David Wronek
@@ -5,6 +5,8 @@
|
||||
#
|
||||
|
||||
BUILD_BROKEN_DUP_RULES := true
|
||||
#BUILD_BROKEN_ELF_PREBUILT_PRODUCT_COPY_FILES := true
|
||||
#BUILD_BROKEN_INCORRECT_PARTITION_IMAGES := true
|
||||
|
||||
DEVICE_PATH := device/samsung/e3q
|
||||
|
||||
@@ -68,17 +70,29 @@ BOARD_MKBOOTIMG_INIT_ARGS += --header_version $(BOARD_INIT_BOOT_HEADER_VERSION)
|
||||
|
||||
# Kernel
|
||||
BOARD_KERNEL_CMDLINE := \
|
||||
ignore_loglevel \
|
||||
debug \
|
||||
androidboot.hardware=qcom \
|
||||
androidboot.memcg=1 \
|
||||
androidboot.usbcontroller=a600000.dwc3 \
|
||||
androidboot.load_modules_parallel=false \
|
||||
androidboot.hypervisor.protected_vm.supported=true \
|
||||
androidboot.selinux=permissive \
|
||||
aosp_is_booting \
|
||||
firmware_class.path=/vendor/firmware_mnt/image \
|
||||
loop.max_part=7 \
|
||||
printk.devkmsg=on \
|
||||
video=vfb:640x400,bpp=32,memsize=3072000 \
|
||||
audit=0
|
||||
|
||||
BOARD_BOOTCONFIG := \
|
||||
androidboot.hardware=qcom \
|
||||
androidboot.memcg=1 \
|
||||
androidboot.usbcontroller=a600000.dwc3 \
|
||||
androidboot.load_modules_parallel=false \
|
||||
androidboot.hypervisor.protected_vm.supported=true \
|
||||
androidboot.selinux=permissive
|
||||
|
||||
BOARD_KERNEL_IMAGE_NAME := Image
|
||||
BOARD_KERNEL_BASE := 0x00000000
|
||||
BOARD_KERNEL_PAGESIZE := 4096
|
||||
@@ -139,9 +153,6 @@ TARGET_KERNEL_EXT_MODULES := \
|
||||
BOARD_USES_METADATA_PARTITION := true
|
||||
|
||||
# Partitions
|
||||
-include vendor/lineage/config/BoardConfigReservedSize.mk
|
||||
BOARD_PRODUCTIMAGE_MINIMAL_PARTITION_RESERVED_SIZE := false
|
||||
|
||||
BOARD_FLASH_BLOCK_SIZE := 262144 # (BOARD_KERNEL_PAGESIZE * 64)
|
||||
BOARD_BOOTIMAGE_PARTITION_SIZE := 100663296
|
||||
BOARD_CACHEIMAGE_PARTITION_SIZE := 367001600
|
||||
@@ -268,7 +279,6 @@ WIFI_DRIVER_DEFAULT := qca_cld3
|
||||
WIFI_DRIVER_STATE_CTRL_PARAM := "/dev/wlan"
|
||||
WIFI_DRIVER_STATE_OFF := "OFF"
|
||||
WIFI_DRIVER_STATE_ON := "ON"
|
||||
WIFI_HIDL_FEATURE_AWARE := true
|
||||
WIFI_HIDL_FEATURE_DUAL_INTERFACE := true
|
||||
WIFI_HIDL_UNIFIED_SUPPLICANT_SERVICE_RC_ENTRY := true
|
||||
WPA_SUPPLICANT_VERSION := VER_0_8_X
|
||||
|
||||
@@ -21,36 +21,7 @@
|
||||
Changes from Qualcomm Innovation Center are provided under the following license:
|
||||
|
||||
Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
|
||||
Redistribution and use in source and binary forms, with or without
|
||||
modification, are permitted (subject to the limitations in the
|
||||
disclaimer below) provided that the following conditions are met:
|
||||
|
||||
* Redistributions of source code must retain the above copyright
|
||||
notice, this list of conditions and the following disclaimer.
|
||||
|
||||
* Redistributions in binary form must reproduce the above
|
||||
copyright notice, this list of conditions and the following
|
||||
disclaimer in the documentation and/or other materials provided
|
||||
with the distribution.
|
||||
|
||||
* Neither the name of Qualcomm Innovation Center, Inc. nor the names of its
|
||||
contributors may be used to endorse or promote products derived
|
||||
from this software without specific prior written permission.
|
||||
|
||||
NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE
|
||||
GRANTED BY THIS LICENSE. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT
|
||||
HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED
|
||||
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
||||
IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
|
||||
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
|
||||
GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
||||
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
|
||||
IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
|
||||
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
|
||||
IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
SPDX-License-Identifier: BSD-3-Clause-Clear
|
||||
-->
|
||||
|
||||
<audioPolicyConfiguration version="7.0" xmlns:xi="http://www.w3.org/2001/XInclude">
|
||||
@@ -217,7 +188,7 @@ IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
|
||||
</mixPort>
|
||||
|
||||
<mixPort name="primary input" role="sink">
|
||||
<mixPort name="primary input" role="sink" maxOpenCount="2" maxActiveCount="2">
|
||||
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
|
||||
samplingRates="8000 11025 12000 16000 22050 24000 32000 44100 48000"
|
||||
channelMasks="AUDIO_CHANNEL_IN_MONO AUDIO_CHANNEL_IN_STEREO AUDIO_CHANNEL_IN_FRONT_BACK"/>
|
||||
|
||||
382
configs/audio/audio_policy_configuration_base.xml
Normal file
382
configs/audio/audio_policy_configuration_base.xml
Normal file
@@ -0,0 +1,382 @@
|
||||
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
|
||||
<!-- Copyright (c) 2016-2021, The Linux Foundation. All rights reserved
|
||||
Not a Contribution.
|
||||
-->
|
||||
<!-- Copyright (C) 2015 The Android Open Source Project
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
-->
|
||||
|
||||
<audioPolicyConfiguration version="1.0" xmlns:xi="http://www.w3.org/2001/XInclude">
|
||||
<!-- version section contains a “version” tag in the form “major.minor” e.g version=”1.0” -->
|
||||
|
||||
<!-- Global configuration Decalaration -->
|
||||
<globalConfiguration speaker_drc_enabled="true"/>
|
||||
|
||||
|
||||
<!-- Modules section:
|
||||
There is one section per audio HW module present on the platform.
|
||||
Each module section will contains two mandatory tags for audio HAL “halVersion” and “name”.
|
||||
The module names are the same as in current .conf file:
|
||||
“primary”, “A2DP”, “remote_submix”, “USB”
|
||||
Each module will contain the following sections:
|
||||
“devicePorts”: a list of device descriptors for all input and output devices accessible via this
|
||||
module.
|
||||
This contains both permanently attached devices and removable devices.
|
||||
“mixPorts”: listing all output and input streams exposed by the audio HAL
|
||||
“routes”: list of possible connections between input and output devices or between stream and
|
||||
devices.
|
||||
"route": is defined by an attribute:
|
||||
-"type": <mux|mix> means all sources are mutual exclusive (mux) or can be mixed (mix)
|
||||
-"sink": the sink involved in this route
|
||||
-"sources": all the sources than can be connected to the sink via vis route
|
||||
“attachedDevices”: permanently attached devices.
|
||||
The attachedDevices section is a list of devices names. The names correspond to device names
|
||||
defined in <devicePorts> section.
|
||||
“defaultOutputDevice”: device to be used by default when no policy rule applies
|
||||
-->
|
||||
<modules>
|
||||
<!-- Primary Audio HAL -->
|
||||
<module name="primary" halVersion="2.0">
|
||||
<attachedDevices>
|
||||
<item>Speaker</item>
|
||||
<item>Telephony Tx</item>
|
||||
<item>Built-In Mic</item>
|
||||
<item>Built-In Back Mic</item>
|
||||
<item>FM Tuner</item>
|
||||
<item>Telephony Rx</item>
|
||||
</attachedDevices>
|
||||
<defaultOutputDevice>Speaker</defaultOutputDevice>
|
||||
<mixPorts>
|
||||
<mixPort name="primary output" role="source" flags="AUDIO_OUTPUT_FLAG_FAST|AUDIO_OUTPUT_FLAG_PRIMARY">
|
||||
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
|
||||
samplingRates="48000" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
|
||||
</mixPort>
|
||||
<mixPort name="deep_buffer" role="source"
|
||||
flags="AUDIO_OUTPUT_FLAG_DEEP_BUFFER">
|
||||
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
|
||||
samplingRates="48000" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
|
||||
</mixPort>
|
||||
<mixPort name="mmap_no_irq_out" role="source" flags="AUDIO_OUTPUT_FLAG_DIRECT|AUDIO_OUTPUT_FLAG_MMAP_NOIRQ">
|
||||
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
|
||||
samplingRates="48000" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
|
||||
</mixPort>
|
||||
<mixPort name="hifi_playback" role="source" />
|
||||
<mixPort name="compress_passthrough" role="source"
|
||||
flags="AUDIO_OUTPUT_FLAG_DIRECT|AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD|AUDIO_OUTPUT_FLAG_NON_BLOCKING"/>
|
||||
<mixPort name="direct_pcm" role="source"
|
||||
flags="AUDIO_OUTPUT_FLAG_DIRECT">
|
||||
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
|
||||
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000,64000,88200,96000,128000,176400,192000"
|
||||
channelMasks="AUDIO_CHANNEL_OUT_MONO,AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_2POINT1,AUDIO_CHANNEL_OUT_QUAD,AUDIO_CHANNEL_OUT_PENTA,AUDIO_CHANNEL_OUT_5POINT1,AUDIO_CHANNEL_OUT_6POINT1,AUDIO_CHANNEL_OUT_7POINT1"/>
|
||||
<profile name="" format="AUDIO_FORMAT_PCM_8_24_BIT"
|
||||
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000,64000,88200,96000,128000,176400,192000,352800,384000"
|
||||
channelMasks="AUDIO_CHANNEL_OUT_MONO,AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_2POINT1,AUDIO_CHANNEL_OUT_QUAD,AUDIO_CHANNEL_OUT_PENTA,AUDIO_CHANNEL_OUT_5POINT1,AUDIO_CHANNEL_OUT_6POINT1,AUDIO_CHANNEL_OUT_7POINT1"/>
|
||||
<profile name="" format="AUDIO_FORMAT_PCM_24_BIT_PACKED"
|
||||
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000,64000,88200,96000,128000,176400,192000,352800,384000"
|
||||
channelMasks="AUDIO_CHANNEL_OUT_MONO,AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_2POINT1,AUDIO_CHANNEL_OUT_QUAD,AUDIO_CHANNEL_OUT_PENTA,AUDIO_CHANNEL_OUT_5POINT1,AUDIO_CHANNEL_OUT_6POINT1,AUDIO_CHANNEL_OUT_7POINT1"/>
|
||||
<profile name="" format="AUDIO_FORMAT_PCM_32_BIT"
|
||||
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000,64000,88200,96000,128000,176400,192000,352800,384000"
|
||||
channelMasks="AUDIO_CHANNEL_OUT_MONO,AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_2POINT1,AUDIO_CHANNEL_OUT_QUAD,AUDIO_CHANNEL_OUT_PENTA,AUDIO_CHANNEL_OUT_5POINT1,AUDIO_CHANNEL_OUT_6POINT1,AUDIO_CHANNEL_OUT_7POINT1"/>
|
||||
</mixPort>
|
||||
<mixPort name="compressed_offload" role="source"
|
||||
flags="AUDIO_OUTPUT_FLAG_DIRECT|AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD|AUDIO_OUTPUT_FLAG_NON_BLOCKING">
|
||||
<profile name="" format="AUDIO_FORMAT_MP3"
|
||||
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000"
|
||||
channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
|
||||
<profile name="" format="AUDIO_FORMAT_FLAC"
|
||||
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000,64000,88200,96000,128000,176400,192000"
|
||||
channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
|
||||
<profile name="" format="AUDIO_FORMAT_ALAC"
|
||||
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000,64000,88200,96000,128000,176400,192000"
|
||||
channelMasks="AUDIO_CHANNEL_OUT_MONO,AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_2POINT1,AUDIO_CHANNEL_OUT_QUAD,AUDIO_CHANNEL_OUT_PENTA,AUDIO_CHANNEL_OUT_5POINT1,AUDIO_CHANNEL_OUT_6POINT1,AUDIO_CHANNEL_OUT_7POINT1"/>
|
||||
<profile name="" format="AUDIO_FORMAT_APE"
|
||||
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000,64000,88200,96000,128000,176400,192000"
|
||||
channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
|
||||
<profile name="" format="AUDIO_FORMAT_AAC_LC"
|
||||
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000,64000,88200,96000"
|
||||
channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
|
||||
<profile name="" format="AUDIO_FORMAT_AAC_HE_V1"
|
||||
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000,64000,88200,96000"
|
||||
channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
|
||||
<profile name="" format="AUDIO_FORMAT_AAC_HE_V2"
|
||||
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000,64000,88200,96000"
|
||||
channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
|
||||
<profile name="" format="AUDIO_FORMAT_DTS"
|
||||
samplingRates="32000,44100,48000"
|
||||
channelMasks="AUDIO_CHANNEL_OUT_MONO,AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_2POINT1,AUDIO_CHANNEL_OUT_QUAD,AUDIO_CHANNEL_OUT_PENTA,AUDIO_CHANNEL_OUT_5POINT1"/>
|
||||
<profile name="" format="AUDIO_FORMAT_DTS_HD"
|
||||
samplingRates="32000,44100,48000,64000,88200,96000,128000,176400,192000"
|
||||
channelMasks="AUDIO_CHANNEL_OUT_MONO,AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_2POINT1,AUDIO_CHANNEL_OUT_QUAD,AUDIO_CHANNEL_OUT_PENTA,AUDIO_CHANNEL_OUT_5POINT1,AUDIO_CHANNEL_OUT_6POINT1,AUDIO_CHANNEL_OUT_7POINT1"/>
|
||||
<profile name="" format="AUDIO_FORMAT_WMA"
|
||||
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000"
|
||||
channelMasks="AUDIO_CHANNEL_OUT_MONO,AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_2POINT1,AUDIO_CHANNEL_OUT_QUAD,AUDIO_CHANNEL_OUT_PENTA,AUDIO_CHANNEL_OUT_5POINT1,AUDIO_CHANNEL_OUT_6POINT1,AUDIO_CHANNEL_OUT_7POINT1"/>
|
||||
<profile name="" format="AUDIO_FORMAT_WMA_PRO"
|
||||
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000,64000,88200,96000"
|
||||
channelMasks="AUDIO_CHANNEL_OUT_MONO,AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_2POINT1,AUDIO_CHANNEL_OUT_QUAD,AUDIO_CHANNEL_OUT_PENTA,AUDIO_CHANNEL_OUT_5POINT1,AUDIO_CHANNEL_OUT_6POINT1,AUDIO_CHANNEL_OUT_7POINT1"/>
|
||||
<profile name="" format="AUDIO_FORMAT_AAC_ADTS_LC"
|
||||
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000,64000,88200,96000"
|
||||
channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
|
||||
<profile name="" format="AUDIO_FORMAT_AAC_ADTS_HE_V1"
|
||||
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000,64000,88200,96000"
|
||||
channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
|
||||
<profile name="" format="AUDIO_FORMAT_AAC_ADTS_HE_V2"
|
||||
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000,64000,88200,96000"
|
||||
channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
|
||||
</mixPort>
|
||||
<mixPort name="dsd_compress_passthrough" role="source"
|
||||
flags="AUDIO_OUTPUT_FLAG_DIRECT|AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD|AUDIO_OUTPUT_FLAG_NON_BLOCKING">
|
||||
<profile name="" format="AUDIO_FORMAT_DSD"
|
||||
samplingRates="2822400,5644800"
|
||||
channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
|
||||
</mixPort>
|
||||
<mixPort name="voice_tx" role="source">
|
||||
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
|
||||
samplingRates="8000,16000,48000" channelMasks="AUDIO_CHANNEL_OUT_MONO,AUDIO_CHANNEL_OUT_STEREO"/>
|
||||
</mixPort>
|
||||
<mixPort name="voip_rx" role="source"
|
||||
flags="AUDIO_OUTPUT_FLAG_DIRECT|AUDIO_OUTPUT_FLAG_VOIP_RX">
|
||||
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
|
||||
samplingRates="8000,16000,32000,48000" channelMasks="AUDIO_CHANNEL_OUT_MONO,AUDIO_CHANNEL_OUT_STEREO"/>
|
||||
</mixPort>
|
||||
<mixPort name="incall_music_uplink" role="source"
|
||||
flags="AUDIO_OUTPUT_FLAG_INCALL_MUSIC">
|
||||
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
|
||||
samplingRates="8000,16000,48000"
|
||||
channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
|
||||
</mixPort>
|
||||
<mixPort name="primary input" role="sink">
|
||||
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
|
||||
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000"
|
||||
channelMasks="AUDIO_CHANNEL_IN_MONO,AUDIO_CHANNEL_IN_STEREO,AUDIO_CHANNEL_IN_FRONT_BACK"/>
|
||||
</mixPort>
|
||||
<mixPort name="usb_surround_sound" role="sink">
|
||||
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
|
||||
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000,88200,96000,176400,192000"
|
||||
channelMasks="AUDIO_CHANNEL_IN_MONO,AUDIO_CHANNEL_IN_STEREO,AUDIO_CHANNEL_IN_FRONT_BACK,AUDIO_CHANNEL_INDEX_MASK_3,AUDIO_CHANNEL_INDEX_MASK_4,AUDIO_CHANNEL_IN_5POINT1,AUDIO_CHANNEL_INDEX_MASK_6,AUDIO_CHANNEL_IN_7POINT1,AUDIO_CHANNEL_INDEX_MASK_8"/>
|
||||
<profile name="" format="AUDIO_FORMAT_PCM_32_BIT"
|
||||
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000,88200,96000,176400,192000"
|
||||
channelMasks="AUDIO_CHANNEL_IN_5POINT1,AUDIO_CHANNEL_INDEX_MASK_6,AUDIO_CHANNEL_IN_7POINT1,AUDIO_CHANNEL_INDEX_MASK_8"/>
|
||||
<profile name="" format="AUDIO_FORMAT_PCM_FLOAT"
|
||||
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000,88200,96000,176400,192000"
|
||||
channelMasks="AUDIO_CHANNEL_IN_5POINT1,AUDIO_CHANNEL_INDEX_MASK_6,AUDIO_CHANNEL_IN_7POINT1,AUDIO_CHANNEL_INDEX_MASK_8"/>
|
||||
</mixPort>
|
||||
<mixPort name="voip_tx" role="sink"
|
||||
