

qcom/tuna-usb.dtsi

@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/clock/qcom,gcc-tuna.h>
+#include <dt-bindings/phy/qcom,usb3-4nm-qmp-combo.h>
+
+&soc {
+	usb0: ssusb@a600000 {
+		compatible = "qcom,dwc-usb3-msm";
+		reg = <0xa600000 0x100000>;
+		reg-names = "core_base";
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		USB3_GDSC-supply = <&gcc_usb30_prim_gdsc>;
+		clocks = <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+			<&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+			<&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+			<&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+			<&gcc GCC_USB30_PRIM_SLEEP_CLK>;
+		clock-names = "core_clk", "iface_clk", "bus_aggr_clk",
+					"utmi_clk", "sleep_clk";
+
+		resets = <&gcc GCC_USB30_PRIM_BCR>;
+		reset-names = "core_reset";
+
+		interrupts-extended = <&intc GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "pwr_event_irq";
+
+		qcom,core-clk-rate = <200000000>;
+		qcom,core-clk-rate-hs = <66666667>;
+		qcom,core-clk-rate-disconnected = <133333333>;
+
+		dwc3@a600000 {
+			compatible = "snps,dwc3";
+			reg = <0xa600000 0xd93c>;
+
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+			snps,disable-clk-gating;
+			snps,has-lpm-erratum;
+			snps,hird-threshold = /bits/ 8 <0x0>;
+			snps,is-utmi-l1-suspend;
+			snps,dis-u1-entry-quirk;
+			snps,dis-u2-entry-quirk;
+			snps,dis_u2_susphy_quirk;
+			snps,ssp-u3-u0-quirk;
+			tx-fifo-resize;
+			dr_mode = "otg";
+			maximum-speed = "super-speed-plus";
+			usb-role-switch;
+		};
+	};
+};