Merge d5e66b2439 on remote branch
Change-Id: I776d27c18715d66064a9421b318f83f273ac8bd9
This commit is contained in:
Linux Build Service Account
@@ -3,3 +3,9 @@ dtbo-$(CONFIG_ARCH_SUN) += sun-camera-sensor-mtp.dtbo \
|
||||
sun-camera-sensor-rumi.dtbo \
|
||||
sun-camera-sensor-cdp.dtbo \
|
||||
sun-camera-sensor-qrd.dtbo
|
||||
|
||||
dtbo-$(CONFIG_ARCH_TUNA) += tuna-camera.dtbo
|
||||
|
||||
dtbo-$(CONFIG_ARCH_TUNA) += tuna-camera-sensor-mtp.dtbo \
|
||||
tuna-camera-sensor-cdp.dtbo \
|
||||
tuna-camera-sensor-qrd.dtbo
|
||||
|
||||
22
tuna-camera-sensor-cdp.dts
Normal file
22
tuna-camera-sensor-cdp.dts
Normal file
@@ -0,0 +1,22 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/plugin/;
|
||||
|
||||
#include <dt-bindings/clock/qcom,gcc-tuna.h>
|
||||
#include <dt-bindings/clock/qcom,camcc-sun.h>
|
||||
#include <dt-bindings/clock/qcom,cambistmclkcc-sun.h>
|
||||
#include <dt-bindings/interconnect/qcom,tuna.h>
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include <dt-bindings/regulator/qcom,rpmh-regulator-levels.h>
|
||||
|
||||
#include "tuna-camera-sensor-mtp.dtsi"
|
||||
/ {
|
||||
model = "Qualcomm Technologies, Inc. Tuna CDP/RCM";
|
||||
compatible = "qcom,tuna-cdp", "qcom,tuna", "qcom,cdp", "qcom,rcm", "qcom,tuna-rcm";
|
||||
qcom,msm-id = <655 0x10000>, <655 0x20000>, <681 0x10000>, <681 0x20000>;
|
||||
qcom,board-id = <1 0>, <21 0>, <21 1>;
|
||||
};
|
||||
22
tuna-camera-sensor-mtp.dts
Normal file
22
tuna-camera-sensor-mtp.dts
Normal file
@@ -0,0 +1,22 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/plugin/;
|
||||
|
||||
#include <dt-bindings/clock/qcom,gcc-tuna.h>
|
||||
#include <dt-bindings/clock/qcom,camcc-sun.h>
|
||||
#include <dt-bindings/clock/qcom,cambistmclkcc-sun.h>
|
||||
#include <dt-bindings/interconnect/qcom,tuna.h>
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include <dt-bindings/regulator/qcom,rpmh-regulator-levels.h>
|
||||
|
||||
#include "tuna-camera-sensor-mtp.dtsi"
|
||||
/ {
|
||||
model = "Qualcomm Technologies, Inc. Tuna MTP";
|
||||
compatible = "qcom,tuna-mtp", "qcom,tuna", "qcom,tunap-mtp", "qcom,tunap", "qcom,mtp";
|
||||
qcom,msm-id = <655 0x10000>, <655 0x20000>, <681 0x10000>, <681 0x20000>;
|
||||
qcom,board-id = <8 0>, <8 1>, <8 2>, <8 3>, <8 4>;
|
||||
};
|
||||
414
tuna-camera-sensor-mtp.dtsi
Normal file
414
tuna-camera-sensor-mtp.dtsi
Normal file
@@ -0,0 +1,414 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/msm-camera.h>
|
||||
&soc {
|
||||
led_flash_triple_rear_wide: qcom,camera-flash1 {
|
||||
cell-index = <1>;
|
||||
compatible = "qcom,camera-flash";
|
||||
flash-source = <&pmxr2230_flash0 &pmxr2230_flash1>;
|
||||
torch-source = <&pmxr2230_torch0 &pmxr2230_torch1>;
|
||||
switch-source = <&pmxr2230_switch2>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
led_flash_triple_rear_ultrawide: qcom,camera-flash2 {
|
||||
cell-index = <2>;
|
||||
compatible = "qcom,camera-flash";
|
||||
flash-source = <&pmxr2230_flash0 &pmxr2230_flash1>;
|
||||
torch-source = <&pmxr2230_torch0 &pmxr2230_torch1>;
|
||||