flags="AUDIO_INPUT_FLAG_VOIP_TX">
|
||||
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
|
||||
samplingRates="8000,16000,32000,48000" channelMasks="AUDIO_CHANNEL_IN_MONO"/>
|
||||
</mixPort>
|
||||
<mixPort name="surround_sound" role="sink">
|
||||
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
|
||||
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000"
|
||||
channelMasks="AUDIO_CHANNEL_IN_MONO,AUDIO_CHANNEL_IN_STEREO,AUDIO_CHANNEL_IN_FRONT_BACK,AUDIO_CHANNEL_INDEX_MASK_3,AUDIO_CHANNEL_INDEX_MASK_4,AUDIO_CHANNEL_IN_5POINT1,AUDIO_CHANNEL_INDEX_MASK_6"/>
|
||||
</mixPort>
|
||||
<mixPort name="record_24" role="sink">
|
||||
<profile name="" format="AUDIO_FORMAT_PCM_24_BIT_PACKED"
|
||||
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000,96000,192000"
|
||||
channelMasks="AUDIO_CHANNEL_IN_MONO,AUDIO_CHANNEL_IN_STEREO,AUDIO_CHANNEL_IN_FRONT_BACK,AUDIO_CHANNEL_INDEX_MASK_3,AUDIO_CHANNEL_INDEX_MASK_4"/>
|
||||
<profile name="" format="AUDIO_FORMAT_PCM_8_24_BIT"
|
||||
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000,96000,192000"
|
||||
channelMasks="AUDIO_CHANNEL_IN_MONO,AUDIO_CHANNEL_IN_STEREO,AUDIO_CHANNEL_IN_FRONT_BACK,AUDIO_CHANNEL_INDEX_MASK_3,AUDIO_CHANNEL_INDEX_MASK_4"/>
|
||||
<profile name="" format="AUDIO_FORMAT_PCM_FLOAT"
|
||||
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000,96000,192000"
|
||||
channelMasks="AUDIO_CHANNEL_IN_MONO,AUDIO_CHANNEL_IN_STEREO,AUDIO_CHANNEL_IN_FRONT_BACK,AUDIO_CHANNEL_INDEX_MASK_3,AUDIO_CHANNEL_INDEX_MASK_4"/>
|
||||
</mixPort>
|
||||
<mixPort name="voice_rx" role="sink">
|
||||
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
|
||||
samplingRates="8000,16000,48000" channelMasks="AUDIO_CHANNEL_IN_MONO,AUDIO_CHANNEL_IN_STEREO"/>
|
||||
</mixPort>
|
||||
<mixPort name="mmap_no_irq_in" role="sink" flags="AUDIO_INPUT_FLAG_MMAP_NOIRQ">
|
||||
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
|
||||
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000"
|
||||
channelMasks="AUDIO_CHANNEL_IN_MONO,AUDIO_CHANNEL_IN_STEREO,AUDIO_CHANNEL_IN_FRONT_BACK,AUDIO_CHANNEL_INDEX_MASK_3"/>
|
||||
</mixPort>
|
||||
<mixPort name="hifi_input" role="sink" />
|
||||
</mixPorts>
|
||||
|
||||
<devicePorts>
|
||||
<!-- Output devices declaration, i.e. Sink DEVICE PORT -->
|
||||
<devicePort tagName="Speaker" role="sink" type="AUDIO_DEVICE_OUT_SPEAKER" address="">
|
||||
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
|
||||
samplingRates="48000" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
|
||||
</devicePort>
|
||||
<devicePort tagName="Wired Headset" type="AUDIO_DEVICE_OUT_WIRED_HEADSET" role="sink">
|
||||
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
|
||||
samplingRates="48000" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
|
||||
</devicePort>
|
||||
<devicePort tagName="Wired Headphones" type="AUDIO_DEVICE_OUT_WIRED_HEADPHONE" role="sink">
|
||||
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
|
||||
samplingRates="48000" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
|
||||
</devicePort>
|
||||
<devicePort tagName="Line" type="AUDIO_DEVICE_OUT_LINE" role="sink">
|
||||
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
|
||||
samplingRates="48000" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
|
||||
</devicePort>
|
||||
<devicePort tagName="BT SCO" type="AUDIO_DEVICE_OUT_BLUETOOTH_SCO" role="sink">
|
||||
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
|
||||
samplingRates="8000,16000" channelMasks="AUDIO_CHANNEL_OUT_MONO"/>
|
||||
</devicePort>
|
||||
<devicePort tagName="BT SCO Headset" type="AUDIO_DEVICE_OUT_BLUETOOTH_SCO_HEADSET" role="sink">
|
||||
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
|
||||
samplingRates="8000,16000" channelMasks="AUDIO_CHANNEL_OUT_MONO"/>
|
||||
</devicePort>
|
||||
<devicePort tagName="BT SCO Car Kit" type="AUDIO_DEVICE_OUT_BLUETOOTH_SCO_CARKIT" role="sink">
|
||||
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
|
||||
samplingRates="8000,16000" channelMasks="AUDIO_CHANNEL_OUT_MONO"/>
|
||||
</devicePort>
|
||||
<devicePort tagName="Telephony Tx" type="AUDIO_DEVICE_OUT_TELEPHONY_TX" role="sink">
|
||||
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
|
||||
samplingRates="8000,16000" channelMasks="AUDIO_CHANNEL_OUT_MONO,AUDIO_CHANNEL_OUT_STEREO"/>
|
||||
</devicePort>
|
||||
<devicePort tagName="HDMI" type="AUDIO_DEVICE_OUT_AUX_DIGITAL" role="sink">
|
||||
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
|
||||
samplingRates="8000,11025,16000,22050,32000,44100,48000,64000,88200,96000,128000,176400,192000"/>
|
||||
</devicePort>
|
||||
<devicePort tagName="Proxy" type="AUDIO_DEVICE_OUT_PROXY" role="sink">
|
||||
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
|
||||
samplingRates="8000,11025,16000,22050,32000,44100,48000,64000,88200,96000,128000,176400,192000"/>
|
||||
</devicePort>
|
||||
<devicePort tagName="FM" type="AUDIO_DEVICE_OUT_FM" role="sink">
|
||||
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
|
||||
samplingRates="48000" channelMasks="AUDIO_CHANNEL_OUT_MONO,AUDIO_CHANNEL_OUT_STEREO"/>
|
||||
</devicePort>
|
||||
<devicePort tagName="USB Device Out" type="AUDIO_DEVICE_OUT_USB_DEVICE" role="sink">
|
||||
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
|
||||
samplingRates="44100,48000,64000,88200,96000,128000,176400,192000"/>
|
||||
</devicePort>
|
||||
<devicePort tagName="USB Headset Out" type="AUDIO_DEVICE_OUT_USB_HEADSET" role="sink">
|
||||
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
|
||||
samplingRates="44100,48000,64000,88200,96000,128000,176400,192000"/>
|
||||
</devicePort>
|
||||
|
||||
<!-- Input devices declaration, i.e. Source DEVICE PORT -->
|
||||
<devicePort tagName="Built-In Mic" type="AUDIO_DEVICE_IN_BUILTIN_MIC" role="source">
|
||||
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
|
||||
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000"
|
||||
channelMasks="AUDIO_CHANNEL_IN_MONO,AUDIO_CHANNEL_IN_STEREO,AUDIO_CHANNEL_IN_FRONT_BACK"/>
|
||||
</devicePort>
|
||||
<devicePort tagName="Built-In Back Mic" type="AUDIO_DEVICE_IN_BACK_MIC" role="source">
|
||||
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
|
||||
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000"
|
||||
channelMasks="AUDIO_CHANNEL_IN_MONO,AUDIO_CHANNEL_IN_STEREO,AUDIO_CHANNEL_IN_FRONT_BACK"/>
|
||||
</devicePort>
|
||||
<devicePort tagName="FM Tuner" type="AUDIO_DEVICE_IN_FM_TUNER" role="source">
|
||||
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
|
||||
samplingRates="48000"
|
||||
channelMasks="AUDIO_CHANNEL_IN_MONO,AUDIO_CHANNEL_IN_STEREO"/>
|
||||
</devicePort>
|
||||
<devicePort tagName="Wired Headset Mic" type="AUDIO_DEVICE_IN_WIRED_HEADSET" role="source">
|
||||
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
|
||||
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000"
|
||||
channelMasks="AUDIO_CHANNEL_IN_MONO,AUDIO_CHANNEL_IN_STEREO,AUDIO_CHANNEL_IN_FRONT_BACK"/>
|
||||
</devicePort>
|
||||
<devicePort tagName="BT SCO Headset Mic" type="AUDIO_DEVICE_IN_BLUETOOTH_SCO_HEADSET" role="source">
|
||||
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
|
||||
samplingRates="8000,16000" channelMasks="AUDIO_CHANNEL_IN_MONO"/>
|
||||
</devicePort>
|
||||
<devicePort tagName="Telephony Rx" type="AUDIO_DEVICE_IN_TELEPHONY_RX" role="source">
|
||||
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
|
||||
samplingRates="8000,16000,48000" channelMasks="AUDIO_CHANNEL_IN_MONO"/>
|
||||
</devicePort>
|
||||
<devicePort tagName="USB Device In" type="AUDIO_DEVICE_IN_USB_DEVICE" role="source">
|
||||
</devicePort>
|
||||
<devicePort tagName="USB Headset In" type="AUDIO_DEVICE_IN_USB_HEADSET" role="source">
|
||||
</devicePort>
|
||||
|
||||
</devicePorts>
|
||||
<!-- route declaration, i.e. list all available sources for a given sink -->
|
||||
<routes>
|
||||
<route type="mix" sink="Speaker"
|
||||
sources="primary output,deep_buffer,direct_pcm,compressed_offload,voip_rx,mmap_no_irq_out"/>
|
||||
<route type="mix" sink="Wired Headset"
|
||||
sources="primary output,deep_buffer,direct_pcm,compressed_offload,dsd_compress_passthrough,voip_rx,mmap_no_irq_out"/>
|
||||
<route type="mix" sink="Wired Headphones"
|
||||
sources="primary output,deep_buffer,direct_pcm,compressed_offload,dsd_compress_passthrough,voip_rx,mmap_no_irq_out"/>
|
||||
<route type="mix" sink="Line"
|
||||
sources="primary output,deep_buffer,direct_pcm,compressed_offload,dsd_compress_passthrough,voip_rx,mmap_no_irq_out"/>
|
||||
<route type="mix" sink="HDMI"
|
||||
sources="primary output,deep_buffer,direct_pcm,compressed_offload,compress_passthrough"/>
|
||||
<route type="mix" sink="Proxy"
|
||||
sources="primary output,deep_buffer,direct_pcm,compressed_offload"/>
|
||||
<route type="mix" sink="Telephony Tx"
|
||||
sources="voice_tx,incall_music_uplink"/>
|
||||
<route type="mix" sink="FM"
|
||||
sources="primary output"/>
|
||||
<route type="mix" sink="BT SCO"
|
||||
sources="primary output,deep_buffer,direct_pcm,compressed_offload,voip_rx"/>
|
||||
<route type="mix" sink="BT SCO Headset"
|
||||
sources="primary output,deep_buffer,direct_pcm,compressed_offload,voip_rx"/>
|
||||
<route type="mix" sink="BT SCO Car Kit"
|
||||
sources="primary output,deep_buffer,direct_pcm,compressed_offload,voip_rx"/>
|
||||
<route type="mix" sink="USB Device Out"
|
||||
sources="primary output,deep_buffer,direct_pcm,compressed_offload,voip_rx,mmap_no_irq_out,hifi_playback"/>
|
||||
<route type="mix" sink="USB Headset Out"
|
||||
sources="primary output,deep_buffer,direct_pcm,compressed_offload,voip_rx,mmap_no_irq_out,hifi_playback"/>
|
||||
<route type="mix" sink="Telephony Tx"
|
||||
sources="voice_tx"/>
|
||||
<route type="mix" sink="voice_rx"
|
||||
sources="Telephony Rx"/>
|
||||
<route type="mix" sink="primary input"
|
||||
sources="Built-In Mic,Built-In Back Mic,Wired Headset Mic,BT SCO Headset Mic,FM Tuner"/>
|
||||
<route type="mix" sink="usb_surround_sound"
|
||||
sources="USB Device In,USB Headset In"/>
|
||||
<route type="mix" sink="voip_tx"
|
||||
sources="Built-In Mic,Built-In Back Mic,BT SCO Headset Mic,USB Device In,USB Headset In,Wired Headset Mic"/>
|
||||
<route type="mix" sink="surround_sound"
|
||||
sources="Built-In Mic,Built-In Back Mic"/>
|
||||
<route type="mix" sink="record_24"
|
||||
sources="Built-In Mic,Built-In Back Mic,Wired Headset Mic"/>
|
||||
<route type="mix" sink="mmap_no_irq_in"
|
||||
sources="Built-In Mic,Built-In Back Mic,Wired Headset Mic,USB Device In,USB Headset In"/>
|
||||
<route type="mix" sink="hifi_input" sources="USB Device In,USB Headset In" />
|
||||
</routes>
|
||||
|
||||
</module>
|
||||
|
||||
<!-- Usb Audio HAL -->
|
||||
<module name="usb" halVersion="2.0">
|
||||
<mixPorts>
|
||||
<mixPort name="usb_accessory output" role="source">
|
||||
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
|
||||
samplingRates="44100" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
|
||||
</mixPort>
|
||||
</mixPorts>
|
||||
<devicePorts>
|
||||
<devicePort tagName="USB Host Out" type="AUDIO_DEVICE_OUT_USB_ACCESSORY" role="sink">
|
||||
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
|
||||
samplingRates="44100" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
|
||||
</devicePort>
|
||||
</devicePorts>
|
||||
<routes>
|
||||
<route type="mix" sink="USB Host Out"
|
||||
sources="usb_accessory output"/>
|
||||
</routes>
|
||||
</module>
|
||||
|
||||
<!-- Remote Submix Audio HAL -->
|
||||
<xi:include href="/vendor/etc/r_submix_audio_policy_configuration.xml"/>
|
||||
|
||||
<!-- Bluetooth Audio HAL -->
|
||||
<xi:include href="/vendor/etc/bluetooth_audio_policy_configuration.xml"/>
|
||||
|
||||
</modules>
|
||||
<!-- End of Modules section -->
|
||||
|
||||
<!-- Volume section -->
|
||||
|
||||
<xi:include href="/vendor/etc/audio_policy_volumes.xml"/>
|
||||
<xi:include href="/vendor/etc/default_volume_tables.xml"/>
|
||||
|
||||
<!-- End of Volume section -->
|
||||
|
||||
</audioPolicyConfiguration>
|
||||
@@ -1,692 +0,0 @@
|
||||
{
|
||||
"Nodes": [
|
||||
{
|
||||
"Name": "CPULittleClusterMaxFreq",
|
||||
"Path": "/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq",
|
||||
"Values": [
|
||||
"9999999",
|
||||
"1344000",
|
||||
"1555200",
|
||||
"1670400",
|
||||
"1785600"
|
||||
],
|
||||
"DefaultIndex": 0,
|
||||
"ResetOnInit": true
|
||||
},
|
||||
{
|
||||
"Name": "CPULittleClusterMinFreq",
|
||||
"Path": "/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq",
|
||||
"Values": [
|
||||
"9999999",
|
||||
"1555200",
|
||||
"1459200",
|
||||
"1017600",
|
||||
"672000"
|
||||
],
|
||||
"ResetOnInit": true
|
||||
},
|
||||
{
|
||||
"Name": "CPULittleClusterUpRateLimit",
|
||||
"Path": "/sys/devices/system/cpu/cpufreq/policy0/walt/up_rate_limit_us",
|
||||
"Values": [
|
||||
"2000",
|
||||
"500"
|
||||
],
|
||||
"ResetOnInit": true
|
||||
},
|
||||
{
|
||||
"Name": "CPULittleClusterDownRateLimit",
|
||||
"Path": "/sys/devices/system/cpu/cpufreq/policy0/walt/down_rate_limit_us",
|
||||
"Values": [
|
||||
"2000",
|
||||
"20000"
|
||||
],
|
||||
"ResetOnInit": true
|
||||
},
|
||||
{
|
||||
"Name": "CPUBigClusterMaxFreq",
|
||||
"Path": "/sys/devices/system/cpu/cpu3/cpufreq/scaling_max_freq",
|
||||
"Values": [
|
||||
"9999999",
|
||||
"1651200",
|
||||
"2054400",
|
||||
"2323200",
|
||||
"2592000"
|
||||
],
|
||||
"DefaultIndex": 0,
|
||||
"ResetOnInit": true
|
||||
},
|
||||
{
|
||||
"Name": "CPUBigClusterMinFreq",
|
||||
"Path": "/sys/devices/system/cpu/cpu3/cpufreq/scaling_min_freq",
|
||||
"Values": [
|
||||
"9999999",
|
||||
"1651200",
|
||||
"1536000",
|
||||
"1401600",
|
||||
"729600"
|
||||
],
|
||||
"ResetOnInit": true
|
||||
},
|
||||
{
|
||||
"Name": "CPUBigClusterUpRateLimit",
|
||||
"Path": "/sys/devices/system/cpu/cpufreq/policy3/walt/up_rate_limit_us",
|
||||
"Values": [
|
||||
"2000",
|
||||
"500"
|
||||
],
|
||||
"ResetOnInit": true
|
||||
},
|
||||
{
|
||||
"Name": "CPUBigClusterDownRateLimit",
|
||||
"Path": "/sys/devices/system/cpu/cpufreq/policy3/walt/down_rate_limit_us",
|
||||
"Values": [
|
||||
"2000",
|
||||
"10000"
|
||||
],
|
||||
"ResetOnInit": true
|
||||
},
|
||||
{
|
||||
"Name": "CPUBigPlusClusterMaxFreq",
|
||||
"Path": "/sys/devices/system/cpu/cpu7/cpufreq/scaling_max_freq",
|
||||
"Values": [
|
||||
"9999999",
|
||||
"1708800",
|
||||
"2227200",
|
||||
"2726400",
|
||||
"2956800"
|
||||
],
|
||||
"DefaultIndex": 0,
|
||||
"ResetOnInit": true
|
||||
},
|
||||
{
|
||||
"Name": "CPUBigPlusClusterMinFreq",
|
||||
"Path": "/sys/devices/system/cpu/cpu7/cpufreq/scaling_min_freq",
|
||||
"Values": [
|
||||
"9999999",
|
||||
"1708800",
|
||||
"1593600",
|
||||
"1363200",
|
||||
"998400"
|
||||
],
|
||||
"ResetOnInit": true
|
||||
},
|
||||
{
|
||||
"Name": "CPUBigPlusClusterUpRateLimit",
|
||||
"Path": "/sys/devices/system/cpu/cpufreq/policy7/walt/up_rate_limit_us",
|
||||
"Values": [
|
||||
"2000",
|
||||
"500"
|
||||
],
|
||||
"ResetOnInit": true
|
||||
},
|
||||
{
|
||||
"Name": "CPUBigPlusClusterDownRateLimit",
|
||||
"Path": "/sys/devices/system/cpu/cpufreq/policy7/walt/down_rate_limit_us",
|
||||
"Values": [
|
||||
"2000",
|
||||
"5000"
|
||||
],
|
||||
"ResetOnInit": true
|
||||
},
|
||||
{
|
||||
"Name": "UclampTAMin",
|
||||
"Path": "/dev/cpuctl/top-app/cpu.uclamp.min",
|
||||
"Values": [
|
||||
"0",
|
||||
"30",
|
||||
"50"
|
||||
],
|
||||
"DefaultIndex": 0,
|
||||
"ResetOnInit": true
|
||||
},
|
||||
{
|
||||
"Name": "UclampTALatency",
|
||||
"Path": "/dev/cpuctl/top-app/cpu.uclamp.latency_sensitive",
|
||||
"Values": [
|
||||
"1",
|
||||
"0"
|
||||
],
|
||||
"ResetOnInit": true
|
||||
},
|
||||
{
|
||||
"Name": "UclampFGMin",
|
||||
"Path": "/dev/cpuctl/foreground/cpu.uclamp.min",
|
||||
"Values": [
|
||||
"0",
|
||||
"50"
|
||||
],
|
||||
"DefaultIndex": 0,
|
||||
"ResetOnInit": true
|
||||
},
|
||||
{
|
||||
"Name": "SchedBusyHystNs",
|
||||
"Path": "/proc/sys/walt/sched_busy_hyst_ns",
|
||||
"Values": [
|
||||
"99000000",
|
||||
"3000000",
|
||||
"0"
|
||||
],
|
||||
"ResetOnInit": true
|
||||
},
|
||||
{
|
||||
"Name": "SchedBusyHystEnableCPUs",
|
||||
"Path": "/proc/sys/walt/sched_busy_hysteresis_enable_cpus",
|
||||
"Values": [
|
||||
"255",
|
||||
"15",
|
||||
"0"
|
||||
],
|
||||
"ResetOnInit": true
|
||||
},
|
