###############################################################################
#                          Extended CofigID
#WTX_COUNT_CONFIG           E403
#DPD_ENTRY_TIMEOUT          E404
#ANTENNA_RX_IDX_DEFINE      E460
#ANTENNA_RX_PAIR_DEFINE     E462
#ANTENNA_TX_IDX_DEFINE      E463
#ANTENNAS_CONFIGURATION_RX  E465
#CCC_DEBUG_INFO_CFG         E466
##Note: CCC_DEBUG_INFO_CFG disabled by default, if required add the
  ##      config (E4, 66, 04, 00, 00, 00, 00) and update the
  ##      number of parameter accordingly in the header part.
#CLK_CONFIG_CTRL            E43A
#DDFS_CONFIG_PER_PULSE_SHAPE  E43B
#Note: Config for clock source selection and refer UCI specification
#      for more information.

UWB_CORE_EXT_DEVICE_DEFAULT_CONFIG={06,
    E4, 03, 01, B4,
    E4, 04, 02, C8, 00,
    E4, 60, 0D, 02, 01, 03, 00, 00, 00, 00, 02, 02, 00, 00, 00, 00,
    E4, 63, 07, 01, 01, 02, 00, 00, 00, 00,
    E4, 3A, 05, 00, E8, 03, E8, 03,
    E4, 33, 01, 01
}


# Set system time uncertainty value in microsec for CCC ranging
UWB_INITIATION_TIME_DELTA=200000

#LIST OF UWB CAPABILITY INFO NOT RECEIVED FROM UWBS
# mapping device caps according to Fira 2.0
# TODO: Remove once FW support available
UWB_VENDOR_CAPABILITY={ A7, 04, 01, 00, 00, 00,
  A8, 04, 08, 00, 00, 00,
  AB, 02, 64, 00,
  E3, 01, 01,
  E4, 04, 64, 00, 00, 00,
  E5, 04, 03, 00, 00, 00,
  E6, 01, 01,
  E7, 01, 01,
  E8, 04, B0, 04, 00, 00,
  E9, 04, 08, 00, 00, 00,
  EA, 02, 09, 00
}

# This config enable/disable the Vendor extended notifications
# 00 for disable
# 01 for enable
# NXP_UWB_EXTENDED_NTF_CONFIG={20, 04, 00, 05, 01, E4, 33, 01, 01}

# This config enable/disable the dpd entry prevention ntf config during init
# 00 for disable
# 01 for enable
UWB_DPD_ENTRY_PREVENTION_NTF_CONFIG=0x01
COUNTRY_CODE_CAP_FILE_LOCATION={"vendor/etc/", "data/vendor/uwb/scpm/"}

##Note: Below configs are applicable in User_Mode FW only
#WIFI_COEX_FEATURE  0xF0
##Note: WIFI_COEX_FEATURE is disabled by default.
  ##  Based on requirement add the below configs:
  ##  Enable CH5 - (F0, 06, 01, 01, 05, 3C, 1E, 1E)
  ##  Enable CH9 - (F0, 06, 01, 01, 09, 3C, 1E, 1E)
  ##  Enable both CH5 and CH9 - (F0, 0A, 01, 02, 05, 3C, 1E, 1E, 09, 3C, 1E, 1E)
  ##
  ##  Update the length and number of parameter accordingly in
  ##  the header part.
#DPD_WAKEUP_SRC    E4 02
#GPIO_USAGE_CONFIG E4 08
  ## Customer need to set the DPD_WAKEUP_SOURCE before applying the GPIO_USAGE_CONFIG command to
  ## enable time sync notification feature

UWB_USER_FW_BOOT_MODE_CONFIG={20, 04, 00, 0D, 02,
    F0, 06, 01, 01, 05, 1E, 32, 0F,
    E4, 02, 01, 00
}
###############################################################################
# Helios FW Name
# libsr200t_fw.bin to download FW from bin file
# libsr200t_fw.so  to download FW from so file
NXP_UWB_FW_FILENAME="libsr200t_prod_fw.so"
###############################################################################

###############################################################################
#enable or disable fw download logging
UWB_FW_DOWNLOAD_LOG=0x00
###############################################################################

###############################################################################
#enable or disable delete ursk for ccc session
DELETE_URSK_FOR_CCC_SESSION=0x00
###############################################################################

###############################################################################
#enable or disable sts index overriding for ccc session
OVERRIDE_STS_INDEX_FOR_CCC_SESSION=0x01
###############################################################################

###############################################################################
# FW FLASH update Options Configurations
# FLASH_UPPER_VERSION 0x01
# FLASH_ALWAYS 0x02
  ## Lower Major Version is Not Possible
# FLASH_DIFFERENT_VERSION  0x03
  ## Same Version is Not Possible
NXP_UWB_FLASH_CONFIG=0x03
###############################################################################