switch-source = <&pmxr2230_switch2>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
led_flash_triple_rear_tele: qcom,camera-flash3 {
|
||||
cell-index = <3>;
|
||||
compatible = "qcom,camera-flash";
|
||||
flash-source = <&pmxr2230_flash0 &pmxr2230_flash1>;
|
||||
torch-source = <&pmxr2230_torch0 &pmxr2230_torch1>;
|
||||
switch-source = <&pmxr2230_switch2>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
qcom,cam-res-mgr {
|
||||
compatible = "qcom,cam-res-mgr";
|
||||
status = "ok";
|
||||
};
|
||||
};
|
||||
|
||||
&cam_cci0 {
|
||||
actuator_triple_wide: qcom,actuator2 {
|
||||
cell-index = <2>;
|
||||
compatible = "qcom,actuator";
|
||||
cci-master = <CCI_MASTER_0>;
|
||||
cam_vaf-supply = <&L7M>;
|
||||
regulator-names = "cam_vaf";
|
||||
rgltr-cntrl-support;
|
||||
rgltr-min-voltage = <2800000>;
|
||||
rgltr-max-voltage = <3000000>;
|
||||
rgltr-load-current = <103000>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
actuator_triple_uw: qcom,actuator1 {
|
||||
cell-index = <1>;
|
||||
compatible = "qcom,actuator";
|
||||
cci-master = <CCI_MASTER_1>;
|
||||
cam_vaf-supply = <&L7M>;
|
||||
regulator-names = "cam_vaf";
|
||||
rgltr-cntrl-support;
|
||||
rgltr-min-voltage = <2800000>;
|
||||
rgltr-max-voltage = <3000000>;
|
||||
rgltr-load-current = <103360>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
ois_wide: qcom,ois0 {
|
||||
cell-index = <2>;
|
||||
compatible = "qcom,ois";
|
||||
cci-master = <CCI_MASTER_0>;
|
||||
cam_vio-supply = <&L5N>;
|
||||
cam_vaf-supply = <&L7M>;
|
||||
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
|
||||
regulator-names = "cam_vio","cam_vaf", "cam_clk";
|
||||
rgltr-cntrl-support;
|
||||
rgltr-min-voltage = <1800000 2800000 0>;
|
||||
rgltr-max-voltage = <1980000 3000000 0>;
|
||||
rgltr-load-current = <3500 214290 0>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
eeprom_wide: qcom,eeprom2 {
|
||||
cell-index = <2>;
|
||||
compatible = "qcom,eeprom";
|
||||
cam_vio-supply = <&L5N>;
|
||||
cam_vdig-supply = <&L1N>;
|
||||
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
|
||||
cam_vana-supply = <&L6M>;
|
||||
cam_vaf-supply = <&L7M>;
|
||||
cam_v_custom1-supply = <&L3N>;
|
||||
regulator-names = "cam_vio", "cam_vdig", "cam_clk", "cam_vana",
|
||||
"cam_vaf", "cam_v_custom1";
|
||||
rgltr-cntrl-support;
|
||||
rgltr-min-voltage = <1800000 1104000 0 2800000 2800000 1800000>;
|
||||
rgltr-max-voltage = <1980000 1200000 0 2900000 3000000 1900000>;
|
||||
rgltr-load-current = <3500 913200 0 91430 103000 63100>;
|
||||
gpio-no-mux = <0>;
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_sensor_mclk0_active
|
||||
&cam_sensor_active_rst0>;
|
||||
pinctrl-1 = <&cam_sensor_mclk0_suspend
|
||||
&cam_sensor_suspend_rst0>;
|
||||
gpios = <&tlmm 64 0>,
|
||||
<&tlmm 37 0>;
|
||||
gpio-reset = <1>;
|
||||
gpio-req-tbl-num = <0 1>;
|
||||
gpio-req-tbl-flags = <1 0>;
|
||||
gpio-req-tbl-label = "CAMIF_MCLK0",
|
||||
"CAM_RESET0";
|
||||
cci-master = <CCI_MASTER_0>;
|
||||
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK0_CLK>;
|
||||
clock-names = "cam_clk";
|
||||
clock-cntl-level = "nominal";
|