||||
{
|
||||
"Name": "SchedMinTaskUtilForBoost",
|
||||
"Path": "/proc/sys/walt/sched_min_task_util_for_boost",
|
||||
"Values": [
|
||||
"0",
|
||||
"51"
|
||||
],
|
||||
"ResetOnInit": true
|
||||
},
|
||||
{
|
||||
"Name": "SchedMinTaskUtilForColoc",
|
||||
"Path": "/proc/sys/walt/sched_min_task_util_for_colocation",
|
||||
"Values": [
|
||||
"0",
|
||||
"35"
|
||||
],
|
||||
"ResetOnInit": true
|
||||
},
|
||||
{
|
||||
"Name": "SchedMinTaskUtilForUclamp",
|
||||
"Path": "/proc/sys/walt/sched_min_task_util_for_uclamp",
|
||||
"Values": [
|
||||
"0",
|
||||
"51"
|
||||
],
|
||||
"ResetOnInit": true
|
||||
},
|
||||
{
|
||||
"Name": "GPUMaxFreq",
|
||||
"Path": "/sys/class/kgsl/kgsl-3d0/devfreq/max_freq",
|
||||
"Values": [
|
||||
"680000000",
|
||||
"615000000",
|
||||
"550000000"
|
||||
],
|
||||
"DefaultIndex": 0,
|
||||
"ResetOnInit": true
|
||||
},
|
||||
{
|
||||
"Name": "GPUMinFreq",
|
||||
"Path": "/sys/class/kgsl/kgsl-3d0/devfreq/min_freq",
|
||||
"Values": [
|
||||
"550000000",
|
||||
"401000000",
|
||||
"220000000"
|
||||
],
|
||||
"ResetOnInit": true
|
||||
},
|
||||
{
|
||||
"Name": "GPUForceRailOn",
|
||||
"Path": "/sys/class/kgsl/kgsl-3d0/force_rail_on",
|
||||
"Values": [
|
||||
"1",
|
||||
"0"
|
||||
],
|
||||
"ResetOnInit": true
|
||||
},
|
||||
{
|
||||
"Name": "GPUForceClkOn",
|
||||
"Path": "/sys/class/kgsl/kgsl-3d0/force_clk_on",
|
||||
"Values": [
|
||||
"1",
|
||||
"0"
|
||||
],
|
||||
"ResetOnInit": true
|
||||
},
|
||||
{
|
||||
"Name": "GPUIdleTimer",
|
||||
"Path": "/sys/class/kgsl/kgsl-3d0/idle_timer",
|
||||
"Values": [
|
||||
"10000",
|
||||
"80"
|
||||
],
|
||||
"ResetOnInit": true
|
||||
},
|
||||
{
|
||||
"Name": "TouchscreenEnable",
|
||||
"Path": "/sys/class/sec/tsp/input/enabled",
|
||||
"Values": [
|
||||
"1",
|
||||
"0"
|
||||
],
|
||||
"ResetOnInit": true
|
||||
},
|
||||
{
|
||||
"Name": "DoubleTapToWakeEnable",
|
||||
"Path": "/sys/class/sec/tsp/cmd",
|
||||
"Values": [
|
||||
"aot_enable,0",
|
||||
"aot_enable,1"
|
||||
],
|
||||
"DefaultIndex": 0
|
||||
},
|
||||
{
|
||||
"Name": "CPUBWHystTriggerCount",
|
||||
"Path": "/sys/devices/system/cpu/bus_dcvs/DDR/24091000.qcom,bwmon-ddr/hyst_trigger_count",
|
||||
"Values": [
|
||||
"0",
|
||||
"3"
|
||||
],
|
||||
"ResetOnInit": true
|
||||
},
|
||||
{
|
||||
"Name": "CPUBWHistMemory",
|
||||
"Path": "/sys/devices/system/cpu/bus_dcvs/DDR/24091000.qcom,bwmon-ddr/hist_memory",
|
||||
"Values": [
|
||||
"0",
|
||||
"20"
|
||||
],
|
||||
"ResetOnInit": true
|
||||
},
|
||||
{
|
||||
"Name": "CPUBWHystLength",
|
||||
"Path": "/sys/devices/system/cpu/bus_dcvs/DDR/24091000.qcom,bwmon-ddr/hyst_length",
|
||||
"Values": [
|
||||
"0",
|
||||
"10"
|
||||
],
|
||||
"ResetOnInit": true
|
||||
},
|
||||
{
|
||||
"Name": "CPUBWMinFreq",
|
||||
"Path": "/sys/devices/system/cpu/bus_dcvs/DDR/boost_freq",
|
||||
"Values": [
|
||||
"3686000",
|
||||
"1555000",
|
||||
"547000"
|
||||
],
|
||||
"ResetOnInit": true
|
||||
},
|
||||
{
|
||||
"Name": "LLCCBWHystTriggerCount",
|
||||
"Path": "/sys/devices/system/cpu/bus_dcvs/LLCC/240b6400.qcom,bwmon-llcc/hyst_trigger_count",
|
||||
"Values": [
|
||||
"0",
|
||||
"3"
|
||||
],
|
||||
"ResetOnInit": true
|
||||
},
|
||||
{
|
||||
"Name": "LLCCBWHistMemory",
|
||||
"Path": "/sys/devices/system/cpu/bus_dcvs/LLCC/240b6400.qcom,bwmon-llcc/hist_memory",
|
||||
"Values": [
|
||||
"0",
|
||||
"20"
|
||||
],
|
||||
"ResetOnInit": true
|
||||
},
|
||||
{
|
||||
"Name": "LLCCBWHystLength",
|
||||
"Path": "/sys/devices/system/cpu/bus_dcvs/LLCC/240b6400.qcom,bwmon-llcc/hyst_length",
|
||||
"Values": [
|
||||
"0",
|
||||
"10"
|
||||
],
|
||||
"ResetOnInit": true
|
||||
},
|
||||
{
|
||||
"Name": "LLCCBWMinFreq",
|
||||
"Path": "/sys/devices/system/cpu/bus_dcvs/LLCC/boost_freq",
|
||||
"Values": [
|
||||
"1066000",
|
||||
"600000",
|
||||
"300000"
|
||||
],
|
||||
"ResetOnInit": true
|
||||
},
|
||||
{
|
||||
"Name": "L3MinFreq",
|
||||
"Path": "/sys/devices/system/cpu/bus_dcvs/L3/boost_freq",
|
||||
"Values": [
|
||||
"1804800",
|
||||
"1056000",
|
||||
"307200"
|
||||
],
|
||||
"ResetOnInit": true
|
||||
},
|
||||
{
|
||||
"Name": "PowerHALMainState",
|
||||
"Path": "vendor.powerhal.state",
|
||||
"Values": [
|
||||
"SUSTAINED_PERFORMANCE",
|
||||
""
|
||||
],
|
||||
"Type": "Property"
|
||||
},
|
||||
{
|
||||
"Name": "PowerHALRenderingState",
|
||||
"Path": "vendor.powerhal.rendering",
|
||||
"Values": [
|
||||
"EXPENSIVE_RENDERING",
|
||||
""
|
||||
],
|
||||
"Type": "Property"
|
||||
}
|
||||
],
|
||||
"Actions": [
|
||||
{
|
||||
"PowerHint": "SUSTAINED_PERFORMANCE",
|
||||
"Node": "PowerHALMainState",
|
||||
"Duration": 0,
|
||||
"Value": "SUSTAINED_PERFORMANCE"
|
||||
},
|
||||
{
|
||||
"PowerHint": "SUSTAINED_PERFORMANCE",
|
||||
"Node": "CPULittleClusterMaxFreq",
|
||||
"Duration": 0,
|
||||
"Value": "1555200"
|
||||
},
|
||||
{
|
||||
"PowerHint": "SUSTAINED_PERFORMANCE",
|
||||
"Node": "CPUBigClusterMaxFreq",
|
||||
"Duration": 0,
|
||||
"Value": "1651200"
|
||||
},
|
||||
{
|
||||
"PowerHint": "SUSTAINED_PERFORMANCE",
|
||||
"Node": "CPUBigPlusClusterMaxFreq",
|
||||
"Duration": 0,
|
||||
"Value": "1708800"
|
||||
},
|
||||
{
|
||||
"PowerHint": "SUSTAINED_PERFORMANCE",
|
||||
"Node": "GPUMaxFreq",
|
||||
"Duration": 0,
|
||||
"Value": "680000000"
|
||||
},
|
||||
{
|
||||
"PowerHint": "INTERACTION",
|
||||
"Node": "UclampTAMin",
|
||||
"Duration": 0,
|
||||
"Value": "30"
|
||||
},
|
||||
{
|
||||
"PowerHint": "INTERACTION",
|
||||
"Node": "UclampTALatency",
|
||||
"Duration": 0,
|
||||
"Value": "1"
|
||||
},
|
||||
{
|
||||
"PowerHint": "INTERACTION",
|
||||
"Node": "SchedBusyHystNs",
|
||||
"Duration": 0,
|
||||
"Value": "99000000"
|
||||
},
|
||||
{
|
||||
"PowerHint": "INTERACTION",
|
||||
"Node": "SchedBusyHystEnableCPUs",
|
||||
"Duration": 0,
|
||||
"Value": "255"
|
||||
},
|
||||
{
|
||||
"PowerHint": "INTERACTION",
|
||||
"Node": "SchedMinTaskUtilForBoost",
|
||||
"Duration": 0,
|
||||
"Value": "0"
|
||||
},
|
||||
{
|
||||
"PowerHint": "INTERACTION",
|
||||
"Node": "SchedMinTaskUtilForColoc",
|
||||
"Duration": 0,
|
||||
"Value": "0"
|
||||
},
|
||||
{
|
||||
"PowerHint": "INTERACTION",
|
||||
"Node": "SchedMinTaskUtilForUclamp",
|
||||
"Duration": 0,
|
||||
"Value": "0"
|
||||
},
|
||||
{
|
||||
"PowerHint": "INTERACTION",
|
||||
"Node": "CPUBWHystTriggerCount",
|
||||
"Duration": 0,
|
||||
"Value": "0"
|
||||
},
|
||||
{
|
||||
"PowerHint": "INTERACTION",
|
||||
"Node": "CPUBWHystLength",
|
||||
"Duration": 0,
|
||||
"Value": "0"
|
||||
},
|
||||
{
|
||||
"PowerHint": "INTERACTION",
|
||||
"Node": "CPUBWHistMemory",
|
||||
"Duration": 0,
|
||||
"Value": "0"
|
||||
},
|
||||
{
|
||||
"PowerHint": "INTERACTION",
|
||||
"Node": "CPUBWMinFreq",
|
||||
"Duration": 0,
|
||||
"Value": "1555000"
|
||||
},
|
||||
{
|
||||
"PowerHint": "INTERACTION",
|
||||
"Node": "LLCCBWHystTriggerCount",
|
||||
"Duration": 0,
|
||||
"Value": "0"
|
||||
},
|
||||
{
|
||||
"PowerHint": "INTERACTION",
|
||||
"Node": "LLCCBWHystLength",
|
||||
"Duration": 0,
|
||||
"Value": "0"
|
||||
},
|
||||
{
|
||||
"PowerHint": "INTERACTION",
|
||||
"Node": "LLCCBWHistMemory",
|
||||
"Duration": 0,
|
||||
"Value": "0"
|
||||
},
|
||||
{
|
||||
"PowerHint": "INTERACTION",
|
||||
"Node": "LLCCBWMinFreq",
|
||||
"Duration": 0,
|
||||
"Value": "600000"
|
||||
},
|
||||
{
|
||||
"PowerHint": "INTERACTIVE",
|
||||
"Node": "CPULittleClusterUpRateLimit",
|
||||
"Duration": 0,
|
||||
"Value": "500"
|
||||
},
|
||||
{
|
||||
"PowerHint": "INTERACTIVE",
|
||||
"Node": "CPULittleClusterDownRateLimit",
|
||||
"Duration": 0,
|
||||
"Value": "20000"
|
||||
},
|
||||
{
|
||||
"PowerHint": "INTERACTIVE",
|
||||
"Node": "CPUBigClusterUpRateLimit",
|
||||
"Duration": 0,
|
||||
"Value": "500"
|
||||
},
|
||||
{
|
||||
"PowerHint": "INTERACTIVE",
|
||||
"Node": "CPUBigClusterDownRateLimit",
|
||||
"Duration": 0,
|
||||
"Value": "10000"
|
||||
},
|
||||
{
|
||||
"PowerHint": "INTERACTIVE",
|
||||
"Node": "CPUBigPlusClusterUpRateLimit",
|
||||
"Duration": 0,
|
||||
"Value": "500"
|
||||
},
|
||||
{
|
||||
"PowerHint": "INTERACTIVE",
|
||||
"Node": "CPUBigPlusClusterDownRateLimit",
|
||||
"Duration": 0,
|
||||
"Value": "5000"
|
||||
},
|
||||
{
|
||||
"PowerHint": "INTERACTIVE",
|
||||
"Node": "SchedBusyHystNs",
|
||||
"Duration": 0,
|
||||
"Value": "3000000"
|
||||
},
|
||||
{
|
||||
"PowerHint": "INTERACTIVE",
|
||||
"Node": "SchedBusyHystEnableCPUs",
|
||||
"Duration": 0,
|
||||
"Value": "15"
|
||||
},
|
||||
{
|
||||
"PowerHint": "LAUNCH",
|
||||
"Node": "CPUBigPlusClusterMinFreq",
|
||||
"Duration": 3000,
|
||||
"Value": "9999999"
|
||||
},
|
||||
{
|
||||
"PowerHint": "LAUNCH",
|
||||
"Node": "CPUBigClusterMinFreq",
|
||||
"Duration": 3000,
|
||||
"Value": "9999999"
|
||||
},
|
||||
{
|
||||
"PowerHint": "LAUNCH",
|
||||
"Node": "CPULittleClusterMinFreq",
|
||||
"Duration": 3000,
|
||||
"Value": "9999999"
|
||||
},
|
||||
{
|
||||
"PowerHint": "LAUNCH",
|
||||
"Node": "UclampTAMin",
|
||||
"Duration": 3000,
|
||||
"Value": "50"
|
||||
},
|
||||
{
|
||||
"PowerHint": "LAUNCH",
|
||||
"Node": "UclampFGMin",
|
||||
"Duration": 3000,
|
||||
"Value": "50"
|
||||
},
|
||||
{
|
||||
"PowerHint": "LAUNCH",
|
||||
"Node": "CPUBWHystTriggerCount",
|
||||
"Duration": 3000,
|
||||
"Value": "0"
|
||||
},
|
||||
{
|
||||
"PowerHint": "LAUNCH",
|
||||
"Node": "CPUBWHystLength",
|
||||
"Duration": 3000,
|
||||
"Value": "0"
|
||||
},
|
||||
{
|
||||
"PowerHint": "LAUNCH",
|
||||
"Node": "CPUBWHistMemory",
|
||||
"Duration": 3000,
|
||||
"Value": "0"
|
||||
},
|
||||
{
|
||||
"PowerHint": "LAUNCH",
|
||||
"Node": "CPUBWMinFreq",
|
||||
"Duration": 3000,
|
||||
"Value": "3686000"
|
||||
},
|
||||
{
|
||||
"PowerHint": "LAUNCH",
|
||||
"Node": "LLCCBWHystTriggerCount",
|
||||
"Duration": 3000,
|
||||
"Value": "0"
|
||||
},
|
||||
{
|
||||
"PowerHint": "LAUNCH",
|
||||
"Node": "LLCCBWHystLength",
|
||||
"Duration": 3000,
|
||||
"Value": "0"
|
||||
},
|
||||
{
|
||||
"PowerHint": "LAUNCH",
|
||||
"Node": "LLCCBWHistMemory",
|
||||
"Duration": 3000,
|
||||
"Value": "0"
|
||||
},
|
||||
{
|
||||
"PowerHint": "LAUNCH",
|
||||
"Node": "LLCCBWMinFreq",
|
||||
"Duration": 3000,
|
||||
"Value": "1066000"
|
||||
},
|
||||
{
|
||||
"PowerHint": "LAUNCH",
|
||||
"Node": "L3MinFreq",
|
||||
"Duration": 3000,
|
||||
"Value": "1804800"
|
||||
},
|
||||
{
|
||||
"PowerHint": "LAUNCH",
|
||||
"Node": "GPUForceClkOn",
|
||||
"Duration": 3000,
|
||||
"Value": "1"
|
||||
},
|
||||
{
|
||||
"PowerHint": "LAUNCH",
|
||||
"Node": "GPUForceRailOn",
|
||||
"Duration": 3000,
|
||||
"Value": "1"
|
||||
},
|
||||
{
|
||||
"PowerHint": "LAUNCH",
|
||||
"Node": "GPUIdleTimer",
|
||||
"Duration": 3000,
|
||||
"Value": "10000"
|
||||
},
|
||||
{
|
||||
"PowerHint": "EXPENSIVE_RENDERING",
|
||||
"Node": "PowerHALRenderingState",
|
||||
"Duration": 0,
|
||||
"Value": "EXPENSIVE_RENDERING"
|
||||
},
|
||||
{
|
||||
"PowerHint": "EXPENSIVE_RENDERING",
|
||||
"Node": "GPUMinFreq",
|
||||
"Duration": 0,
|
||||
"Value": "550000000"
|
||||
},
|
||||
{
|
||||
"PowerHint": "INTERACTIVE",
|
||||
"Node": "TouchscreenEnable",
|
||||
"Duration": 0,
|
||||
"Value": "1"
|
||||
},
|
||||
{
|
||||
"PowerHint": "DOUBLE_TAP_TO_WAKE",
|
||||
"Node": "DoubleTapToWakeEnable",
|
||||
"Duration": 0,
|
||||
"Value": "aot_enable,1"
|
||||
},
|
||||
{
|
||||
"PowerHint": "Flipendo",
|
||||
"Node": "CPULittleClusterMaxFreq",
|
||||
"Duration": 0,
|
||||
"Value": "1555200"
|
||||
},
|
||||
{
|
||||
"PowerHint": "Flipendo",
|
||||
"Node": "CPUBigClusterMaxFreq",
|
||||
"Duration": 0,
|
||||
"Value": "1651200"
|
||||
},
|
||||
{
|
||||
"PowerHint": "Flipendo",
|
||||
"Node": "CPUBigPlusClusterMaxFreq",
|
||||
"Duration": 0,
|
||||
"Value": "1708800"
|
||||
}
|
||||
]
|
||||
}
|
||||
@@ -1,84 +0,0 @@
|
||||
# /odm/etc/usb_compositions.conf: HSUSB VID PID supported compositions
|
||||
#
|
||||
# This file lists the vendor supported vid-pid compositions for HSUSB that are
|
||||
# referenced in UsbGadget.cpp. Use the specified format below for compositions,
|
||||
# where right-most column is the actual order of properties; these are few
|
||||
# cases where adb does not appear in the end of the composition
|
||||
#
|
||||
# <properties> <vid> <pid> <actual order of properties>
|
||||
adb 0x04E8 0x6860
|
||||
sec_charging 0x04E8 0x6860
|
||||
sec_charging,adb 0x04E8 0x6860
|
||||
mass_storage 0x04E8 0x685B
|
||||
mass_storage,adb 0x04E8 0x685E adb,mass_storage
|
||||
diag,adb 0x04E8 0x901D
|
||||
diag,adb,serial_cdev 0x04E8 0x901F
|
||||
diag 0x04E8 0x900E
|
||||
diag,serial_cdev,rmnet,adb 0x04E8 0x9091
|
||||
diag,serial_cdev,rmnet 0x04E8 0x9092
|
||||
rndis 0x04E8 0x6863
|
||||
diag,serial_cdev,serial_cdev_nmea,adb 0x04E8 0x9020 diag,adb,serial_cdev,serial_cdev_nmea
|
||||
rndis,adb 0x04E8 0x6864
|
||||
rndis,diag 0x04E8 0x902C
|
||||
rndis,diag,adb 0x04E8 0x902D
|
||||
rndis,serial_cdev 0x04E8 0x90B3
|
||||
rndis,serial_cdev,adb 0x04E8 0x90B4
|
||||
rndis,serial_cdev,diag 0x04E8 0x90B5
|
||||
rndis,serial_cdev,diag,adb 0x04E8 0x90B6
|
||||
midi 0x04E8 0x686C
|
||||
midi,adb 0x04E8 0x686C
|
||||
mtp 0x04E8 0x6860
|
||||
mtp,adb 0x04E8 0x6860
|
||||
mtp,diag 0x04E8 0x901B
|
||||
mtp,diag,adb 0x04E8 0x903A
|
||||
ptp 0x04E8 0x6865
|
||||
ptp,adb 0x04E8 0x6866
|
||||
diag,qdss 0x04E8 0x904A diag,qdss_debug
|
||||
diag,qdss,adb 0x04E8 0x9060 diag,qdss_debug,adb
|
||||
rndis,diag,qdss 0x04E8 0x9081 rndis,diag,qdss_debug
|
||||
rndis,diag,qdss,adb 0x04E8 0x9082 rndis,diag,qdss_debug,adb
|
||||
diag,qdss,rmnet 0x04E8 0x9083 diag,qdss_debug,rmnet
|
||||
diag,qdss,rmnet,adb 0x04E8 0x9084 diag,qdss_debug,adb,rmnet
|
||||
ncm 0x04E8 0x685D
|
||||
ncm,adb 0x04E8 0x685D
|
||||
diag,serial_cdev 0x04E8 0x9004
|
||||
diag,serial_cdev,rmnet,dpl 0x04E8 0x90B7
|
||||
diag,serial_cdev,rmnet,dpl,adb 0x04E8 0x90B8
|
||||
rndis,diag,dpl 0x04E8 0x90BF
|
||||
rndis,diag,dpl,adb 0x04E8 0x90C0
|
||||
ccid 0x04E8 0x90CE
|
||||
ccid,adb 0x04E8 0x90CF
|
||||
ccid,diag 0x04E8 0x90D0
|
||||
ccid,diag,adb 0x04E8 0x90D1
|
||||
diag,serial_cdev,rmnet,ccid 0x04E8 0x90D2
|
||||
diag,serial_cdev,rmnet,ccid,adb 0x04E8 0x90D3
|
||||
diag,diag_mdm,qdss,qdss_mdm,serial_cdev,serial_cdev_mdm,rmnet 0x04E8 0x90D7
|
||||
diag,diag_mdm,qdss,qdss_mdm,serial_cdev,serial_cdev_mdm,rmnet,adb 0x04E8 0x90D8
|
||||
diag,diag_mdm,qdss,qdss_mdm,serial_cdev,serial_cdev_mdm,dpl,rmnet 0x04E8 0x90DD
|
||||
diag,diag_mdm,qdss,qdss_mdm,serial_cdev,serial_cdev_mdm,dpl,rmnet,adb 0x04E8 0x90DE
|
||||
diag,serial_cdev,rmnet,dpl,qdss 0x04E8 0x90DC
|
||||
diag,serial_cdev,rmnet,dpl,qdss,adb 0x04E8 0x90DB
|
||||
diag,uac2,adb 0x04E8 0x90CA diag,adb,uac2
|
||||
diag,uac2 0x04E8 0x901C
|
||||
diag,uvc,adb 0x04E8 0x90CB diag,adb,uvc
|
||||
diag,uvc 0x04E8 0x90DF
|
||||
diag,uac2,uvc,adb 0x04E8 0x90CC diag,adb,uac2,uvc
|
||||
diag,uac2,uvc 0x04E8 0x90E0
|
||||
diag,diag_mdm,qdss,qdss_mdm,serial_cdev,dpl,rmnet 0x04E8 0x90E4
|
||||
diag,diag_mdm,qdss,qdss_mdm,serial_cdev,dpl,rmnet,adb 0x04E8 0x90E5
|
||||
rndis,diag,diag_mdm,qdss,qdss_mdm,serial_cdev,dpl 0x04E8 0x90E6
|
||||
rndis,diag,diag_mdm,qdss,qdss_mdm,serial_cdev,dpl,adb 0x04E8 0x90E7
|
||||
rndis,diag,qdss,serial_cdev,dpl 0x04E8 0x90E8
|
||||
rndis,diag,qdss,serial_cdev,dpl,adb 0x04E8 0x90E9
|
||||
diag,diag_mdm,adb 0x04E8 0x90D9
|
||||
diag,diag_cnss,adb 0x04E8 0x90D9 diag,diag_mdm2,adb
|
||||
diag,diag_mdm,diag_mdm2,qdss,qdss_mdm,serial_cdev,dpl,rmnet 0x04E8 0x90F6
|
||||
diag,diag_mdm,diag_mdm2,qdss,qdss_mdm,serial_cdev,dpl,rmnet,adb 0x04E8 0x90F7
|
||||
rndis,diag,diag_mdm,diag_mdm2,qdss,qdss_mdm,serial_cdev,dpl 0x04E8 0x90F8
|
||||
rndis,diag,diag_mdm,diag_mdm2,qdss,qdss_mdm,serial_cdev,dpl,adb 0x04E8 0x90F9
|
||||
diag,diag_mdm,adb,ccid 0x04E8 0x9044 diag,diag_mdm,adb,ccid
|
||||
diag,diag_mdm,qdss_mdm,dpl,adb 0x04E8 0x90FF
|
||||
diag,qdss,dpl,adb 0x04E8 0x9104
|
||||
diag,dpl 0x04E8 0x9105
|
||||
diag,diag_cnss,serial_cdev,rmnet,dpl,qdss,adb 0x04E8 0x9110
|
||||
diag,diag_cnss,serial_cdev,rmnet,dpl,qdss 0x04E8 0x9111
|
||||
73
device.mk
73
device.mk
@@ -13,10 +13,7 @@ $(call inherit-product, $(SRC_TARGET_DIR)/product/emulated_storage.mk)
|
||||
# Enforce generic ramdisk allow list
|
||||
$(call inherit-product, $(SRC_TARGET_DIR)/product/generic_ramdisk.mk)
|
||||
|
||||
# Non_ab_device
|
||||
$(call inherit-product, $(SRC_TARGET_DIR)/product/non_ab_device.mk)