###############################################################################
# Platform ID Max size can be upto 16 Bytes
PLATFORM_ID="SAMSUNG-SECCALIB"
###############################################################################

###############################################################################
# set Crystal calibration seetings
# byte[8-9]   38.4 MHz XTAL CAP1
# byte[10-11] 38.4 MHz XTAL CAP2
# byte[12-13] 38.4 MHz XTAL GM
NXP_UWB_XTAL_38MHZ_CONFIG={2F, 21, 00, 0A, 05, 01, 07, 03, 24, 00, 24, 00, 04, 00}

###############################################################################
# Core Device configurations
# Below sections needs to be updated with the correct values for needed core device configurations

NXP_CORE_CONF_BLK_1={2F, 21, 00, 0A, 05, 02, 07, 02, 01, 50, 48, 02, 50, 48}

NXP_CORE_CONF_BLK_2={2F, 21, 00, 0A, 09, 02, 07, 02, 01, 1C, 48, 02, 1C, 48}

#NXP_CORE_CONF_BLK_3={}

#NXP_CORE_CONF_BLK_4={}

#NXP_CORE_CONF_BLK_5={}

#NXP_CORE_CONF_BLK_6={}

NXP_CORE_CONF_BLK_7={2F, 21, 00, 0D, 05, 67, 0A, 01, 01, 00, 00, 2D, 00, 41, 06, 7F, 0C}

NXP_CORE_CONF_BLK_8={2F, 21, 00, 0D, 09, 67, 0A, 01, 01, 00, 00, 2D, 00, 41, 06, 7F, 0E}

#NXP_CORE_CONF_BLK_9={}

#NXP_CORE_CONF_BLK_10={}

###############################################################################
# Below sections needs to be updated with the correct values for needed  Secure device configurations
# XTAL_38MHZ_CONFIG for SECURE CAL
NXP_SECURE_CONFIG_BLK_1={2F, 23, 00, 1D, 05, 02, 03, 24, 00, 24, 00, 04, 00, 00, 00, 00, 00, 90, 79, DB, 1B, 6F, AD, 1C, 8A, 70, 5F, E3, E9, C5, CC, 39, 87}

# RX_DELAY_CAL_CH5 for SECURE CAL
NXP_SECURE_CONFIG_BLK_2={2F, 23, 00, 1D, 05, 0F, 02, 01, 50, 48, 02, 50, 48, 00, 00, 00, 00, 3A, 2F, E9, 19, 3D, D9, 28, 7B, F9, 08, F2, 8B, 5D, 94, 2A, 95}

# RX_DELAY_CAL_CH9 for SECURE CAL
NXP_SECURE_CONFIG_BLK_3={2F, 23, 00, 1D, 09, 0F, 02, 01, 1C, 48, 02, 1C, 48, 00, 00, 00, 00, 5F, 6C, CD, B2, BE, 74, A9, C6, 0E, F9, 01, 03, A9, 3F, C6, 04}

#NXP_SECURE_CONFIG_BLK_4={}

#NXP_SECURE_CONFIG_BLK_5={}

#NXP_SECURE_CONFIG_BLK_6={}

#NXP_SECURE_CONFIG_BLK_7={}

#NXP_SECURE_CONFIG_BLK_8={}

#NXP_SECURE_CONFIG_BLK_9={}

#NXP_SECURE_CONFIG_BLK_10={}

###############################################################################
#set log levels for each modules.
#ANDROID_LOG_ERROR 0x01
#ANDROID_LOG_WARN 0x02
#ANDROID_LOG_INFO 0x03
#ANDROID_LOG_DEBUG 0x04
###############################################################################

NXP_LOG_JNI_LOGLEVEL=0x01
NXP_LOG_UCI_CORE_LOGLEVEL=0x01
NXP_LOG_UCIHAL_LOGLEVEL=0x01
NXP_LOG_FWDNLD_LOGLEVEL=0x01
NXP_LOG_TML_LOGLEVEL=0x01
NXP_LOG_UCIX_LOGLEVEL=0x04
NXP_LOG_UCIR_LOGLEVEL=0x04
NXP_LOG_EXTNS_LOGLEVEL=0x01
###############################################################################
#enable or disable uwb uci debug logging to file
#0x00 - Disables writing log to file
#0x01 - Enable log
UWB_UCIX_UCIR_ERROR_LOG=0x01
###############################################################################
#Size of uwb uci debug log file
#Max value is 1MB
#Less than 100kb restricted data printed in file
#Define values in bytes 50kb - 50000
UWB_DEBUG_LOG_FILE_SIZE=1000000