||||
clock-rates = <24000000>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
eeprom_uw: qcom,eeprom1 {
|
||||
cell-index = <1>;
|
||||
compatible = "qcom,eeprom";
|
||||
cam_vio-supply = <&L5N>;
|
||||
cam_vdig-supply = <&L1M>;
|
||||
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
|
||||
cam_vana-supply = <&L3M>;
|
||||
cam_vaf-supply = <&L7M>;
|
||||
regulator-names = "cam_vio", "cam_vdig", "cam_clk", "cam_vana",
|
||||
"cam_vaf";
|
||||
rgltr-cntrl-support;
|
||||
rgltr-min-voltage = <1800000 1104000 0 2800000 2800000>;
|
||||
rgltr-max-voltage = <1980000 1200000 0 2900000 3000000>;
|
||||
rgltr-load-current = <4060 523640 0 107500 103360>;
|
||||
gpio-no-mux = <0>;
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_sensor_mclk1_active
|
||||
&cam_sensor_active_rst1>;
|
||||
pinctrl-1 = <&cam_sensor_mclk1_suspend
|
||||
&cam_sensor_suspend_rst1>;
|
||||
gpios = <&tlmm 65 0>,
|
||||
<&tlmm 28 0>;
|
||||
gpio-reset = <1>;
|
||||
gpio-req-tbl-num = <0 1>;
|
||||
gpio-req-tbl-flags = <1 0>;
|
||||
gpio-req-tbl-label = "CAMIF_MCLK1",
|
||||
"CAM_RESET1";
|
||||
cci-master = <CCI_MASTER_1>;
|
||||
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK1_CLK>;
|
||||
clock-names = "cam_clk";
|
||||
clock-cntl-level = "nominal";
|
||||
clock-rates = <24000000>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
/* IMX766 + OIS (Wide) */
|
||||
qcom,cam-sensor2 {
|
||||
cell-index = <2>;
|
||||
compatible = "qcom,cam-sensor";
|
||||
csiphy-sd-index = <0>;
|
||||
sensor-position-roll = <90>;
|
||||
sensor-position-pitch = <0>;
|
||||
sensor-position-yaw = <180>;
|
||||
eeprom-src = <&eeprom_wide>;
|
||||
ois-src = <&ois_wide>;
|
||||
actuator-src = <&actuator_triple_wide>;
|
||||
led-flash-src = <&led_flash_triple_rear_wide>;
|
||||
cam_vio-supply = <&L5N>;
|
||||
cam_vdig-supply = <&L1N>;
|
||||
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
|
||||
cam_vana-supply = <&L6M>;
|
||||
cam_vaf-supply = <&L7M>;
|
||||
cam_v_custom1-supply = <&L3N>;
|
||||
regulator-names = "cam_vio", "cam_vdig", "cam_clk", "cam_vana",
|
||||
"cam_vaf", "cam_v_custom1";
|
||||
rgltr-cntrl-support;
|
||||
rgltr-min-voltage = <1800000 1104000 0 2800000 2800000 1800000>;
|
||||
rgltr-max-voltage = <1980000 1200000 0 2900000 3000000 1900000>;
|
||||
rgltr-load-current = <3500 913200 0 91430 103000 63100>;
|
||||
gpio-no-mux = <0>;
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_sensor_mclk0_active
|
||||
&cam_sensor_active_rst0>;
|
||||
pinctrl-1 = <&cam_sensor_mclk0_suspend
|
||||
&cam_sensor_suspend_rst0>;
|
||||
gpios = <&tlmm 64 0>,
|
||||
<&tlmm 37 0>;
|
||||
gpio-reset = <1>;
|
||||
gpio-req-tbl-num = <0 1>;
|
||||
gpio-req-tbl-flags = <1 0>;
|
||||
gpio-req-tbl-label = "CAMIF_MCLK0",
|
||||
"CAM_RESET0";
|
||||
cci-master = <CCI_MASTER_0>;
|
||||
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK0_CLK>;
|
||||
clock-names = "cam_clk";
|
||||
clock-cntl-level = "nominal";
|
||||
clock-rates = <24000000>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
/* IMX858 (UWide) */
|
||||
qcom,cam-sensor1 {
|
||||
cell-index = <1>;