|
||||
|
||||
# Setup dalvik vm configs
|
||||
# Dalvik
|
||||
$(call inherit-product, frameworks/native/build/phone-xhdpi-6144-dalvik-heap.mk)
|
||||
|
||||
# Enable updating of APEXes
|
||||
@@ -66,10 +63,10 @@ AUDIO_HAL_DIR := hardware/qcom-caf/sm8650/audio/primary-hal
|
||||
AUDIO_PAL_DIR := hardware/qcom-caf/sm8650/audio/pal
|
||||
|
||||
PRODUCT_COPY_FILES += \
|
||||
$(AUDIO_HAL_DIR)/configs/common/audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_policy_configuration.xml \
|
||||
$(AUDIO_HAL_DIR)/configs/pineapple/audio_effects.conf:$(TARGET_COPY_OUT_VENDOR)/etc/audio/sku_pineapple/audio_effects.conf \
|
||||
$(AUDIO_HAL_DIR)/configs/pineapple/audio_effects.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio/sku_pineapple/audio_effects.xml \
|
||||
$(AUDIO_HAL_DIR)/configs/pineapple/microphone_characteristics.xml:$(TARGET_COPY_OUT_VENDOR)/etc/microphone_characteristics.xml \
|
||||
$(LOCAL_PATH)/configs/audio/audio_policy_configuration_base.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_policy_configuration.xml \
|
||||
$(LOCAL_PATH)/configs/audio/audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio/sku_pineapple_qssi/audio_policy_configuration.xml \
|
||||
$(LOCAL_PATH)/configs/audio/audio_policy_volumes.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_policy_volumes.xml
|
||||
|
||||
@@ -214,11 +211,7 @@ PRODUCT_ENFORCE_RRO_TARGETS := *
|
||||
|
||||
# Power
|
||||
PRODUCT_PACKAGES += \
|
||||
android.hardware.power-service.lineage-libperfmgr \
|
||||
libqti-perfd-client
|
||||
|
||||
PRODUCT_COPY_FILES += \
|
||||
$(LOCAL_PATH)/configs/powerhint.json:$(TARGET_COPY_OUT_VENDOR)/etc/powerhint.json
|
||||
android.hardware.power-service-qti
|
||||
|
||||
# Partitions
|
||||
PRODUCT_USE_DYNAMIC_PARTITIONS := true
|
||||
@@ -252,29 +245,61 @@ PRODUCT_PACKAGES += \
|
||||
|
||||
# Rootdir
|
||||
PRODUCT_PACKAGES += \
|
||||
fstab.qcom \
|
||||
dcc_extension.sh \
|
||||
hdm_status.sh \
|
||||
init.class_main.sh \
|
||||
init.crda.sh \
|
||||
init.kernel.post_boot-cliffs.sh \
|
||||
init.kernel.post_boot-pineapple.sh \
|
||||
init.kernel.post_boot.sh \
|
||||
init.mdm.sh \
|
||||
init.qcom.class_core.sh \
|
||||
init.qcom.coex.sh \
|
||||
init.qcom.early_boot.sh \
|
||||
init.qcom.efs.sync.sh \
|
||||
init.qcom.post_boot.sh \
|
||||
init.qcom.rc \
|
||||
init.qcom.sdio.sh \
|
||||
init.qcom.sensors.sh \
|
||||
init.qcom.sh \
|
||||
init.recovery.qcom.rc \
|
||||
init.target.rc \
|
||||
ueventd.qcom.rc
|
||||
init.qti.qcv.rc \
|
||||
init.qti.qcv.sh \
|
||||
init.qti.kernel.debug-cliffs.sh \
|
||||
init.qti.kernel.debug-pineapple.sh \
|
||||
init.qti.kernel.debug.sh \
|
||||
init.qti.kernel.early_debug-pineapple.sh \
|
||||
init.qti.kernel.early_debug.sh \
|
||||
init.qti.kernel.sh \
|
||||
init.qti.media.sh \
|
||||
init.qti.time.daemon.sh \
|
||||
init.qti.write.sh \
|
||||
init.vendor.sensordebug.sh \
|
||||
init.vendor.sensordebug.ssr_dump.sh \
|
||||
qca6234-service.sh \
|
||||
system_dlkm_modprobe.sh \
|
||||
ueventd.qcom.rc \
|
||||
vendor_modprobe.sh \
|
||||
|
||||
PRODUCT_PACKAGES += \
|
||||
fstab.qcom \
|
||||
init.e3q.rc \
|
||||
init.qcom.factory.rc \
|
||||
init.qcom.rc \
|
||||
init.qti.kernel.rc \
|
||||
init.qti.ss-ramdump.sh \
|
||||
init.qti.ufs.rc \
|
||||
init.samsung.bsp.rc \
|
||||
init.samsung.display.rc \
|
||||
init.samsung.dp.rc \
|
||||
init.samsung.factory.rc \
|
||||
init.samsung.power.rc \
|
||||
init.samsung.rc \
|
||||
init.samsung.user.rc \
|
||||
init.recovery.samsung.rc
|
||||
init.target.rc \
|
||||
init.recovery.qcom.rc \
|
||||
init.recovery.samsung.rc \
|
||||
|
||||
PRODUCT_COPY_FILES += \
|
||||
$(LOCAL_PATH)/rootdir/etc/fstab.qcom:$(TARGET_COPY_OUT_VENDOR_RAMDISK)/first_stage_ramdisk/fstab.qcom
|
||||
$(LOCAL_PATH)/rootdir/etc/fstab.qcom:$(TARGET_COPY_OUT_VENDOR_RAMDISK)/fstab.qcom
|
||||
|
||||
# Sensors
|
||||
#PRODUCT_PACKAGES += \
|
||||
@@ -297,10 +322,6 @@ PRODUCT_COPY_FILES += \
|
||||
# Soong namespaces
|
||||
PRODUCT_SOONG_NAMESPACES += \
|
||||
$(LOCAL_PATH) \
|
||||
hardware/google/interfaces \
|
||||
hardware/google/pixel \
|
||||
hardware/lineage/interfaces/power-libperfmgr \
|
||||
hardware/qcom-caf/common/libqti-perfd-client \
|
||||
hardware/samsung \
|
||||
kernel/samsung/sm8650 \
|
||||
kernel/samsung/sm8650-modules
|
||||
@@ -333,16 +354,12 @@ PRODUCT_PACKAGES += \
|
||||
# USB
|
||||
PRODUCT_PACKAGES += \
|
||||
android.hardware.usb-service.qti \
|
||||
android.hardware.usb.gadget-service.qti
|
||||
|
||||
PRODUCT_PACKAGES += \
|
||||
android.hardware.usb.gadget-service.qti \
|
||||
init.qcom.usb.rc \
|
||||
init.qcom.usb.sh
|
||||
|
||||
PRODUCT_SOONG_NAMESPACES += vendor/qcom/opensource/usb/etc
|
||||
|
||||
PRODUCT_COPY_FILES += \
|
||||
$(LOCAL_PATH)/configs/usb/usb_compositions.conf:$(TARGET_COPY_OUT_ODM)/etc/usb_compositions.conf
|
||||
PRODUCT_SOONG_NAMESPACES += \
|
||||
vendor/qcom/opensource/usb/etc
|
||||
|
||||
PRODUCT_COPY_FILES += \
|
||||
frameworks/native/data/etc/android.hardware.usb.accessory.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.usb.accessory.xml \
|
||||
|
||||
@@ -93,6 +93,7 @@ vendor/lib64/vendor.qti.hardware.pal@1.0-impl.so
|
||||
vendor/lib64/vendor.samsung.hardware.audio@1.0.so
|
||||
|
||||
# Audio configs
|
||||
vendor/etc/audio/sku_pineapple/mixer_paths.xml
|
||||
vendor/etc/audio/sku_pineapple/mixer_paths_pineapple_cdp.xml
|
||||
vendor/etc/audio/sku_pineapple/mixer_paths_pineapple_cdp_wsa883x.xml
|
||||
vendor/etc/audio/sku_pineapple/mixer_paths_pineapple_mtp.xml
|
||||
@@ -107,7 +108,6 @@ vendor/etc/audio_effects.xml
|
||||
vendor/etc/audio_effects_haptic.xml
|
||||
vendor/etc/audio_effects_sec.xml
|
||||
vendor/etc/audio_effects_spatializer.xml
|
||||
vendor/etc/audio_policy_configuration_base.xml
|
||||
vendor/etc/card-defs.xml
|
||||
vendor/etc/mem_logger_config.xml
|
||||
vendor/etc/sec_audio_volume_curve.xml
|
||||
@@ -861,7 +861,9 @@ vendor/lib64/libhdradaptivecustom.so
|
||||
vendor/lib64/libhdrdynamic.so
|
||||
vendor/lib64/libhdrdynamicootf.so
|
||||
vendor/lib64/libintervmipc.so
|
||||
vendor/lib64/liblearningmodule.so
|
||||
vendor/lib64/libmemutils.so
|
||||
vendor/lib64/libmeters.so
|
||||
vendor/lib64/libmm-hdcpmgr.so
|
||||
vendor/lib64/libops.so
|
||||
vendor/lib64/libqdcm-algo.so
|
||||
@@ -951,7 +953,6 @@ vendor/lib64/mediadrm/libdrmclearkeyplugin.so
|
||||
# DRM (Qualcomm Secure Execution Environment)
|
||||
vendor/bin/hw/vendor.qti.hardware.qseecom@1.0-service
|
||||
vendor/bin/qseecomd
|
||||
vendor/etc/gpfspath_oem_config.xml
|
||||
vendor/etc/init/qseecomd.rc
|
||||
vendor/etc/init/vendor.qti.hardware.qseecom@1.0-service.rc
|
||||
vendor/etc/vintf/manifest/vendor.qti.hardware.qseecom@1.0-service.xml
|
||||
@@ -1230,16 +1231,6 @@ vendor/lib64/vendor.samsung.hardware.health-V1-ndk.so
|
||||
# HyPer
|
||||
vendor/lib64/vendor.samsung.hardware.hyper-V2-ndk.so
|
||||
|
||||
# Kernel
|
||||
vendor/bin/init.kernel.post_boot-pineapple.sh
|
||||
vendor/bin/init.kernel.post_boot.sh
|
||||
vendor/bin/init.qcom.class_core.sh
|
||||
vendor/bin/init.qcom.post_boot.sh
|
||||
vendor/bin/init.qti.kernel.sh
|
||||
vendor/bin/system_dlkm_modprobe.sh
|
||||
vendor/bin/vendor_modprobe.sh
|
||||
vendor/etc/init/hw/init.qti.kernel.rc
|
||||
|
||||
# Media
|
||||
system_ext/lib64/libmmosal.so
|
||||
system_ext/lib64/libmmparser_lite.so
|
||||
@@ -1334,6 +1325,8 @@ vendor/etc/init/init.spdaemon.rc
|
||||
vendor/lib64/vendor.qti.memory.pasrmanager-V1-ndk.so
|
||||
|
||||
# Perf
|
||||
vendor/bin/hw/vendor.qti.hardware.perf2-hal-service
|
||||
vendor/etc/init/vendor.qti.hardware.perf2-hal-service.rc
|
||||
vendor/etc/perf/avcsysnodesconfigs.xml
|
||||
vendor/etc/perf/commonresourceconfigs.xml
|
||||
vendor/etc/perf/commonsysnodesconfigs.xml
|
||||
@@ -1350,8 +1343,11 @@ vendor/etc/pwr/PSMPowerOptFeature.xml
|
||||
vendor/etc/task_profiles.json
|
||||
vendor/etc/vintf/manifest/vendor.qti.hardware.perf2.xml
|
||||
vendor/lib64/libperfconfig.so
|
||||
vendor/lib64/libperfgluelayer.so
|
||||
vendor/lib64/libperfioctl.so
|
||||
vendor/lib64/libq-perflog.so
|
||||
vendor/lib64/libqti-perfd-client.so
|
||||
vendor/lib64/libqti-perfd.so
|
||||
vendor/lib64/libqti-util.so
|
||||
vendor/lib64/vendor.qti.hardware.perf2-V1-ndk.so
|
||||
|
||||
|
||||
@@ -4,36 +4,193 @@
|
||||
// SPDX-License-Identifier: Apache-2.0
|
||||
//
|
||||
|
||||
// Init scripts
|
||||
sh_binary {
|
||||
name: "dcc_extension.sh",
|
||||
src: "bin/dcc_extension.sh",
|
||||
vendor: true,
|
||||
}
|
||||
|
||||
sh_binary {
|
||||
name: "hdm_status.sh",
|
||||
src: "bin/hdm_status.sh",
|
||||
vendor: true,
|
||||
}
|
||||
|
||||
sh_binary {
|
||||
name: "init.class_main.sh",
|
||||
src: "bin/init.class_main.sh",
|
||||
vendor: true,
|
||||
}
|
||||
|
||||
sh_binary {
|
||||
name: "init.crda.sh",
|
||||
src: "bin/init.crda.sh",
|
||||
vendor: true,
|
||||
}
|
||||
|
||||
sh_binary {
|
||||
name: "init.kernel.post_boot-cliffs.sh",
|
||||
src: "bin/init.kernel.post_boot-cliffs.sh",
|
||||
vendor: true,
|
||||
}
|
||||
|
||||
sh_binary {
|
||||
name: "init.kernel.post_boot-pineapple.sh",
|
||||
src: "bin/init.kernel.post_boot-pineapple.sh",
|
||||
vendor: true,
|
||||
}
|
||||
|
||||
sh_binary {
|
||||
name: "init.kernel.post_boot.sh",
|
||||
src: "bin/init.kernel.post_boot.sh",
|
||||
vendor: true,
|
||||
}
|
||||
|
||||
sh_binary {
|
||||
name: "init.mdm.sh",
|
||||
src: "bin/init.mdm.sh",
|
||||
vendor: true,
|
||||
}
|
||||
|
||||
sh_binary {
|
||||
name: "init.qcom.class_core.sh",
|
||||
src: "bin/init.qcom.class_core.sh",
|
||||
vendor: true,
|
||||
}
|
||||
|
||||
sh_binary {
|
||||
name: "init.qcom.coex.sh",
|
||||
src: "bin/init.qcom.coex.sh",
|
||||
vendor: true,
|
||||
}
|
||||
|
||||
sh_binary {
|
||||
name: "init.qcom.early_boot.sh",
|
||||
src: "bin/init.qcom.early_boot.sh",
|
||||
vendor: true,
|
||||
}
|
||||
|
||||
sh_binary {
|
||||
name: "init.qcom.efs.sync.sh",
|
||||
src: "bin/init.qcom.efs.sync.sh",
|
||||
vendor: true,
|
||||
}
|
||||
|
||||
sh_binary {
|
||||
name: "init.qcom.post_boot.sh",
|
||||
src: "bin/init.qcom.post_boot.sh",
|
||||
vendor: true,
|
||||
}
|
||||
|
||||
sh_binary {
|
||||
name: "init.qcom.sdio.sh",
|
||||
src: "bin/init.qcom.sdio.sh",
|
||||
vendor: true,
|
||||
}
|
||||
|
||||
sh_binary {
|
||||
name: "init.qcom.sensors.sh",
|
||||
src: "bin/init.qcom.sensors.sh",
|
||||
vendor: true,
|
||||
}
|
||||
|
||||
sh_binary {
|
||||
name: "init.qcom.sh",
|
||||
src: "bin/init.qcom.sh",
|
||||
vendor: true,
|
||||
}
|
||||
|
||||
sh_binary {
|
||||
name: "init.qti.kernel.debug-cliffs.sh",
|
||||
src: "bin/init.qti.kernel.debug-cliffs.sh",
|
||||
vendor: true,
|
||||
}
|
||||
|
||||
sh_binary {
|
||||
name: "init.qti.kernel.debug-pineapple.sh",
|
||||
src: "bin/init.qti.kernel.debug-pineapple.sh",
|
||||
vendor: true,
|
||||
}
|
||||
|
||||
sh_binary {
|
||||
name: "init.qti.kernel.debug.sh",
|
||||
src: "bin/init.qti.kernel.debug.sh",
|
||||
vendor: true,
|
||||
}
|
||||
|
||||
sh_binary {
|
||||
name: "init.qti.kernel.early_debug-pineapple.sh",
|
||||
src: "bin/init.qti.kernel.early_debug-pineapple.sh",
|
||||
vendor: true,
|
||||
}
|
||||
|
||||
sh_binary {
|
||||
name: "init.qti.kernel.early_debug.sh",
|
||||
src: "bin/init.qti.kernel.early_debug.sh",
|
||||
vendor: true,
|
||||
}
|
||||
|
||||
sh_binary {
|
||||
name: "init.qti.kernel.sh",
|
||||
src: "bin/init.qti.kernel.sh",
|
||||
vendor: true,
|
||||
}
|
||||
|
||||
sh_binary {
|
||||
name: "init.qti.media.sh",
|
||||
src: "bin/init.qti.media.sh",
|
||||
vendor: true,
|
||||
}
|
||||
|
||||
sh_binary {
|
||||
name: "init.qti.qcv.sh",
|
||||
src: "bin/init.qti.qcv.sh",
|
||||
vendor: true,
|
||||
}
|
||||
|
||||
sh_binary {
|
||||
name: "init.qti.time.daemon.sh",
|
||||
src: "bin/init.qti.time.daemon.sh",
|
||||
vendor: true,
|
||||
}
|
||||
|
||||
sh_binary {
|
||||
name: "init.qti.write.sh",
|
||||
src: "bin/init.qti.write.sh",
|
||||
vendor: true,
|
||||
}
|
||||
|
||||
sh_binary {
|
||||
name: "init.vendor.sensordebug.sh",
|
||||
src: "bin/init.vendor.sensordebug.sh",
|
||||
vendor: true,
|
||||
}
|
||||
|
||||
sh_binary {
|
||||
name: "init.vendor.sensordebug.ssr_dump.sh",
|
||||
src: "bin/init.vendor.sensordebug.ssr_dump.sh",
|
||||
vendor: true,
|
||||
}
|
||||
|
||||
sh_binary {
|
||||
name: "qca6234-service.sh",
|
||||
src: "bin/qca6234-service.sh",
|
||||
vendor: true,
|
||||
}
|
||||
|
||||
sh_binary {
|
||||
name: "system_dlkm_modprobe.sh",
|
||||
src: "bin/system_dlkm_modprobe.sh",
|
||||
vendor: true,
|
||||
}
|
||||
|
||||
sh_binary {
|
||||
name: "vendor_modprobe.sh",
|
||||
src: "bin/vendor_modprobe.sh",
|
||||
vendor: true,
|
||||
}
|
||||
|
||||
// Init configuration files
|
||||
prebuilt_etc {
|
||||
name: "init.e3q.rc",
|
||||
@@ -42,6 +199,13 @@ prebuilt_etc {
|
||||
vendor: true,
|
||||
}
|
||||
|
||||
prebuilt_etc {
|
||||
name: "init.qcom.factory.rc",
|
||||
src: "etc/init.qcom.factory.rc",
|
||||
sub_dir: "init/hw",
|
||||
vendor: true,
|
||||
}
|
||||
|
||||
prebuilt_etc {
|
||||
name: "init.qcom.rc",
|
||||
src: "etc/init.qcom.rc",
|
||||
@@ -49,6 +213,34 @@ prebuilt_etc {
|
||||
vendor: true,
|
||||
}
|
||||
|
||||
prebuilt_etc {
|
||||
name: "init.qti.kernel.rc",
|
||||
src: "etc/init.qti.kernel.rc",
|
||||
sub_dir: "init/hw",
|
||||
vendor: true,
|
||||
}
|
||||
|
||||
prebuilt_etc {
|
||||
name: "init.qti.ss-ramdump.sh",
|
||||
src: "etc/init.qti.ss-ramdump.sh",
|
||||
sub_dir: "init/hw",
|
||||
vendor: true,
|
||||
}
|
||||
|
||||
prebuilt_etc {
|
||||
name: "init.qti.ufs.rc",
|
||||
src: "etc/init.qti.ufs.rc",
|
||||
sub_dir: "init/hw",
|
||||
vendor: true,
|
||||
}
|
||||
|
||||
prebuilt_etc {
|
||||
name: "init.qti.qcv.rc",
|
||||
src: "etc/init.qti.qcv.rc",
|
||||
sub_dir: "init",
|
||||
vendor: true,
|
||||
}
|
||||
|
||||
prebuilt_etc {
|
||||
name: "init.samsung.bsp.rc",
|
||||
src: "etc/init.samsung.bsp.rc",
|
||||
@@ -70,6 +262,13 @@ prebuilt_etc {
|
||||
vendor: true,
|
||||
}
|
||||
|
||||
prebuilt_etc {
|
||||
name: "init.samsung.factory.rc",
|
||||
src: "etc/init.samsung.factory.rc",
|
||||
sub_dir: "init/hw",
|
||||
vendor: true,
|
||||
}
|
||||
|
||||
prebuilt_etc {
|
||||
name: "init.samsung.power.rc",
|
||||
src: "etc/init.samsung.power.rc",
|
||||
|
||||
9
rootdir/bin/dcc_extension.sh
Normal file
9
rootdir/bin/dcc_extension.sh
Normal file
@@ -0,0 +1,9 @@
|
||||
#=============================================================================
|
||||
# Copyright (c) 2023 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#=============================================================================
|
||||
|
||||
extension()
|
||||
{
|
||||
}
|
||||
58
rootdir/bin/hdm_status.sh
Normal file
58
rootdir/bin/hdm_status.sh
Normal file
@@ -0,0 +1,58 @@
|
||||
#! /vendor/bin/sh
|
||||
|
||||
if [ "$#" -ne 1 ]
|
||||
then
|
||||
echo "Usage: $0 <hdm_status value>"
|
||||
exit
|
||||
fi
|
||||
|
||||
count=0
|
||||
policy=0
|
||||
array=(1 2 4 8 16 32 64 128 256 512)
|
||||
name_arry=(cam mmc usb wlan bt gps dis aud cpm sen)
|
||||
|
||||
|
||||
hdm_status=$1
|
||||
hdm_swblock_status=$(getprop "ro.vendor.hdm.supported.swblock")
|
||||
|
||||
echo "hdmstatus = $hdm_status"
|
||||
echo "hdm supported swblock = $hdm_swblock_status"
|
||||
|
||||
HDM_STATUS_SPLIT=$(echo $hdm_status | tr "&|" "\n")
|
||||
|
||||
#get hdm policy from ro.boot.hdm_status
|
||||
for split in $HDM_STATUS_SPLIT
|
||||
do
|
||||
count=$((($count + 1)%2))
|
||||
if [ $count -eq 0 ]; then
|
||||
split16="0x$split"
|
||||
echo "split16 = $split16"
|
||||
policy=$(($policy|$split16))
|
||||
fi
|
||||
done
|
||||
|
||||
echo "$policy"
|
||||
hex=$(printf "0x%x" "$policy")
|
||||
echo "$hex"
|
||||
|
||||
#setprop vendor.hdm.status "$hex"
|
||||
|
||||
#check sw block
|
||||
swblock=$(($policy&$hdm_swblock_status))
|
||||
swblockhex=$(printf "0x%x" "$swblock")
|
||||
echo "swblockhex = $swblockhex"
|
||||
|
||||
setprop vendor.hdm.swblock.status "$swblockhex"
|
||||
|
||||
#start sw block
|
||||
count=0
|
||||
for isblock in ${array[@]}
|
||||
do
|
||||
if [ $(($isblock&$swblock)) -eq $isblock ]; then
|
||||
echo "swblock enable = ${name_arry[$count]}"
|
||||
swblockname=$(printf "vendor.hdm.internal.%s" "${name_arry[$count]}")
|
||||
setprop $swblockname "boot"
|
||||
fi
|
||||
count=$(($count + 1))
|
||||
done
|
||||
|
||||
35
rootdir/bin/init.crda.sh
Normal file
35
rootdir/bin/init.crda.sh
Normal file
@@ -0,0 +1,35 @@
|
||||
#! /vendor/bin/sh
|
||||
|
||||
# Copyright (c) 2012, The Linux Foundation. All rights reserved.
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions are met:
|
||||
# * Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# * Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in the
|
||||
# documentation and/or other materials provided with the distribution.
|
||||
# * Neither the name of The Linux Foundation nor
|
||||
# the names of its contributors may be used to endorse or promote
|
||||
# products derived from this software without specific prior written
|
||||
# permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
# NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
|
||||
# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
||||
# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
|
||||
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
|
||||
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
||||
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
|
||||
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
|
||||
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
|
||||
country=`getprop wlan.crda.country`
|
||||
# crda takes input in COUNTRY environment variable
|
||||
if [ $country != "" ]
|
||||
then
|
||||
COUNTRY="$country" /system/bin/crda
|
||||
fi
|
||||
49
rootdir/bin/init.kernel.post_boot-cliffs.sh
Normal file
49
rootdir/bin/init.kernel.post_boot-cliffs.sh
Normal file
@@ -0,0 +1,49 @@
|
||||
#=============================================================================
|
||||
# Copyright (c) 2022-2023 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
# Copyright (c) 2009-2012, 2014-2019, The Linux Foundation. All rights reserved.
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions are met:
|
||||
# * Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# * Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in the
|
||||
# documentation and/or other materials provided with the distribution.
|
||||
# * Neither the name of The Linux Foundation nor
|
||||
# the names of its contributors may be used to endorse or promote
|
||||
# products derived from this software without specific prior written
|
||||
# permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
# NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
|
||||
# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
||||
# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
|
||||
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
|
||||
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
||||
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
|
||||
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
|
||||
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
#=============================================================================
|
||||
|
||||
rev=`cat /sys/devices/soc0/revision`
|
||||
|
||||
echo 4 > /proc/sys/kernel/printk
|
||||
|
||||
# Change console log level as per console config property
|
||||
console_config=`getprop persist.vendor.console.silent.config`
|
||||
case "$console_config" in
|
||||
"1")
|
||||
echo "Enable console config to $console_config"
|
||||
echo 0 > /proc/sys/kernel/printk
|
||||
;;
|
||||
*)
|
||||
echo "Enable console config to $console_config"
|
||||
;;
|
||||
esac
|
||||
|
||||
setprop vendor.post_boot.parsed 1
|
||||
439
rootdir/bin/init.kernel.post_boot-pineapple.sh
Normal file
439
rootdir/bin/init.kernel.post_boot-pineapple.sh
Normal file
@@ -0,0 +1,439 @@
|
||||
#=============================================================================
|
||||
# Copyright (c) 2022-2023 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
# Copyright (c) 2009-2012, 2014-2019, The Linux Foundation. All rights reserved.
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions are met:
|
||||
# * Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# * Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in the
|
||||
# documentation and/or other materials provided with the distribution.
|
||||
# * Neither the name of The Linux Foundation nor
|
||||
# the names of its contributors may be used to endorse or promote
|
||||
# products derived from this software without specific prior written
|
||||
# permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
# NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
|
||||
# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
||||
# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
|
||||
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
|
||||
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
||||
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
|
||||
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
|
||||
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
#=============================================================================
|
||||
|
||||
rev=`cat /sys/devices/soc0/revision`
|
||||
|
||||
# Configure RT parameters:
|
||||
# Long running RT task detection is confined to consolidated builds.
|
||||
# Set RT throttle runtime to 50ms more than long running RT
|
||||
# task detection time.
|
||||
# Set RT throttle period to 100ms more than RT throttle runtime.
|
||||
long_running_rt_task_ms=1200
|
||||
sched_rt_runtime_ms=`expr $long_running_rt_task_ms + 50`
|
||||
sched_rt_runtime_us=`expr $sched_rt_runtime_ms \* 1000`
|
||||
sched_rt_period_ms=`expr $sched_rt_runtime_ms + 100`
|
||||
sched_rt_period_us=`expr $sched_rt_period_ms \* 1000`
|
||||
echo $sched_rt_period_us > /proc/sys/kernel/sched_rt_period_us
|
||||
echo $sched_rt_runtime_us > /proc/sys/kernel/sched_rt_runtime_us
|
||||
|
||||
if [ -d /proc/sys/walt ]; then
|
||||
# configure maximum frequency when CPUs are partially halted
|
||||
echo 1190400 > /proc/sys/walt/sched_max_freq_partial_halt
|
||||
|
||||
# Core Control Paramters for Silvers
|
||||
echo 0xFF > /sys/devices/system/cpu/cpu0/core_ctl/nrrun_cpu_mask
|
||||
echo 0x00 > /sys/devices/system/cpu/cpu0/core_ctl/nrrun_cpu_misfit_mask
|
||||
echo 0x00 > /sys/devices/system/cpu/cpu0/core_ctl/assist_cpu_mask
|
||||
echo 0x00 > /sys/devices/system/cpu/cpu0/core_ctl/assist_cpu_misfit_mask
|
||||
|
||||
# Core control parameters for gold
|
||||
echo 3 > /sys/devices/system/cpu/cpu2/core_ctl/min_cpus
|
||||
echo 60 > /sys/devices/system/cpu/cpu2/core_ctl/busy_up_thres
|
||||
echo 30 > /sys/devices/system/cpu/cpu2/core_ctl/busy_down_thres
|
||||
echo 100 > /sys/devices/system/cpu/cpu2/core_ctl/offline_delay_ms
|
||||
echo 3 > /sys/devices/system/cpu/cpu2/core_ctl/task_thres
|
||||
echo 0 0 0 > /sys/devices/system/cpu/cpu2/core_ctl/not_preferred
|
||||
echo 0xFC > /sys/devices/system/cpu/cpu2/core_ctl/nrrun_cpu_mask
|
||||
echo 0x63 > /sys/devices/system/cpu/cpu2/core_ctl/nrrun_cpu_misfit_mask
|
||||
echo 0x00 > /sys/devices/system/cpu/cpu2/core_ctl/assist_cpu_mask
|
||||
echo 0x00 > /sys/devices/system/cpu/cpu2/core_ctl/assist_cpu_misfit_mask
|
||||
|
||||
# Core control parameters for titaniums
|
||||
echo 0 > /sys/devices/system/cpu/cpu5/core_ctl/min_cpus
|
||||
echo 2 > /sys/devices/system/cpu/cpu5/core_ctl/min_partial_cpus
|
||||
echo 60 > /sys/devices/system/cpu/cpu5/core_ctl/busy_up_thres
|
||||
echo 30 > /sys/devices/system/cpu/cpu5/core_ctl/busy_down_thres
|
||||
echo 100 > /sys/devices/system/cpu/cpu5/core_ctl/offline_delay_ms
|
||||
echo 2 > /sys/devices/system/cpu/cpu5/core_ctl/task_thres
|
||||
echo 1 1 > /sys/devices/system/cpu/cpu5/core_ctl/not_preferred
|
||||
echo 0xE0 > /sys/devices/system/cpu/cpu5/core_ctl/nrrun_cpu_mask
|
||||
echo 0x00 > /sys/devices/system/cpu/cpu5/core_ctl/nrrun_cpu_misfit_mask
|
||||
echo 0x1C > /sys/devices/system/cpu/cpu5/core_ctl/assist_cpu_mask
|
||||
echo 0x03 > /sys/devices/system/cpu/cpu5/core_ctl/assist_cpu_misfit_mask
|
||||
|
||||
# Core control parameters for gold+
|
||||
echo 0 > /sys/devices/system/cpu/cpu7/core_ctl/min_cpus
|
||||
echo 60 > /sys/devices/system/cpu/cpu7/core_ctl/busy_up_thres
|
||||
echo 30 > /sys/devices/system/cpu/cpu7/core_ctl/busy_down_thres
|
||||
echo 100 > /sys/devices/system/cpu/cpu7/core_ctl/offline_delay_ms
|
||||
echo 1 > /sys/devices/system/cpu/cpu7/core_ctl/task_thres
|
||||
echo 1 > /sys/devices/system/cpu/cpu7/core_ctl/not_preferred
|
||||
echo 0x80 > /sys/devices/system/cpu/cpu7/core_ctl/nrrun_cpu_mask
|
||||
echo 0x7C > /sys/devices/system/cpu/cpu7/core_ctl/nrrun_cpu_misfit_mask
|
||||
echo 0x7C > /sys/devices/system/cpu/cpu7/core_ctl/assist_cpu_mask
|
||||
echo 0x03 > /sys/devices/system/cpu/cpu7/core_ctl/assist_cpu_misfit_mask
|
||||
|
||||
echo 0 > /sys/devices/system/cpu/cpu0/core_ctl/enable
|
||||
echo 0 > /sys/devices/system/cpu/cpu2/core_ctl/enable
|
||||
echo 1 > /sys/devices/system/cpu/cpu5/core_ctl/enable
|
||||
echo 1 > /sys/devices/system/cpu/cpu7/core_ctl/enable
|
||||
|
||||
# Configure Single Boost Thread
|
||||
echo 0 > /proc/sys/walt/sched_sbt_delay_windows
|
||||
echo 0x60 > /proc/sys/walt/sched_sbt_pause_cpus
|
||||
|
||||
# Setting b.L scheduler parameters
|
||||
echo 95 95 95 > /proc/sys/walt/sched_upmigrate
|
||||
echo 85 85 85 > /proc/sys/walt/sched_downmigrate
|
||||
echo 80 > /proc/sys/walt/sched_group_downmigrate
|
||||
echo 90 > /proc/sys/walt/sched_group_upmigrate
|
||||
echo 1 > /proc/sys/walt/sched_walt_rotate_big_tasks
|
||||
echo 400000000 > /proc/sys/walt/sched_coloc_downmigrate_ns
|
||||
echo 16000000 16000000 16000000 16000000 16000000 16000000 16000000 5000000 > /proc/sys/walt/sched_coloc_busy_hyst_cpu_ns
|
||||
echo 248 > /proc/sys/walt/sched_coloc_busy_hysteresis_enable_cpus
|
||||
echo 10 10 10 10 10 10 10 95 > /proc/sys/walt/sched_coloc_busy_hyst_cpu_busy_pct
|
||||
echo 8500000 8500000 8500000 8500000 8500000 8500000 8500000 2000000 > /proc/sys/walt/sched_util_busy_hyst_cpu_ns
|
||||
echo 255 > /proc/sys/walt/sched_util_busy_hysteresis_enable_cpus
|
||||
echo 1 1 1 1 1 1 1 15 > /proc/sys/walt/sched_util_busy_hyst_cpu_util
|
||||
echo 40 > /proc/sys/walt/sched_cluster_util_thres_pct
|
||||
echo 0 30 30 30 > /proc/sys/walt/sched_idle_enough_clust
|
||||
echo 10 > /proc/sys/walt/sched_ed_boost
|
||||
|
||||
#Set early upmigrate tunables
|
||||
freq_to_migrate=1248000
|
||||
silver_fmax=`cat /sys/devices/system/cpu/cpufreq/policy0/scaling_max_freq`
|
||||
silver_early_upmigrate=`expr 1024 \* $silver_fmax / $freq_to_migrate`
|
||||
silver_early_downmigrate=`expr \( 1024 \* $silver_fmax \) / \( \( \( 10 \* $freq_to_migrate \) - $silver_fmax \) \/ 10 \)`
|
||||
sched_upmigrate=`cat /proc/sys/walt/sched_upmigrate`
|
||||
sched_downmigrate=`cat /proc/sys/walt/sched_downmigrate`
|
||||
sched_upmigrate=${sched_upmigrate:0:2}
|
||||
sched_downmigrate=${sched_downmigrate:0:2}
|
||||
gold_early_upmigrate=`expr \( 1024 \* 100 \) \/ $sched_upmigrate`
|
||||
gold_early_downmigrate=`expr \( 1024 \* 100 \) \/ $sched_downmigrate`
|
||||
echo $silver_early_downmigrate $gold_early_downmigrate $gold_early_downmigrate > /proc/sys/walt/sched_early_downmigrate
|
||||
echo $silver_early_upmigrate $gold_early_upmigrate $gold_early_upmigrate > /proc/sys/walt/sched_early_upmigrate