|
||||
compatible = "qcom,cam-sensor";
|
||||
csiphy-sd-index = <1>;
|
||||
sensor-position-roll = <90>;
|
||||
sensor-position-pitch = <0>;
|
||||
sensor-position-yaw = <180>;
|
||||
eeprom-src = <&eeprom_uw>;
|
||||
actuator-src = <&actuator_triple_uw>;
|
||||
led-flash-src = <&led_flash_triple_rear_ultrawide>;
|
||||
cam_vio-supply = <&L5N>;
|
||||
cam_vdig-supply = <&L1M>;
|
||||
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
|
||||
cam_vana-supply = <&L3M>;
|
||||
cam_vaf-supply = <&L7M>;
|
||||
regulator-names = "cam_vio", "cam_vdig", "cam_clk", "cam_vana",
|
||||
"cam_vaf";
|
||||
rgltr-cntrl-support;
|
||||
rgltr-min-voltage = <1800000 1104000 0 2800000 2800000>;
|
||||
rgltr-max-voltage = <1980000 1200000 0 2900000 3000000>;
|
||||
rgltr-load-current = <4060 523640 0 107500 103360>;
|
||||
gpio-no-mux = <0>;
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_sensor_mclk1_active
|
||||
&cam_sensor_active_rst1>;
|
||||
pinctrl-1 = <&cam_sensor_mclk1_suspend
|
||||
&cam_sensor_suspend_rst1>;
|
||||
gpios = <&tlmm 65 0>,
|
||||
<&tlmm 28 0>;
|
||||
gpio-reset = <1>;
|
||||
gpio-req-tbl-num = <0 1>;
|
||||
gpio-req-tbl-flags = <1 0>;
|
||||
gpio-req-tbl-label = "CAMIF_MCLK1",
|
||||
"CAM_RESET1";
|
||||
cci-master = <CCI_MASTER_1>;
|
||||
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK1_CLK>;
|
||||
clock-names = "cam_clk";
|
||||
clock-cntl-level = "nominal";
|
||||
clock-rates = <24000000>;
|
||||
status = "ok";
|
||||
};
|
||||
};
|
||||
|
||||
&cam_cci1 {
|
||||
actuator_triple_tele: qcom,actuator3{
|
||||
cell-index = <3>;
|
||||
compatible = "qcom,actuator";
|
||||
cci-master = <CCI_MASTER_0>;
|
||||
cam_vaf-supply = <&L7M>;
|
||||
regulator-names = "cam_vaf";
|
||||
rgltr-cntrl-support;
|
||||
rgltr-min-voltage = <2800000>;
|
||||
rgltr-max-voltage = <3000000>;
|
||||
rgltr-load-current = <103040>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
eeprom_tele: qcom,eeprom3 {
|
||||
cell-index = <3>;
|
||||
compatible = "qcom,eeprom";
|
||||
cam_vio-supply = <&L5N>;
|
||||
cam_vdig-supply = <&L2M>;
|
||||
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
|
||||
cam_vana-supply = <&L4M>;
|
||||
cam_vaf-supply = <&L7M>;
|
||||
regulator-names = "cam_vio", "cam_vdig", "cam_clk",
|
||||
"cam_vana", "cam_vaf";
|
||||
rgltr-cntrl-support;
|
||||
rgltr-min-voltage = <1800000 1056000 0 2800000 2800000>;
|
||||
rgltr-max-voltage = <1980000 1150000 0 2900000 3000000>;
|
||||
rgltr-load-current = <4500 266330 0 69000 103040>;
|
||||
gpio-no-mux = <0>;
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_sensor_mclk3_active
|
||||
&cam_sensor_active_rst2>;
|
||||
pinctrl-1 = <&cam_sensor_mclk3_suspend
|
||||
&cam_sensor_suspend_rst2>;
|
||||
gpios = <&tlmm 67 0>,
|
||||
<&tlmm 180 0>;
|
||||
gpio-reset = <1>;
|
||||
gpio-req-tbl-num = <0 1>;
|
||||
gpio-req-tbl-flags = <1 0>;
|
||||
gpio-req-tbl-label = "CAMIF_MCLK3",
|
||||
"CAM_RESET2";
|
||||
cci-master = <CCI_MASTER_0>;
|
||||
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK3_CLK>;
|
||||
clock-names = "cam_clk";
|
||||
clock-cntl-level = "nominal";