|
||||
|
||||
# Enable Gold CPUs for pipeline
|
||||
echo 28 > /proc/sys/walt/sched_pipeline_cpus
|
||||
|
||||
# set the threshold for low latency task boost feature which prioritize
|
||||
# binder activity tasks
|
||||
echo 325 > /proc/sys/walt/walt_low_latency_task_threshold
|
||||
|
||||
# configure maximum frequency of silver cluster when load is not detected and ensure that
|
||||
# other clusters' fmax remains uncapped by setting the frequency to S32_MAX
|
||||
|
||||
# enable smart fmax for silver
|
||||
echo 1804800 2147483647 2147483647 2147483647 > /proc/sys/walt/sched_fmax_cap
|
||||
|
||||
# set c1dcvs parameter
|
||||
chown system.system /sys/devices/system/cpu/c1dcvs/enable_c1dcvs
|
||||
chmod 0660 /sys/devices/system/cpu/c1dcvs/enable_c1dcvs
|
||||
chown system.system /sys/devices/system/cpu/c1dcvs/efreq_thresh
|
||||
chmod 0660 /sys/devices/system/cpu/c1dcvs/efreq_thresh
|
||||
echo 0 > /sys/devices/system/cpu/c1dcvs/enable_c1dcvs
|
||||
echo 2 1400000 > /sys/devices/system/cpu/c1dcvs/efreq_thresh
|
||||
echo 3 1400000 > /sys/devices/system/cpu/c1dcvs/efreq_thresh
|
||||
echo 4 1400000 > /sys/devices/system/cpu/c1dcvs/efreq_thresh
|
||||
echo 1 > /sys/devices/system/cpu/c1dcvs/enable_c1dcvs
|
||||
|
||||
# Turn off scheduler boost at the end
|
||||
echo 0 > /proc/sys/walt/sched_boost
|
||||
|
||||
# configure input boost settings
|
||||
if [ $rev == "1.0" ] || [ $rev == "1.1" ]; then
|
||||
echo 0 0 0 0 0 0 0 0 > /proc/sys/walt/input_boost/input_boost_freq
|
||||
else
|
||||
echo 0 0 0 0 0 0 0 0 > /proc/sys/walt/input_boost/input_boost_freq
|
||||
fi
|
||||
echo 0 > /proc/sys/walt/input_boost/input_boost_ms
|
||||
|
||||
echo "walt" > /sys/devices/system/cpu/cpufreq/policy0/scaling_governor
|
||||
echo "walt" > /sys/devices/system/cpu/cpufreq/policy2/scaling_governor
|
||||
echo "walt" > /sys/devices/system/cpu/cpufreq/policy5/scaling_governor
|
||||
echo "walt" > /sys/devices/system/cpu/cpufreq/policy7/scaling_governor
|
||||
|
||||
echo 0 > /sys/devices/system/cpu/cpufreq/policy0/walt/down_rate_limit_us
|
||||
echo 0 > /sys/devices/system/cpu/cpufreq/policy0/walt/up_rate_limit_us
|
||||
echo 0 > /sys/devices/system/cpu/cpufreq/policy2/walt/down_rate_limit_us
|
||||
echo 0 > /sys/devices/system/cpu/cpufreq/policy2/walt/up_rate_limit_us
|
||||
echo 0 > /sys/devices/system/cpu/cpufreq/policy5/walt/down_rate_limit_us
|
||||
echo 0 > /sys/devices/system/cpu/cpufreq/policy5/walt/up_rate_limit_us
|
||||
echo 0 > /sys/devices/system/cpu/cpufreq/policy7/walt/down_rate_limit_us
|
||||
echo 0 > /sys/devices/system/cpu/cpufreq/policy7/walt/up_rate_limit_us
|
||||
|
||||
echo 1 > /sys/devices/system/cpu/cpufreq/policy0/walt/pl
|
||||
echo 1 > /sys/devices/system/cpu/cpufreq/policy2/walt/pl
|
||||
echo 1 > /sys/devices/system/cpu/cpufreq/policy5/walt/pl
|
||||
echo 1 > /sys/devices/system/cpu/cpufreq/policy7/walt/pl
|
||||
|
||||
echo 787200 > /sys/devices/system/cpu/cpufreq/policy0/walt/rtg_boost_freq
|
||||
echo 844800 > /sys/devices/system/cpu/cpufreq/policy2/walt/rtg_boost_freq
|
||||
echo 844800 > /sys/devices/system/cpu/cpufreq/policy5/walt/rtg_boost_freq
|
||||
echo 902400 > /sys/devices/system/cpu/cpufreq/policy7/walt/rtg_boost_freq
|
||||
|
||||
if [ $rev == "1.0" ] || [ $rev == "1.1" ]; then
|
||||
echo 1344000 > /sys/devices/system/cpu/cpufreq/policy0/walt/hispeed_freq
|
||||
echo 1612800 > /sys/devices/system/cpu/cpufreq/policy2/walt/hispeed_freq
|
||||
echo 1612800 > /sys/devices/system/cpu/cpufreq/policy5/walt/hispeed_freq
|
||||
echo 1555200 > /sys/devices/system/cpu/cpufreq/policy7/walt/hispeed_freq
|
||||
else
|
||||
echo 1344000 > /sys/devices/system/cpu/cpufreq/policy0/walt/hispeed_freq
|
||||
echo 1612800 > /sys/devices/system/cpu/cpufreq/policy2/walt/hispeed_freq
|
||||
echo 1612800 > /sys/devices/system/cpu/cpufreq/policy5/walt/hispeed_freq
|
||||
echo 1593600 > /sys/devices/system/cpu/cpufreq/policy7/walt/hispeed_freq
|
||||
fi
|
||||
else
|
||||
echo "schedutil" > /sys/devices/system/cpu/cpufreq/policy0/scaling_governor
|
||||
echo "schedutil" > /sys/devices/system/cpu/cpufreq/policy2/scaling_governor
|
||||
echo "schedutil" > /sys/devices/system/cpu/cpufreq/policy5/scaling_governor
|
||||
echo "schedutil" > /sys/devices/system/cpu/cpufreq/policy7/scaling_governor
|
||||
echo 1 > /proc/sys/kernel/sched_pelt_multiplier
|
||||
fi
|
||||
|
||||
if [ $rev == "1.0" ] || [ $rev == "1.1" ]; then
|
||||
echo 556800 > /sys/devices/system/cpu/cpufreq/policy0/scaling_min_freq
|
||||
echo 576000 > /sys/devices/system/cpu/cpufreq/policy2/scaling_min_freq
|
||||
echo 576000 > /sys/devices/system/cpu/cpufreq/policy5/scaling_min_freq
|
||||
echo 729600 > /sys/devices/system/cpu/cpufreq/policy7/scaling_min_freq
|
||||
else
|
||||
echo 556800 > /sys/devices/system/cpu/cpufreq/policy0/scaling_min_freq
|
||||
echo 614400 > /sys/devices/system/cpu/cpufreq/policy2/scaling_min_freq
|
||||
echo 499200 > /sys/devices/system/cpu/cpufreq/policy5/scaling_min_freq
|
||||
echo 672000 > /sys/devices/system/cpu/cpufreq/policy7/scaling_min_freq
|
||||
fi
|
||||
|
||||
# Reset the RT boost, which is 1024 (max) by default.
|
||||
echo 0 > /proc/sys/kernel/sched_util_clamp_min_rt_default
|
||||
|
||||
# disable min util condition for boost
|
||||
echo 0 > /proc/sys/walt/sched_min_task_util_for_boost
|
||||
echo 0 > /proc/sys/walt/sched_min_task_util_for_colocation
|
||||
echo 0 > /proc/sys/walt/sched_min_task_util_for_uclamp
|
||||
|
||||
# cpuset parameters
|
||||
echo 0-1 5-6 > /dev/cpuset/background/cpus
|
||||
echo 0-1 5-6 > /dev/cpuset/system-background/cpus
|
||||
|
||||
|
||||
# configure bus-dcvs
|
||||
bus_dcvs="/sys/devices/system/cpu/bus_dcvs"
|
||||
|
||||
for device in $bus_dcvs/*
|
||||
do
|
||||
cat $device/hw_min_freq > $device/boost_freq
|
||||
done
|
||||
|
||||
for ubwcpbw in $bus_dcvs/UBWCP/*bwmon-ubwcp
|
||||
do
|
||||
echo "5931 7980 10437 16113" > $ubwcpbw/mbps_zones
|
||||
echo 4 > $ubwcpbw/sample_ms
|
||||
echo 80 > $ubwcpbw/io_percent
|
||||
echo 20 > $ubwcpbw/hist_memory
|
||||
echo 5 > $ubwcpbw/hyst_length
|
||||
echo 1 > $ubwcpbw/idle_length
|
||||
echo 30 > $ubwcpbw/down_thres
|
||||
echo 0 > $ubwcpbw/guard_band_mbps
|
||||
echo 250 > $ubwcpbw/up_scale
|
||||
echo 1600 > $ubwcpbw/idle_mbps
|
||||
echo 710000 > $ubwcpbw/max_freq
|
||||
echo 40 > $ubwcpbw/window_ms
|
||||
done
|
||||
|
||||
for llccbw in $bus_dcvs/LLCC/*bwmon-llcc
|
||||
do
|
||||
echo "4577 7110 9155 12298 14236 16265" > $llccbw/mbps_zones
|
||||
echo 4 > $llccbw/sample_ms
|
||||
echo 80 > $llccbw/io_percent
|
||||
echo 20 > $llccbw/hist_memory
|
||||
echo 5 > $llccbw/hyst_length
|
||||
echo 1 > $llccbw/idle_length
|
||||
echo 30 > $llccbw/down_thres
|
||||
echo 0 > $llccbw/guard_band_mbps
|
||||
echo 250 > $llccbw/up_scale
|
||||
echo 1600 > $llccbw/idle_mbps
|
||||
echo 806000 > $llccbw/max_freq
|
||||
echo 40 > $llccbw/window_ms
|
||||
done
|
||||
|
||||
for ddrbw in $bus_dcvs/DDR/*bwmon-ddr
|
||||
do
|
||||
echo "2086 5931 7980 10437 12157 14060 16113" > $ddrbw/mbps_zones
|
||||
echo 4 > $ddrbw/sample_ms
|
||||
echo 80 > $ddrbw/io_percent
|
||||
echo 20 > $ddrbw/hist_memory
|
||||
echo 5 > $ddrbw/hyst_length
|
||||
echo 1 > $ddrbw/idle_length
|
||||
echo 30 > $ddrbw/down_thres
|
||||
echo 0 > $ddrbw/guard_band_mbps
|
||||
echo 250 > $ddrbw/up_scale
|
||||
echo 1600 > $ddrbw/idle_mbps
|
||||
echo 2736000 > $ddrbw/max_freq
|
||||
echo 40 > $ddrbw/window_ms
|
||||
done
|
||||
|
||||
for latfloor in $bus_dcvs/*/*latfloor
|
||||
do
|
||||
echo 25000 > $latfloor/ipm_ceil
|
||||
done
|
||||
|
||||
for l3gold in $bus_dcvs/L3/*gold
|
||||
do
|
||||
echo 4000 > $l3gold/ipm_ceil
|
||||
done
|
||||
|
||||
for l3prime in $bus_dcvs/L3/*prime
|
||||
do
|
||||
echo 20000 > $l3prime/ipm_ceil
|
||||
done
|
||||
|
||||
for qosgold in $bus_dcvs/DDRQOS/*gold
|
||||
do
|
||||
echo 50 > $qosgold/ipm_ceil
|
||||
done
|
||||
|
||||
for qosprime in $bus_dcvs/DDRQOS/*prime
|
||||
do
|
||||
echo 100 > $qosprime/ipm_ceil
|
||||
done
|
||||
|
||||
for ddrprime in $bus_dcvs/DDR/*prime
|
||||
do
|
||||
echo 25 > $ddrprime/freq_scale_pct
|
||||
echo 1500 > $ddrprime/freq_scale_floor_mhz
|
||||
echo 2726 > $ddrprime/freq_scale_ceil_mhz
|
||||
done
|
||||
|
||||
# Permission for video hint
|
||||
chown root.system /sys/devices/system/cpu/cpufreq/policy0/walt/hispeed_freq
|
||||
chmod 0660 /sys/devices/system/cpu/cpufreq/policy0/walt/hispeed_freq
|
||||
chown root.system /sys/devices/system/cpu/cpufreq/policy0/walt/rtg_boost_freq
|
||||
chmod 0660 /sys/devices/system/cpu/cpufreq/policy0/walt/rtg_boost_freq
|
||||
chown root.system /sys/devices/system/cpu/cpufreq/policy0/walt/pl
|
||||
chmod 0660 /sys/devices/system/cpu/cpufreq/policy0/walt/pl
|
||||
|
||||
echo s2idle > /sys/power/mem_sleep
|
||||
echo N > /sys/devices/system/cpu/qcom_lpm/parameters/sleep_disabled
|
||||
|
||||
model_name=`getprop ro.product.device`
|
||||
|
||||
if [ $model_name == "b6q" ]; then
|
||||
echo 608 > /sys/devices/system/cpu/cpufreq/policy0/walt/target_load_thresh
|
||||
echo 837 > /sys/devices/system/cpu/cpufreq/policy2/walt/target_load_thresh
|
||||
echo 891 > /sys/devices/system/cpu/cpufreq/policy5/walt/target_load_thresh
|
||||
echo 806 > /sys/devices/system/cpu/cpufreq/policy7/walt/target_load_thresh
|
||||
|
||||
echo 15000 > /sys/devices/system/cpu/cpufreq/policy0/walt/up_rate_limit_us
|
||||
echo 15000 > /sys/devices/system/cpu/cpufreq/policy2/walt/up_rate_limit_us
|
||||
echo 15000 > /sys/devices/system/cpu/cpufreq/policy5/walt/up_rate_limit_us
|
||||
echo 15000 > /sys/devices/system/cpu/cpufreq/policy7/walt/up_rate_limit_us
|
||||
echo 1344000 > /sys/devices/system/cpu/cpufreq/policy0/walt/up_delay_freq
|
||||
echo 2572800 > /sys/devices/system/cpu/cpufreq/policy2/walt/up_delay_freq
|
||||
echo 2572800 > /sys/devices/system/cpu/cpufreq/policy5/walt/up_delay_freq
|
||||
echo 2630400 > /sys/devices/system/cpu/cpufreq/policy7/walt/up_delay_freq
|
||||
|
||||
echo 0 > /sys/devices/system/cpu/cpufreq/policy0/walt/pl
|
||||
|
||||
echo 1 > /proc/sys/walt/sched_conservative_pl
|
||||
|
||||
echo 50 85 85 > /proc/sys/walt/sched_downmigrate
|
||||
echo 59 95 95 > /proc/sys/walt/sched_upmigrate
|
||||
|
||||
echo 20 > /dev/cpuctl/background/cpu.uclamp.max
|
||||
|
||||
echo 1804800 2707200 2707200 2147483647 > /proc/sys/walt/sched_fmax_cap
|
||||
|
||||
echo 51 > /proc/sys/walt/sched_min_task_util_for_boost
|
||||
echo 51 > /proc/sys/walt/sched_min_task_util_for_uclamp
|
||||
echo 35 > /proc/sys/walt/sched_min_task_util_for_colocation
|
||||
|
||||
chown root.system /sys/devices/system/cpu/cpufreq/policy0/walt/up_delay_freq
|
||||
chmod 0660 /sys/devices/system/cpu/cpufreq/policy0/walt/up_delay_freq
|
||||
chown root.system /sys/devices/system/cpu/cpufreq/policy0/walt/target_load_thresh
|
||||
chmod 0660 /sys/devices/system/cpu/cpufreq/policy0/walt/target_load_thresh
|
||||
chown root.system /sys/devices/system/cpu/cpufreq/policy0/walt/up_rate_limit_us
|
||||
chmod 0660 /sys/devices/system/cpu/cpufreq/policy0/walt/up_rate_limit_us
|
||||
chown root.system /sys/devices/system/cpu/cpufreq/policy0/walt/rtg_boost_freq
|
||||
chmod 0664 /sys/devices/system/cpu/cpufreq/policy0/walt/rtg_boost_freq
|
||||
|
||||
chown root.system /sys/devices/system/cpu/cpufreq/policy2/walt/up_delay_freq
|
||||
chmod 0660 /sys/devices/system/cpu/cpufreq/policy2/walt/up_delay_freq
|
||||
chown root.system /sys/devices/system/cpu/cpufreq/policy2/walt/target_load_thresh
|
||||
chmod 0660 /sys/devices/system/cpu/cpufreq/policy2/walt/target_load_thresh
|
||||
chown root.system /sys/devices/system/cpu/cpufreq/policy2/walt/up_rate_limit_us
|
||||
chmod 0660 /sys/devices/system/cpu/cpufreq/policy2/walt/up_rate_limit_us
|
||||
|
||||
chown root.system /sys/devices/system/cpu/cpufreq/policy5/walt/up_delay_freq
|
||||
chmod 0660 /sys/devices/system/cpu/cpufreq/policy5/walt/up_delay_freq
|
||||
chown root.system /sys/devices/system/cpu/cpufreq/policy5/walt/target_load_thresh
|
||||
chmod 0660 /sys/devices/system/cpu/cpufreq/policy5/walt/target_load_thresh
|
||||
chown root.system /sys/devices/system/cpu/cpufreq/policy5/walt/up_rate_limit_us
|
||||
chmod 0660 /sys/devices/system/cpu/cpufreq/policy5/walt/up_rate_limit_us
|
||||
|
||||
chown root.system /sys/devices/system/cpu/cpufreq/policy7/walt/up_delay_freq
|
||||
chmod 0660 /sys/devices/system/cpu/cpufreq/policy7/walt/up_delay_freq
|
||||
chown root.system /sys/devices/system/cpu/cpufreq/policy7/walt/target_load_thresh
|
||||
chmod 0660 /sys/devices/system/cpu/cpufreq/policy7/walt/target_load_thresh
|
||||
chown root.system /sys/devices/system/cpu/cpufreq/policy7/walt/up_rate_limit_us
|
||||
chmod 0660 /sys/devices/system/cpu/cpufreq/policy7/walt/up_rate_limit_us
|
||||
|
||||
chown root.system /sys/devices/system/cpu/cpufreq/policy0/walt/pl
|
||||
chmod 0660 /sys/devices/system/cpu/cpufreq/policy0/walt/pl
|
||||
|
||||
chown root.system /dev/cpuctl/background/cpu.uclamp.max
|
||||
chmod 0660 /dev/cpuctl/background/cpu.uclamp.max
|
||||
fi
|
||||
|
||||
# Enable dynamic prefetcher
|
||||
if [ $model_name == "b6q" ] || [ $model_name == "q6q" ] || [ $model_name == "q6aq" ]; then
|
||||
chown root.system /sys/devices/system/cpu/dynpf/enable_dynpf
|
||||
chmod 0660 /sys/devices/system/cpu/dynpf/enable_dynpf
|
||||
echo 1 > /sys/devices/system/cpu/dynpf/enable_dynpf
|
||||
fi
|
||||
|
||||
echo 4 > /proc/sys/kernel/printk
|
||||
|
||||
# SED data dump
|
||||
factory=`getprop ro.factory.factory_binary`
|
||||
if [ "$factory" == "factory" ] && [ ! -e /data/local/tmp/SED_DDR_DATA_* ]; then
|
||||
ap_serial=`getprop ro.boot.ap_serial`
|
||||
soc_model=`getprop ro.soc.model`
|
||||
dram_info=`getprop ro.boot.dram_info`
|
||||
sed_dump_file=/data/local/tmp/SED_DDR_DATA_$soc_model'_'$dram_info'_'$ap_serial.BIN
|
||||
dd if=/dev/block/bootdevice/by-name/ddr of=$sed_dump_file bs=1024 count=256
|
||||
chown shell:shell $sed_dump_file
|
||||
chmod 755 $sed_dump_file
|
||||
fi
|
||||
|
||||
# Change console log level as per console config property
|
||||
console_config=`getprop persist.vendor.console.silent.config`
|
||||
case "$console_config" in
|
||||
"1")
|
||||
echo "Enable console config to $console_config"
|
||||
echo 0 > /proc/sys/kernel/printk
|
||||
;;
|
||||
*)
|
||||
echo "Enable console config to $console_config"
|
||||
;;
|
||||
esac
|
||||
|
||||
setprop vendor.post_boot.parsed 1
|
||||
215
rootdir/bin/init.kernel.post_boot.sh
Normal file
215
rootdir/bin/init.kernel.post_boot.sh
Normal file
@@ -0,0 +1,215 @@
|
||||
#=============================================================================
|
||||
# Copyright (c) 2019-2023 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
# Copyright (c) 2009-2012, 2014-2019, The Linux Foundation. All rights reserved.
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions are met:
|
||||
# * Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# * Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in the
|
||||
# documentation and/or other materials provided with the distribution.
|
||||
# * Neither the name of The Linux Foundation nor
|
||||
# the names of its contributors may be used to endorse or promote
|
||||
# products derived from this software without specific prior written
|
||||
# permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
# NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
|
||||
# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
||||
# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
|
||||
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
|
||||
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
||||
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
|
||||
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
|
||||
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
#=============================================================================
|
||||
|
||||
function configure_zram_parameters() {
|
||||
MemTotalStr=`cat /proc/meminfo | grep MemTotal`
|
||||
MemTotal=${MemTotalStr:16:8}
|
||||
|
||||
low_ram=`getprop ro.config.low_ram`
|
||||
|
||||
|
||||
let RamSizeGB="( $MemTotal / 1048576 ) + 1"
|
||||
diskSizeUnit=M
|
||||
# Zram disk - 75%
|
||||
let zRamSizeMB="( $RamSizeGB * 1024 ) * 3 / 4"
|
||||
|
||||
# use MB avoid 32 bit overflow
|
||||
if [ $zRamSizeMB -gt 6144 ]; then
|
||||
let zRamSizeMB=6144
|
||||
fi
|
||||
|
||||
# And enable lz4 zram compression for Go targets.
|
||||
if [ "$low_ram" == "true" ]; then
|
||||
echo lz4 > /sys/block/zram0/comp_algorithm
|
||||
fi
|
||||
|
||||
if [ -f /sys/block/zram0/disksize ]; then
|
||||
if [ -f /sys/block/zram0/use_dedup ]; then
|
||||
echo 1 > /sys/block/zram0/use_dedup
|
||||
fi
|
||||
echo "$zRamSizeMB""$diskSizeUnit" > /sys/block/zram0/disksize
|
||||
|
||||
# ZRAM may use more memory than it saves if SLAB_STORE_USER
|
||||
# debug option is enabled.
|
||||
if [ -e /sys/kernel/slab/zs_handle ]; then
|
||||
echo 0 > /sys/kernel/slab/zs_handle/store_user
|
||||
fi
|
||||
if [ -e /sys/kernel/slab/zspage ]; then
|
||||
echo 0 > /sys/kernel/slab/zspage/store_user
|
||||
fi
|
||||
|
||||
mkswap /dev/block/zram0
|
||||
swapon /dev/block/zram0 -p 32758
|
||||
fi
|
||||
}
|
||||
|
||||
verify_pasr_support()
|
||||
{
|
||||
ddr_type=`od -An -tx /proc/device-tree/memory/ddr_device_type`
|
||||
ddr_type5="08"
|
||||
|
||||
if [ -d /sys/kernel/mem-offline ]; then
|
||||
#only LPDDR5 supports PAAR
|
||||
if [ ${ddr_type:4:2} != $ddr_type5 ]; then
|
||||
setprop vendor.pasr.activemode.enabled false
|
||||
fi
|
||||
|
||||
setprop vendor.pasr.enabled true
|
||||
echo "pasr-enabled"
|
||||
fi
|
||||
}
|
||||
|
||||
function configure_read_ahead_kb_values() {
|
||||
MemTotalStr=`cat /proc/meminfo | grep MemTotal`
|
||||
MemTotal=${MemTotalStr:16:8}
|
||||
|
||||
dmpts=$(ls /sys/block/*/queue/read_ahead_kb | grep -e dm -e mmc -e sd)
|
||||
# dmpts holds below read_ahead_kb nodes if exists:
|
||||
# /sys/block/dm-0/queue/read_ahead_kb to /sys/block/dm-10/queue/read_ahead_kb
|
||||
# /sys/block/sda/queue/read_ahead_kb to /sys/block/sdh/queue/read_ahead_kb
|
||||
|
||||
# Set 128 for <= 4GB &
|
||||
# set 512 for >= 5GB targets.
|
||||
if [ $MemTotal -le 4194304 ]; then
|
||||
ra_kb=128
|
||||
else
|
||||
ra_kb=512
|
||||
fi
|
||||
if [ -f /sys/block/mmcblk0/bdi/read_ahead_kb ]; then
|
||||
echo $ra_kb > /sys/block/mmcblk0/bdi/read_ahead_kb
|
||||
fi
|
||||
if [ -f /sys/block/mmcblk0rpmb/bdi/read_ahead_kb ]; then
|
||||
echo $ra_kb > /sys/block/mmcblk0rpmb/bdi/read_ahead_kb
|
||||
fi
|
||||
for dm in $dmpts; do
|
||||
if [ `cat $(dirname $dm)/../removable` -eq 0 ]; then
|
||||
echo $ra_kb > $dm
|
||||
fi
|
||||
done
|
||||
}
|
||||
|
||||
function configure_memory_parameters() {
|
||||
# Set Memory parameters.
|
||||
#
|
||||
# Set per_process_reclaim tuning parameters
|
||||
# All targets will use vmpressure range 50-70,
|
||||
# All targets will use 512 pages swap size.
|
||||
#
|
||||
# Set Low memory killer minfree parameters
|
||||
# 32 bit Non-Go, all memory configurations will use 15K series
|
||||
# 32 bit Go, all memory configurations will use uLMK + Memcg
|
||||
# 64 bit will use Google default LMK series.
|
||||
#
|
||||
# Set ALMK parameters (usually above the highest minfree values)
|
||||
# vmpressure_file_min threshold is always set slightly higher
|
||||
# than LMK minfree's last bin value for all targets. It is calculated as
|
||||
# vmpressure_file_min = (last bin - second last bin ) + last bin
|
||||
#
|
||||
# Set allocstall_threshold to 0 for all targets.
|
||||
#
|
||||
|
||||
#configure_zram_parameters
|
||||
configure_read_ahead_kb_values
|
||||
#echo 100 > /proc/sys/vm/swappiness
|
||||
|
||||
# Disable periodic kcompactd wakeups. We do not use THP, so having many
|
||||
# huge pages is not as necessary.
|
||||
echo 0 > /proc/sys/vm/compaction_proactiveness
|
||||
|
||||
MemTotalStr=`cat /proc/meminfo | grep MemTotal`
|
||||
MemTotal=${MemTotalStr:16:8}
|
||||
let RamSizeGB="( $MemTotal / 1048576 ) + 1"
|
||||
|
||||
have_pasr=$(verify_pasr_support)
|
||||
if [ -z $have_pasr ]; then
|
||||
## Goal is to allow all allocations to use THP whilst minimizing allocaiton delays
|
||||
# Allow all eligibe page faults to use THP
|
||||
echo always > /sys/kernel/mm/transparent_hugepage/enabled
|
||||
# Prevent page faults on THP-elgible VMAs from causing reclaim or compaction
|
||||
echo never > /sys/kernel/mm/transparent_hugepage/defrag
|
||||
|
||||
## Goal is to make khugepaged as inert as possible using the below settings
|
||||
# Prevent khugepaged from doing reclaim or compaction
|
||||
echo 0 > /sys/kernel/mm/transparent_hugepage/khugepaged/defrag
|
||||
# Minimize the number of pages that khugepaged will scan
|
||||
echo 1 > /sys/kernel/mm/transparent_hugepage/khugepaged/pages_to_scan
|
||||
# Maximize the amount of time that khugepaged is asleep for
|
||||
echo 4294967295 > /sys/kernel/mm/transparent_hugepage/khugepaged/scan_sleep_millisecs
|
||||
echo 4294967295 > /sys/kernel/mm/transparent_hugepage/khugepaged/alloc_sleep_millisecs
|
||||
# Restrict khugepaged promotions as much as possible. Only allow khugepaged to promote
|
||||
# if all pages in a VMA are (1) not invalid PTEs, (2) not swapped out PTEs, (3) not
|
||||
# shared PTEs.
|
||||
echo 0 > /sys/kernel/mm/transparent_hugepage/khugepaged/max_ptes_none
|
||||
echo 0 > /sys/kernel/mm/transparent_hugepage/khugepaged/max_ptes_swap
|
||||
echo 0 > /sys/kernel/mm/transparent_hugepage/khugepaged/max_ptes_shared
|
||||
else
|
||||
# Do not enable THP is PASR is enabled
|
||||
echo never > /sys/kernel/mm/transparent_hugepage/enabled
|
||||
fi
|
||||
|
||||
# Set the min_free_kbytes to standard kernel value
|
||||
if [ $RamSizeGB -ge 8 ]; then
|
||||
echo 11584 > /proc/sys/vm/min_free_kbytes
|
||||
elif [ $RamSizeGB -ge 4 ]; then
|
||||
echo 8192 > /proc/sys/vm/min_free_kbytes
|
||||
elif [ $RamSizeGB -ge 2 ]; then
|
||||
echo 5792 > /proc/sys/vm/min_free_kbytes
|
||||
else
|
||||
echo 4096 > /proc/sys/vm/min_free_kbytes
|
||||
fi
|
||||
|
||||
#Set per-app max kgsl reclaim limit and per shrinker call limit
|
||||
if [ -f /sys/class/kgsl/kgsl/page_reclaim_per_call ]; then
|
||||
echo 38400 > /sys/class/kgsl/kgsl/page_reclaim_per_call
|
||||
fi
|
||||
# if [ -f /sys/class/kgsl/kgsl/max_reclaim_limit ]; then
|
||||
# echo 51200 > /sys/class/kgsl/kgsl/max_reclaim_limit
|
||||
# fi
|
||||
}
|
||||
|
||||
configure_memory_parameters
|
||||
|
||||
if [ -f /sys/devices/soc0/soc_id ]; then
|
||||
platformid=`cat /sys/devices/soc0/soc_id`
|
||||
fi
|
||||
|
||||
case "$platformid" in
|
||||
"557"|"577")
|
||||
/vendor/bin/sh /vendor/bin/init.kernel.post_boot-pineapple.sh
|
||||
;;
|
||||
"614"|"632")
|
||||
/vendor/bin/sh /vendor/bin/init.kernel.post_boot-cliffs.sh
|
||||
;;
|
||||
*)
|
||||
echo "***WARNING***: Invalid SoC ID\n\t No postboot settings applied!!\n"
|
||||
;;
|
||||
esac
|
||||
216
rootdir/bin/init.qcom.class_core.sh
Normal file
216
rootdir/bin/init.qcom.class_core.sh
Normal file
@@ -0,0 +1,216 @@
|
||||
#!/vendor/bin/sh
|
||||
|
||||
# Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions are met:
|
||||
# * Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# * Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in the
|
||||
# documentation and/or other materials provided with the distribution.
|
||||
# * Neither the name of The Linux Foundation nor
|
||||
# the names of its contributors may be used to endorse or promote
|
||||
# products derived from this software without specific prior written
|
||||
# permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
# NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
|
||||
# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
||||
# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
|
||||
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
|
||||
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
||||
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
|
||||
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
|
||||
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
|
||||
# Set platform variables
|
||||
target=`getprop ro.board.platform`
|
||||
if [ -f /sys/devices/soc0/hw_platform ]; then
|
||||
soc_hwplatform=`cat /sys/devices/soc0/hw_platform` 2> /dev/null
|
||||
else
|
||||
soc_hwplatform=`cat /sys/devices/system/soc/soc0/hw_platform` 2> /dev/null
|
||||
fi
|
||||
if [ -f /sys/devices/soc0/soc_id ]; then
|
||||
soc_hwid=`cat /sys/devices/soc0/soc_id` 2> /dev/null
|
||||
else
|
||||
soc_hwid=`cat /sys/devices/system/soc/soc0/id` 2> /dev/null
|
||||
fi
|
||||
if [ -f /sys/devices/soc0/platform_version ]; then
|
||||
soc_hwver=`cat /sys/devices/soc0/platform_version` 2> /dev/null
|
||||
else
|
||||
soc_hwver=`cat /sys/devices/system/soc/soc0/platform_version` 2> /dev/null
|
||||
fi
|
||||
|
||||
|
||||
# Dynamic Memory Managment (DMM) provides a sys file system to the userspace
|
||||
# that can be used to plug in/out memory that has been configured as unstable.
|
||||
# This unstable memory can be in Active or In-Active State.
|
||||
# Each of which the userspace can request by writing to a sys file.
|
||||
#
|
||||
# ro.dev.dmm = 1; Indicates that DMM is enabled in the Android User Space. This
|
||||
# property is set in the Android system properties file.
|
||||
#
|
||||
# If ro.dev.dmm.dpd.start_address is set here then the target has a memory
|
||||
# configuration that supports DynamicMemoryManagement.
|
||||
init_DMM()
|
||||
{
|
||||
block=-1
|
||||
|
||||
case "$target" in
|
||||
"msm7630_surf" | "msm7630_1x" | "msm7630_fusion" | "msm8960")
|
||||
;;
|
||||
*)
|
||||
return
|
||||
;;
|
||||
esac
|
||||
|
||||
mem="/sys/devices/system/memory"
|
||||
op=`cat $mem/movable_start_bytes`
|
||||
case "$op" in
|
||||
"0")
|
||||
log -p i -t DMM DMM Disabled. movable_start_bytes not set: $op
|
||||
;;
|
||||
|
||||
"$mem/movable_start_bytes: No such file or directory ")
|
||||
log -p i -t DMM DMM Disabled. movable_start_bytes does not exist: $op
|
||||
;;
|
||||
|
||||
*)
|
||||
log -p i -t DMM DMM available. movable_start_bytes at $op
|
||||
movable_start_bytes=0x`cat $mem/movable_start_bytes`
|
||||
block_size_bytes=0x`cat $mem/block_size_bytes`
|
||||
block=$((#${movable_start_bytes}/${block_size_bytes}))
|
||||
|
||||
chown -h system.system $mem/memory$block/state
|
||||
chown -h system.system $mem/probe
|
||||
chown -h system.system $mem/active
|
||||
chown -h system.system $mem/remove
|
||||
|
||||
case "$target" in
|
||||
"msm7630_surf" | "msm7630_1x" | "msm7630_fusion")
|
||||
echo $movable_start_bytes > $mem/probe
|
||||
case "$?" in
|
||||
"0")
|
||||
log -p i -t DMM $movable_start_bytes to physical hotplug succeeded.
|
||||
;;
|
||||
*)
|
||||
log -p e -t DMM $movable_start_bytes to physical hotplug failed.
|
||||
return
|
||||
;;
|
||||
esac
|
||||
|
||||
echo online > $mem/memory$block/state
|
||||
case "$?" in
|
||||
"0")
|
||||
log -p i -t DMM \'echo online\' to logical hotplug succeeded.
|
||||
;;
|
||||
*)
|
||||
log -p e -t DMM \'echo online\' to logical hotplug failed.
|
||||
return
|
||||
;;
|
||||
esac
|
||||
;;
|
||||
esac
|
||||
|
||||
setprop ro.dev.dmm.dpd.start_address $movable_start_bytes
|
||||
setprop ro.dev.dmm.dpd.block $block
|
||||
;;
|
||||
esac
|
||||
|
||||
case "$target" in
|
||||
"msm8960")
|
||||
return
|
||||
;;
|
||||
esac
|
||||
|
||||
# For 7X30 targets:
|
||||
# ro.dev.dmm.dpd.start_address is set when the target has a 2x256Mb memory
|
||||
# configuration. This is also used to indicate that the target is capable of
|
||||
# setting EBI-1 to Deep Power Down or Self Refresh.
|
||||
op=`cat $mem/low_power_memory_start_bytes`
|
||||
case "$op" in
|
||||
"0")
|
||||
log -p i -t DMM Self-Refresh-Only Disabled. low_power_memory_start_bytes not set:$op
|
||||
;;
|
||||
"$mem/low_power_memory_start_bytes No such file or directory ")
|
||||
log -p i -t DMM Self-Refresh-Only Disabled. low_power_memory_start_bytes does not exist:$op
|
||||
;;
|
||||
*)
|
||||
log -p i -t DMM Self-Refresh-Only available. low_power_memory_start_bytes at $op
|
||||
;;
|
||||
esac
|
||||
}
|
||||
|
||||
#
|
||||
# For controlling console and shell on console on 8960 - perist.serial.enable 8960
|
||||
# On other target use default ro.debuggable property.
|
||||
#
|
||||
serial=`getprop persist.serial.enable`
|
||||
dserial=`getprop ro.debuggable`
|
||||
case "$target" in
|
||||
"msm8960")
|
||||
case "$serial" in
|
||||
"0")
|
||||
echo 0 > /sys/devices/platform/msm_serial_hsl.0/console
|
||||
;;
|
||||
"1")
|
||||
echo 1 > /sys/devices/platform/msm_serial_hsl.0/console
|
||||
start console
|
||||
;;
|
||||
*)
|
||||
case "$dserial" in
|
||||
"1")
|
||||
start console
|
||||
;;
|
||||
esac
|
||||
;;
|
||||
esac
|
||||
;;
|
||||
|
||||
"msm8610" | "msm8974" | "msm8226")
|
||||
case "$serial" in
|
||||
"0")
|
||||
echo 0 > /sys/devices/f991f000.serial/console
|
||||
;;
|
||||
"1")
|
||||
echo 1 > /sys/devices/f991f000.serial/console
|
||||
start console
|
||||
;;
|
||||
*)
|
||||
case "$dserial" in
|
||||
"1")
|
||||
start console
|
||||
;;
|
||||
esac
|
||||
;;
|
||||
esac
|
||||
;;
|
||||
*)
|
||||
case "$dserial" in
|
||||
"1")
|
||||
start console
|
||||
;;
|
||||
esac
|
||||
;;
|
||||
esac
|
||||
|
||||
case "$target" in
|
||||
"msm7630_surf" | "msm7630_1x" | "msm7630_fusion")
|
||||
insmod /system/lib/modules/ss_mfcinit.ko
|
||||
insmod /system/lib/modules/ss_vencoder.ko
|
||||
insmod /system/lib/modules/ss_vdecoder.ko
|
||||
chmod -h 0666 /dev/ss_mfc_reg
|
||||
chmod -h 0666 /dev/ss_vdec
|
||||
chmod -h 0666 /dev/ss_venc
|
||||
|
||||
init_DMM
|
||||
;;
|
||||
|
||||
"msm8960")
|
||||
init_DMM
|
||||
;;
|
||||
esac
|
||||
115
rootdir/bin/init.qcom.coex.sh
Normal file
115
rootdir/bin/init.qcom.coex.sh
Normal file
@@ -0,0 +1,115 @@
|
||||
#! /vendor/bin/sh
|
||||
|
||||
# Copyright (c) 2009-2010, 2012, The Linux Foundation. All rights reserved.
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions are met:
|
||||
# * Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# * Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in the
|
||||
# documentation and/or other materials provided with the distribution.
|
||||
# * Neither the name of The Linux Foundation nor
|
||||
# the names of its contributors may be used to endorse or promote
|
||||
# products derived from this software without specific prior written
|
||||
# permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
# NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
|
||||
# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
||||
# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
|
||||
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
|
||||
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
||||
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
|
||||
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
|
||||
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
|
||||
LOG_TAG="qcom-bt-wlan-coex"
|
||||
LOG_NAME="${0}:"
|
||||
|
||||
coex_pid=""
|
||||
ath_wlan_supported=`getprop wlan.driver.ath`
|
||||
|
||||
loge ()
|
||||
{
|
||||
/system/bin/log -t $LOG_TAG -p e "$LOG_NAME $@"
|
||||
}
|
||||
|
||||
logi ()
|
||||
{
|
||||
/system/bin/log -t $LOG_TAG -p i "$LOG_NAME $@"
|
||||
}
|
||||
|
||||
failed ()
|
||||
{
|
||||
loge "$1: exit code $2"
|
||||
exit $2
|
||||
}
|
||||
|
||||
start_coex ()
|
||||
{
|
||||
case "$ath_wlan_supported" in
|
||||
"2")
|
||||
echo "ATH WLAN Chip ID AR6004 is enabled"
|
||||
/system/bin/abtfilt -d -z -n -m -a -w wlan0 &
|
||||
;;
|
||||
"1")
|
||||
echo "ATH WLAN Chip ID is enabled"
|
||||
# Must have -d -z -n -v -s -w wlan0 parameters for atheros btfilter.
|
||||
/system/bin/abtfilt -d -z -n -v -q -s -w wlan0 &
|
||||
;;
|
||||
"0")
|
||||
echo "WCN WLAN Chip ID is enabled"
|
||||
# Must have -o turned on to avoid daemon (otherwise we cannot get pid)
|
||||
/system/bin/btwlancoex -o $opt_flags &
|
||||
;;
|
||||
*)
|
||||
echo "NO WLAN Chip ID is enabled, so enabling ATH as default"
|
||||
# Must have -d -z -n -v -s -w wlan0 parameters for atheros btfilter.
|
||||
/system/bin/abtfilt -d -z -n -v -q -s -w wlan0 &
|
||||
;;
|
||||
esac
|
||||
coex_pid=$!
|
||||
logi "start_coex: pid = $coex_pid"
|
||||
}
|
||||
|
||||
kill_coex ()
|
||||
{
|
||||
logi "kill_coex: pid = $coex_pid"
|
||||
kill -TERM $coex_pid
|
||||
# this shell doesn't exit now -- wait returns for normal exit
|
||||
}
|
||||
|
||||
# mimic coex options parsing -- maybe a waste of effort
|
||||
USAGE="${0} [-o] [-c] [-r] [-i] [-h]"
|
||||
|
||||
while getopts "ocrih" f
|
||||
do
|
||||
case $f in
|
||||
o | c | r | i | h) opt_flags="$opt_flags -$f" ;;
|
||||
\?) echo $USAGE; exit 1;;
|
||||
esac
|
||||
done
|
||||
|
||||
# init does SIGTERM on ctl.stop for service
|
||||
trap "kill_coex" TERM INT
|
||||
|
||||
#Selectively start coex module
|
||||
target=`getprop ro.board.platform`
|
||||
|
||||
if [ "$target" == "msm8960" ] && [ "$ath_wlan_supported" != "2" ]; then
|
||||
logi "btwlancoex/abtfilt is not needed"
|
||||
else
|
||||
# Build settings may not produce the coex executable
|
||||
if ls /system/bin/btwlancoex || ls /system/bin/abtfilt
|
||||
then
|
||||
start_coex
|
||||
wait $coex_pid
|
||||
logi "Coex stopped"
|
||||
else
|
||||
logi "btwlancoex/abtfilt not available"
|
||||
fi
|
||||
fi
|
||||
exit 0
|
||||
35
rootdir/bin/init.qcom.efs.sync.sh
Normal file
35
rootdir/bin/init.qcom.efs.sync.sh
Normal file
@@ -0,0 +1,35 @@
|
||||
#! /vendor/bin/sh
|
||||
|
||||
# Copyright (c) 2012, The Linux Foundation. All rights reserved.
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions are
|
||||
# met:
|
||||
# * Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# * Redistributions in binary form must reproduce the above
|
||||
# copyright notice, this list of conditions and the following
|
||||
# disclaimer in the documentation and/or other materials provided
|
||||
# with the distribution.
|
||||
# * Neither the name of The Linux Foundation nor the names of its
|
||||
# contributors may be used to endorse or promote products derived
|
||||
# from this software without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
|
||||
# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
|
||||
# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
|
||||
# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
||||
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
|
||||
# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
||||
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
|
||||
# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
|
||||
# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
#
|
||||
|
||||
PATH=/system/bin:$PATH
|
||||
export PATH
|
||||
cat /sys/devices/platform/rs300000a7.65536/force_sync
|
||||
cat /sys/devices/platform/rs300100a7.65536/force_sync
|
||||
3
rootdir/bin/init.qcom.post_boot.sh
Executable file → Normal file
3
rootdir/bin/init.qcom.post_boot.sh
Executable file → Normal file
@@ -4660,6 +4660,8 @@ case "$target" in
|
||||
echo N > /sys/module/lpm_levels/parameters/sleep_disabled
|
||||
fi
|
||||
echo N > /sys/module/lpm_levels/parameters/sleep_disabled
|
||||
# Starting io prefetcher service
|
||||
start iop
|
||||
|
||||
# Set Memory parameters
|
||||
configure_memory_parameters
|
||||
@@ -5422,6 +5424,7 @@ case "$target" in
|
||||
echo 5 > /proc/sys/kernel/sched_spill_nr_run
|
||||
echo 1 > /proc/sys/kernel/sched_restrict_cluster_spill
|
||||
echo 1 > /proc/sys/kernel/sched_prefer_sync_wakee_to_waker
|
||||
start iop
|
||||
|
||||
# disable thermal bcl hotplug to switch governor
|
||||
echo 0 > /sys/module/msm_thermal/core_control/enabled
|
||||
|
||||
78
rootdir/bin/init.qcom.sdio.sh
Normal file
78
rootdir/bin/init.qcom.sdio.sh
Normal file
@@ -0,0 +1,78 @@
|
||||
#! /vendor/bin/sh
|
||||
|
||||
# Copyright (c) 2010, The Linux Foundation. All rights reserved.
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions are
|
||||
# met:
|
||||
# * Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# * Redistributions in binary form must reproduce the above
|
||||
# copyright notice, this list of conditions and the following
|
||||
# disclaimer in the documentation and/or other materials provided
|
||||
# with the distribution.
|
||||
# * Neither the name of The Linux Foundation nor the names of its
|
||||
# contributors may be used to endorse or promote products derived
|
||||
# from this software without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
|
||||
# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
|
||||
# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
|
||||
# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
||||
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
|
||||
# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
||||
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
|
||||
# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
|
||||
# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
|
||||
# For successful WLAN card detection, WLAN needs SDIO polling turned on.
|
||||
# This script can be used to turn on/off SDIO polling on appropriate
|
||||
# SDIO slot on the MSM target (e.g. slot 3 on 7x30 surf).
|
||||
|
||||
arg=$1
|
||||
target=`getprop ro.board.platform`
|
||||
|
||||
case "$target" in
|
||||
"msm7627_6x")
|
||||
echo 1 > /sys/devices/platform/msm_sdcc.1/polling
|
||||
echo 1 > /sys/devices/platform/msm_sdcc.2/polling
|
||||
;;
|
||||
|
||||
"msm7627_ffa")
|
||||
echo 1 > /sys/devices/platform/msm_sdcc.2/polling
|
||||
;;
|
||||
|
||||
"msm7627_surf")
|
||||
echo 1 > /sys/devices/platform/msm_sdcc.1/polling
|
||||
echo 1 > /sys/devices/platform/msm_sdcc.2/polling
|
||||
;;
|
||||
|
||||
"msm7627a")
|
||||
echo 1 > /sys/devices/platform/msm_sdcc.2/polling
|
||||
;;
|
||||
|
||||
"msm7630_surf")
|
||||
echo 1 > /sys/devices/platform/msm_sdcc.3/polling
|
||||
;;
|
||||
|
||||
"msm7630_1x")
|
||||
echo 1 > /sys/devices/platform/msm_sdcc.3/polling
|
||||
;;
|
||||
|
||||
"msm7630_fusion")
|
||||
echo 1 > /sys/devices/platform/msm_sdcc.3/polling
|
||||
;;
|
||||
|
||||
"msm8660")
|
||||
echo 1 > /sys/devices/platform/msm_sdcc.4/polling
|
||||
;;
|
||||
|
||||
"msm8660_csfb")
|
||||
echo 1 > /sys/devices/platform/msm_sdcc.4/polling
|
||||
;;