|
||||
clock-rates = <24000000>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
/* JN1 (Tele) */
|
||||
qcom,cam-sensor3 {
|
||||
cell-index = <3>;
|
||||
compatible = "qcom,cam-sensor";
|
||||
csiphy-sd-index = <3>;
|
||||
sensor-position-roll = <90>;
|
||||
sensor-position-pitch = <0>;
|
||||
sensor-position-yaw = <180>;
|
||||
eeprom-src = <&eeprom_tele>;
|
||||
actuator-src = <&actuator_triple_tele>;
|
||||
led-flash-src = <&led_flash_triple_rear_tele>;
|
||||
cam_vio-supply = <&L5N>;
|
||||
cam_vdig-supply = <&L2M>;
|
||||
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
|
||||
cam_vana-supply = <&L4M>;
|
||||
cam_vaf-supply = <&L7M>;
|
||||
regulator-names = "cam_vio", "cam_vdig", "cam_clk",
|
||||
"cam_vana", "cam_vaf";
|
||||
rgltr-cntrl-support;
|
||||
rgltr-min-voltage = <1800000 1056000 0 2800000 2800000>;
|
||||
rgltr-max-voltage = <1980000 1150000 0 2900000 3000000>;
|
||||
rgltr-load-current = <4500 266330 0 69000 103040>;
|
||||
gpio-no-mux = <0>;
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_sensor_mclk3_active
|
||||
&cam_sensor_active_rst2>;
|
||||
pinctrl-1 = <&cam_sensor_mclk3_suspend
|
||||
&cam_sensor_suspend_rst2>;
|
||||
gpios = <&tlmm 67 0>,
|
||||
<&tlmm 180 0>;
|
||||
gpio-reset = <1>;
|
||||
gpio-req-tbl-num = <0 1>;
|
||||
gpio-req-tbl-flags = <1 0>;
|
||||
gpio-req-tbl-label = "CAMIF_MCLK3",
|
||||
"CAM_RESET2";
|
||||
cci-master = <CCI_MASTER_0>;
|
||||
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK3_CLK>;
|
||||
clock-names = "cam_clk";
|
||||
clock-cntl-level = "nominal";
|
||||
clock-rates = <24000000>;
|
||||
status = "ok";
|
||||
};
|
||||
};
|
||||
|
||||
&qupv3_se8_i2c {
|
||||
status = "ok";
|
||||
qcom,high-perf;
|
||||
qcom,clk-freq-out = <1000000>;
|
||||
qcom,pm-ctrl-client;
|
||||
|
||||
eeprom_asc_front: qcom,eeprom1 {
|
||||
cell-index = <4>;
|
||||
reg = <0x58>;
|
||||
compatible = "qcom,cam-i2c-eeprom";
|
||||
cam_vio-supply = <&L5N>;
|
||||
cam_vdig-supply = <&L2N>;
|
||||
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
|
||||
cam_vana-supply = <&L6N>;
|
||||
regulator-names = "cam_vio", "cam_vdig","cam_clk", "cam_vana";
|
||||
rgltr-cntrl-support;
|
||||
rgltr-min-voltage = <1800000 1104000 0 2800000>;
|
||||
rgltr-max-voltage = <1980000 1150000 0 2900000>;
|
||||
rgltr-load-current = <3560 283910 0 50360>;
|
||||
gpio-no-mux = <0>;
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_sensor_mclk4_active
|
||||
&cam_sensor_active_rst3>;
|
||||
pinctrl-1 = <&cam_sensor_mclk4_suspend
|
||||
&cam_sensor_suspend_rst3>;
|
||||
gpios = <&tlmm 68 0>,
|
||||
<&tlmm 3 0>;
|
||||
gpio-reset = <1>;
|
||||
gpio-req-tbl-num = <0 1>;
|
||||
gpio-req-tbl-flags = <1 0>;
|
||||
gpio-req-tbl-label = "CAMIF_MCLK4",
|
||||
"CAM_RESET3";
|
||||
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK4_CLK>;
|
||||
clock-names = "cam_clk";
|
||||
clock-cntl-level = "nominal";
|
||||
clock-rates = <24000000>;
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
/* OV32C4C + ASC (Front) */
|
||||
qcom,cam-sensor1 {
|
||||
cell-index = <4>;
|
||||
reg = <0x22>;
|
||||
compatible = "qcom,cam-i2c-sensor";
|
||||
csiphy-sd-index = <4>;
|
||||
sensor-position-roll = <90>;
|
||||
sensor-position-pitch = <0>;
|
||||
sensor-position-yaw = <0>;
|
||||
eeprom-src = <&eeprom_asc_front>;
|
||||
cam_vio-supply = <&L5N>;
|
||||
cam_vdig-supply = <&L2N>;
|
||||
cam_clk-supply = <&cam_cc_titan_top_gdsc>;
|
||||
cam_vana-supply = <&L6N>;
|
||||
regulator-names = "cam_vio", "cam_vdig","cam_clk", "cam_vana";
|
||||
rgltr-cntrl-support;
|
||||
aon-camera-id = <AON_CAM1>;
|
||||
rgltr-min-voltage = <1800000 1104000 0 2800000>;
|
||||
rgltr-max-voltage = <1980000 1150000 0 2900000>;
|
||||
rgltr-load-current = <3560 283910 0 50360>;
|
||||
gpio-no-mux = <0>;
|
||||
pinctrl-names = "cam_default", "cam_suspend";
|
||||
pinctrl-0 = <&cam_sensor_mclk4_active
|
||||
&cam_sensor_active_rst3>;
|
||||
pinctrl-1 = <&cam_sensor_mclk4_suspend
|
||||
&cam_sensor_suspend_rst3>;
|
||||
gpios = <&tlmm 68 0>,
|
||||
<&tlmm 3 0>;
|
||||
gpio-reset = <1>;
|
||||
gpio-req-tbl-num = <0 1>;
|
||||
gpio-req-tbl-flags = <1 0>;
|
||||
gpio-req-tbl-label = "CAMIF_MCLK4",
|
||||
"CAM_RESET3";
|
||||
clocks = <&cambistmclkcc CAM_BIST_MCLK_CC_MCLK4_CLK>;
|
||||
clock-names = "cam_clk";
|
||||
clock-cntl-level = "nominal";
|
||||
clock-rates = <24000000>;
|
||||
status = "ok";
|
||||
};
|
||||
};
|
||||
22
tuna-camera-sensor-qrd.dts
Normal file
22
tuna-camera-sensor-qrd.dts
Normal file
@@ -0,0 +1,22 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/plugin/;
|
||||
|
||||
#include <dt-bindings/clock/qcom,gcc-tuna.h>
|
||||
#include <dt-bindings/clock/qcom,camcc-sun.h>
|
||||
#include <dt-bindings/clock/qcom,cambistmclkcc-sun.h>
|
||||
#include <dt-bindings/interconnect/qcom,tuna.h>
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include <dt-bindings/regulator/qcom,rpmh-regulator-levels.h>
|
||||
|
||||
#include "tuna-camera-sensor-mtp.dtsi"
|
||||
/ {
|
||||
model = "Qualcomm Technologies, Inc. Tuna QRD";
|
||||
compatible = "qcom,tuna-qrd", "qcom,tuna", "qcom,qrd", "qcom,rcm", "qcom,tuna-rcm";
|
||||
qcom,msm-id = <655 0x10000>, <655 0x20000>, <681 0x10000>, <681 0x20000>, <694 0x10000>, <694 0x20000>;
|
||||
qcom,board-id = <11 0>;
|
||||
};
|
||||
22
tuna-camera.dts
Normal file
22
tuna-camera.dts
Normal file
@@ -0,0 +1,22 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/plugin/;
|
||||
|
||||
#include <dt-bindings/clock/qcom,gcc-tuna.h>
|
||||
#include <dt-bindings/clock/qcom,camcc-sun.h>
|
||||
#include <dt-bindings/interconnect/qcom,tuna.h>
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include <dt-bindings/regulator/qcom,rpmh-regulator-levels.h>
|
||||
|
||||
#include "tuna-camera.dtsi"
|
||||
/ {
|
||||
model = "Qualcomm Technologies, Inc. Tuna SoC";
|
||||
compatible = "qcom,tuna";
|
||||
qcom,msm-id = <655 0x10000>, <655 0x20000>, <681 0x10000>, <681 0x20000>,
|
||||
<694 0x10000>, <694 0x20000>;
|
||||
qcom,board-id = <0 0>;
|
||||
};
|
||||
2829
tuna-camera.dtsi
Normal file
2829
tuna-camera.dtsi
Normal file
File diff suppressed because it is too large
Load Diff
Reference in New Issue
Block a user