|
||||
esac
|
||||
|
||||
exit 0
|
||||
33
rootdir/bin/init.qcom.sensors.sh
Normal file
33
rootdir/bin/init.qcom.sensors.sh
Normal file
@@ -0,0 +1,33 @@
|
||||
#!/vendor/bin/sh
|
||||
# Copyright (c) 2020 The Linux Foundation. All rights reserved.
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions are met:
|
||||
# * Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# * Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in the
|
||||
# documentation and/or other materials provided with the distribution.
|
||||
# * Neither the name of The Linux Foundation nor
|
||||
# the names of its contributors may be used to endorse or promote
|
||||
# products derived from this software without specific prior written
|
||||
# permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
# NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
|
||||
# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
||||
# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
|
||||
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
|
||||
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
||||
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
|
||||
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
|
||||
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
|
||||
#
|
||||
# Function to start sensors for SSC enabled platforms
|
||||
#
|
||||
cp /vendor/etc/sensors/scripts/* /data/vendor/sensors/scripts/
|
||||
chmod a+rw /data/vendor/sensors/scripts/*
|
||||
200
rootdir/bin/init.qcom.usb.sh
Normal file
200
rootdir/bin/init.qcom.usb.sh
Normal file
@@ -0,0 +1,200 @@
|
||||
#!/vendor/bin/sh
|
||||
# Copyright (c) 2012-2018, 2020-2021 The Linux Foundation. All rights reserved.
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions are
|
||||
# met:
|
||||
# * Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# * Redistributions in binary form must reproduce the above
|
||||
# copyright notice, this list of conditions and the following
|
||||
# disclaimer in the documentation and/or other materials provided
|
||||
# with the distribution.
|
||||
# * Neither the name of The Linux Foundation nor the names of its
|
||||
# contributors may be used to endorse or promote products derived
|
||||
# from this software without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
|
||||
# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
|
||||
# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
|
||||
# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
||||
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
|
||||
# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
||||
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
|
||||
# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
|
||||
# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
|
||||
# Changes from Qualcomm Innovation Center are provided under the following license:
|
||||
# Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
# SPDX-License-Identifier: BSD-3-Clause-Clear
|
||||
#
|
||||
|
||||
# Set platform variables
|
||||
soc_hwplatform=`cat /sys/devices/soc0/hw_platform 2> /dev/null`
|
||||
soc_machine=`cat /sys/devices/soc0/machine 2> /dev/null`
|
||||
soc_machine=${soc_machine:0:2}
|
||||
soc_id=`cat /sys/devices/soc0/soc_id 2> /dev/null`
|
||||
|
||||
#
|
||||
# Check ESOC for external modem
|
||||
#
|
||||
# Note: currently only a single MDM/SDX is supported
|
||||
#
|
||||
esoc_name=`cat /sys/bus/esoc/devices/esoc0/esoc_name 2> /dev/null`
|
||||
|
||||
target=`getprop ro.board.platform`
|
||||
|
||||
#
|
||||
# Override USB default composition
|
||||
#
|
||||
if [ "$(getprop ro.build.type)" != "user" ]; then
|
||||
# If USB persist config not set, set default configuration
|
||||
if [ "$(getprop persist.vendor.usb.config)" == "" ]; then
|
||||
if [ "$esoc_name" != "" ]; then
|
||||
setprop persist.vendor.usb.config diag,diag_mdm,qdss,qdss_mdm,serial_cdev,dpl,rmnet,adb
|
||||
else
|
||||
case "$(getprop ro.baseband)" in
|
||||
"apq")
|
||||
setprop persist.vendor.usb.config diag,adb
|
||||
;;
|
||||
*)
|
||||
case "$soc_hwplatform" in
|
||||
"Dragon" | "SBC")
|
||||
setprop persist.vendor.usb.config diag,adb
|
||||
;;
|
||||
*)
|
||||
case "$soc_machine" in
|
||||
"SA")
|
||||
setprop persist.vendor.usb.config diag,adb
|
||||
;;
|
||||
*)
|
||||
case "$target" in
|
||||
"msm8996")
|
||||
setprop persist.vendor.usb.config diag,serial_cdev,serial_tty,rmnet_ipa,mass_storage,adb
|
||||
;;
|
||||
"msm8909")
|
||||
setprop persist.vendor.usb.config diag,serial_smd,rmnet_qti_bam,adb
|
||||
;;
|
||||
"msm8937")
|
||||
if [ -d /config/usb_gadget ]; then
|
||||
setprop persist.vendor.usb.config diag,serial_cdev,rmnet,dpl,adb
|
||||
else
|
||||
case "$soc_id" in
|
||||
"313" | "320")
|
||||
setprop persist.vendor.usb.config diag,serial_smd,rmnet_ipa,adb
|
||||
;;
|
||||
*)
|
||||
setprop persist.vendor.usb.config diag,serial_smd,rmnet_qti_bam,adb
|
||||
;;
|
||||
esac
|
||||
fi
|
||||
;;
|
||||
"msm8953")
|
||||
if [ -d /config/usb_gadget ]; then
|
||||
setprop persist.vendor.usb.config diag,serial_cdev,rmnet,dpl,adb
|
||||
else
|
||||
setprop persist.vendor.usb.config diag,serial_smd,rmnet_ipa,adb
|
||||
fi
|
||||
;;
|
||||
"msm8998" | "sdm660" | "apq8098_latv")
|
||||
setprop persist.vendor.usb.config diag,serial_cdev,rmnet,adb
|
||||
;;
|
||||
"sdm845" | "sdm710")
|
||||
setprop persist.vendor.usb.config diag,serial_cdev,rmnet,dpl,adb
|
||||
;;
|
||||
"msmnile" | "sm6150" | "trinket" | "lito" | "atoll" | "bengal" | "lahaina" | "holi" | \
|
||||
"taro" | "kalama" | "pineapple" | "blair")
|
||||
setprop persist.vendor.usb.config diag,adb
|
||||
# setprop persist.vendor.usb.config diag,serial_cdev,rmnet,dpl,qdss,adb
|
||||
;;
|
||||
"gen4")
|
||||
setprop persist.vendor.usb.config adb
|
||||
;;
|
||||
*)
|
||||
setprop persist.vendor.usb.config diag,adb
|
||||
;;
|
||||
esac
|
||||
;;
|
||||
esac
|
||||
;;
|
||||
esac
|
||||
;;
|
||||
esac
|
||||
fi
|
||||
fi
|
||||
else # for user build let persist.sys.usb.config dictate the default composition
|
||||
setprop persist.vendor.usb.config ""
|
||||
fi
|
||||
|
||||
# This check is needed for GKI 1.0 targets where QDSS is not available
|
||||
if [ "$(getprop persist.vendor.usb.config)" == "diag,serial_cdev,rmnet,dpl,qdss,adb" -a \
|
||||
! -d /config/usb_gadget/g1/functions/qdss.qdss ]; then
|
||||
setprop persist.vendor.usb.config diag,serial_cdev,rmnet,dpl,adb
|
||||
fi
|
||||
|
||||
# Start peripheral mode on primary USB controllers for Automotive platforms
|
||||
case "$soc_machine" in
|
||||
"SA")
|
||||
if [ -f /sys/bus/platform/devices/a600000.ssusb/mode ]; then
|
||||
default_mode=`cat /sys/bus/platform/devices/a600000.ssusb/mode`
|
||||
case "$default_mode" in
|
||||
"none")
|
||||
echo peripheral > /sys/bus/platform/devices/a600000.ssusb/mode
|
||||
;;
|
||||
esac
|
||||
fi
|
||||
;;
|
||||
esac
|
||||
|
||||
# check configfs is mounted or not
|
||||
if [ -d /config/usb_gadget ]; then
|
||||
machine_type=`cat /sys/devices/soc0/machine`
|
||||
|
||||
# Chip ID & serial are used for unique MSM identification in Product String
|
||||
# If not present, then omit them instead of using 0x00000000
|
||||
msm_chipid=`cat /sys/devices/soc0/nproduct_id`;
|
||||
if [ "$msm_chipid" != "" ]; then
|
||||
msm_chipid_hex=`printf _CID:%04X $msm_chipid`
|
||||
fi
|
||||
|
||||
msm_serial=`cat /sys/devices/soc0/serial_number`;
|
||||
if [ "$msm_serial" != "" ]; then
|
||||
msm_serial_hex=`printf _SN:%08X $msm_serial`
|
||||
fi
|
||||
|
||||
setprop vendor.usb.product_string "$machine_type-$soc_hwplatform$msm_chipid_hex$msm_serial_hex"
|
||||
|
||||
# ADB requires valid iSerialNumber; if ro.serialno is missing, use dummy
|
||||
serialnumber=`cat /config/usb_gadget/g1/strings/0x409/serialnumber 2> /dev/null`
|
||||
if [ "$serialnumber" == "" ]; then
|
||||
serialno=1234567
|
||||
echo $serialno > /config/usb_gadget/g1/strings/0x409/serialnumber
|
||||
fi
|
||||
setprop vendor.usb.configfs 1
|
||||
fi
|
||||
|
||||
#
|
||||
# Initialize RNDIS Diag option. If unset, set it to 'none'.
|
||||
#
|
||||
diag_extra=`getprop persist.vendor.usb.config.extra`
|
||||
if [ "$diag_extra" == "" ]; then
|
||||
setprop persist.vendor.usb.config.extra none
|
||||
fi
|
||||
|
||||
# enable rps cpus on msm8937 target
|
||||
setprop vendor.usb.rps_mask 0
|
||||
case "$soc_id" in
|
||||
"294" | "295" | "353" | "354")
|
||||
setprop vendor.usb.rps_mask 40
|
||||
;;
|
||||
esac
|
||||
|
||||
#
|
||||
# Initialize UVC conifguration.
|
||||
#
|
||||
if [ -d /config/usb_gadget/g1/functions/uvc.0 ]; then
|
||||
setprop vendor.usb.uvc.function.init 1
|
||||
fi
|
||||
31
rootdir/bin/init.qti.kernel.debug-cliffs.sh
Normal file
31
rootdir/bin/init.qti.kernel.debug-cliffs.sh
Normal file
@@ -0,0 +1,31 @@
|
||||
#=============================================================================
|
||||
# Copyright (c) 2020-2023 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
# Copyright (c) 2014-2017, The Linux Foundation. All rights reserved.
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions are met:
|
||||
# * Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# * Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in the
|
||||
# documentation and/or other materials provided with the distribution.
|
||||
# * Neither the name of The Linux Foundation nor
|
||||
# the names of its contributors may be used to endorse or promote
|
||||
# products derived from this software without specific prior written
|
||||
# permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
# NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
|
||||
# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
||||
# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
|
||||
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
|
||||
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
||||
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
|
||||
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
|
||||
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
#=============================================================================
|
||||
10706
rootdir/bin/init.qti.kernel.debug-pineapple.sh
Normal file
10706
rootdir/bin/init.qti.kernel.debug-pineapple.sh
Normal file
File diff suppressed because it is too large
Load Diff
47
rootdir/bin/init.qti.kernel.debug.sh
Normal file
47
rootdir/bin/init.qti.kernel.debug.sh
Normal file
@@ -0,0 +1,47 @@
|
||||
#=============================================================================
|
||||
# Copyright (c) 2020-2023 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
# Copyright (c) 2014-2017, The Linux Foundation. All rights reserved.
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions are met:
|
||||
# * Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# * Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in the
|
||||
# documentation and/or other materials provided with the distribution.
|
||||
# * Neither the name of The Linux Foundation nor
|
||||
# the names of its contributors may be used to endorse or promote
|
||||
# products derived from this software without specific prior written
|
||||
# permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
# NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
|
||||
# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
||||
# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
|
||||
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
|
||||
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
||||
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
|
||||
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
|
||||
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
#=============================================================================
|
||||
|
||||
if [ -f /sys/devices/soc0/soc_id ]; then
|
||||
platformid=`cat /sys/devices/soc0/soc_id`
|
||||
fi
|
||||
|
||||
case "$platformid" in
|
||||
"557"|"577")
|
||||
/vendor/bin/sh /vendor/bin/init.qti.kernel.debug-pineapple.sh
|
||||
;;
|
||||
"614"|"632")
|
||||
/vendor/bin/sh /vendor/bin/init.qti.kernel.debug-cliffs.sh
|
||||
;;
|
||||
*)
|
||||
echo "***WARNING***: Invalid chip family\n\t skipping debug script!!\n"
|
||||
;;
|
||||
esac
|
||||
206
rootdir/bin/init.qti.kernel.early_debug-pineapple.sh
Normal file
206
rootdir/bin/init.qti.kernel.early_debug-pineapple.sh
Normal file
@@ -0,0 +1,206 @@
|
||||
#=============================================================================
|
||||
# Copyright (c) 2022-2023 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
# Copyright (c) 2014-2017, The Linux Foundation. All rights reserved.
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions are met:
|
||||
# * Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# * Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in the
|
||||
# documentation and/or other materials provided with the distribution.
|
||||
# * Neither the name of The Linux Foundation nor
|
||||
# the names of its contributors may be used to endorse or promote
|
||||
# products derived from this software without specific prior written
|
||||
# permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
# NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
|
||||
# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
||||
# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
|
||||
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
|
||||
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
||||
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
|
||||
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
|
||||
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
#=============================================================================
|
||||
|
||||
enable_sched_events()
|
||||
{
|
||||
local instance=/sys/kernel/tracing
|
||||
|
||||
echo > $instance/trace
|
||||
echo > $instance/set_event
|
||||
|
||||
# timer
|
||||
echo 1 > $instance/events/timer/timer_expire_entry/enable
|
||||
echo 1 > $instance/events/timer/timer_expire_exit/enable
|
||||
echo 1 > $instance/events/timer/hrtimer_cancel/enable
|
||||
echo 1 > $instance/events/timer/hrtimer_expire_entry/enable
|
||||
echo 1 > $instance/events/timer/hrtimer_expire_exit/enable
|
||||
echo 1 > $instance/events/timer/hrtimer_init/enable
|
||||
echo 1 > $instance/events/timer/hrtimer_start/enable
|
||||
#enble FTRACE for softirq events
|
||||
echo 1 > $instance/events/irq/enable
|
||||
#enble FTRACE for Workqueue events
|
||||
echo 1 > $instance/events/workqueue/enable
|
||||
# sched
|
||||
#echo 1 > $instance/events/sched/sched_cpu_hotplug/enable
|
||||
echo 1 > $instance/events/sched/sched_migrate_task/enable
|
||||
echo 1 > $instance/events/sched/sched_pi_setprio/enable
|
||||
echo 1 > $instance/events/sched/sched_switch/enable
|
||||
echo 1 > $instance/events/sched/sched_wakeup/enable
|
||||
echo 1 > $instance/events/sched/sched_wakeup_new/enable
|
||||
echo 1 > $instance/events/schedwalt/halt_cpus/enable
|
||||
echo 1 > $instance/events/schedwalt/halt_cpus_start/enable
|
||||
# hot-plug
|
||||
echo 1 > $instance/events/cpuhp/enable
|
||||
|
||||
echo 1 > $instance/events/power/cpu_frequency/enable
|
||||
|
||||
echo 1 > $instance/tracing_on
|
||||
}
|
||||
|
||||
enable_rproc_events()
|
||||
{
|
||||
local instance=/sys/kernel/tracing/instances/rproc_qcom
|
||||
|
||||
mkdir $instance
|
||||
echo > $instance/trace
|
||||
echo > $instance/set_event
|
||||
|
||||
# enable rproc events as soon as available
|
||||
/vendor/bin/init.qti.write.sh $instance/events/rproc_qcom/enable 1
|
||||
|
||||
echo 1 > $instance/tracing_on
|
||||
}
|
||||
|
||||
# Suspend events are also noisy when going into suspend/resume
|
||||
enable_suspend_events()
|
||||
{
|
||||
local instance=/sys/kernel/tracing/instances/suspend
|
||||
|
||||
mkdir $instance
|
||||
echo > $instance/trace
|
||||
echo > $instance/set_event
|
||||
|
||||
echo 1 > $instance/events/power/suspend_resume/enable
|
||||
echo 1 > $instance/events/power/device_pm_callback_start/enable
|
||||
echo 1 > $instance/events/power/device_pm_callback_end/enable
|
||||
|
||||
echo 1 > $instance/tracing_on
|
||||
}
|
||||
|
||||
enable_clock_reg_events()
|
||||
{
|
||||
local instance=/sys/kernel/tracing/instances/clock_reg
|
||||
|
||||
mkdir $instance
|
||||
echo > $instance/trace
|
||||
echo > $instance/set_event
|
||||
|
||||
# clock
|
||||
echo 1 > $instance/events/clk/enable
|
||||
echo 1 > $instance/events/clk_qcom/enable
|
||||
|
||||
# interconnect
|
||||
echo 1 > $instance/events/interconnect/enable
|
||||
|
||||
# regulator
|
||||
echo 1 > $instance/events/regulator/enable
|
||||
|
||||
# rpmh
|
||||
echo 1 > $instance/events/rpmh/enable
|
||||
|
||||
echo 1 > $instance/tracing_on
|
||||
}
|
||||
|
||||
enable_memory_events()
|
||||
{
|
||||
local instance=/sys/kernel/tracing/instances/memory
|
||||
|
||||
mkdir $instance
|
||||
echo > $instance/trace
|
||||
echo > $instance/set_event
|
||||
|
||||
#memory pressure events/oom
|
||||
#echo 1 > $instance/events/psi/psi_event/enable
|
||||
#echo 1 > $instance/events/psi/psi_window_vmstat/enable
|
||||
|
||||
echo 1 > $instance/events/arm_smmu/enable
|
||||
|
||||
echo 1 > $instance/tracing_on
|
||||
}
|
||||
|
||||
# binder tracing can be noisy
|
||||
enable_binder_events()
|
||||
{
|
||||
local instance=/sys/kernel/tracing/instances/binder
|
||||
|
||||
mkdir $instance
|
||||
echo > $instance/trace
|
||||
echo > $instance/set_event
|
||||
|
||||
echo 1 > $instance/events/binder/enable
|
||||
|
||||
echo 1 > $instance/tracing_on
|
||||
}
|
||||
|
||||
enable_rwmmio_events()
|
||||
{
|
||||
if [ ! -d /sys/kernel/tracing/events/rwmmio ]
|
||||
then
|
||||
return
|
||||
fi
|
||||
|
||||
local instance=/sys/kernel/tracing/instances/rwmmio
|
||||
|
||||
mkdir $instance
|
||||
echo > $instance/trace
|
||||
echo > $instance/set_event
|
||||
|
||||
echo 1 > $instance/events/rwmmio/rwmmio_read/enable
|
||||
echo 1 > $instance/events/rwmmio/rwmmio_write/enable
|
||||
|
||||
echo 1 > $instance/tracing_on
|
||||
}
|
||||
|
||||
find_build_type()
|
||||
{
|
||||
linux_banner=`cat /proc/version`
|
||||
if [[ "$linux_banner" == *"-consolidate"* ]]
|
||||
then
|
||||
debug_build=true
|
||||
fi
|
||||
}
|
||||
|
||||
debug_build=false
|
||||
enable_tracing_events()
|
||||
{
|
||||
# bail out if its perf config
|
||||
find_build_type
|
||||
if [ "$debug_build" = false ]
|
||||
then
|
||||
return
|
||||
fi
|
||||
|
||||
# bail out if ftrace events aren't present
|
||||
if [ ! -d /sys/kernel/tracing/events ] ; then
|
||||
return
|
||||
fi
|
||||
|
||||
enable_sched_events
|
||||
enable_rproc_events
|
||||
enable_suspend_events
|
||||
enable_binder_events
|
||||
enable_clock_reg_events
|
||||
enable_memory_events
|
||||
enable_rwmmio_events
|
||||
}
|
||||
|
||||
enable_tracing_events
|
||||
45
rootdir/bin/init.qti.kernel.early_debug.sh
Normal file
45
rootdir/bin/init.qti.kernel.early_debug.sh
Normal file
@@ -0,0 +1,45 @@
|
||||
#=============================================================================
|
||||
# Copyright (c) 2022-2023 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
# Copyright (c) 2014-2017, The Linux Foundation. All rights reserved.
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions are met:
|
||||
# * Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# * Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in the
|
||||
# documentation and/or other materials provided with the distribution.
|
||||
# * Neither the name of The Linux Foundation nor
|
||||
# the names of its contributors may be used to endorse or promote
|
||||
# products derived from this software without specific prior written
|
||||
# permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
# NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
|
||||
# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
||||
# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
|
||||
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
|
||||
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
||||
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
|
||||
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
|
||||
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
#=============================================================================
|
||||
|
||||
if [ -f /sys/devices/soc0/soc_id ]; then
|
||||
platformid=`cat /sys/devices/soc0/soc_id`
|
||||
fi
|
||||
|
||||
case "$platformid" in
|
||||
"557"|"577"|"614"|"632")
|
||||
/vendor/bin/sh /vendor/bin/init.qti.kernel.early_debug-pineapple.sh
|
||||
;;
|
||||
|
||||
*)
|
||||
echo "***WARNING***: Invalid SoC ID\n\t Not running early debug scripts!!\n"
|
||||
;;
|
||||
esac
|
||||
40
rootdir/bin/init.qti.kernel.sh
Normal file
40
rootdir/bin/init.qti.kernel.sh
Normal file
@@ -0,0 +1,40 @@
|
||||
#! /vendor/bin/sh
|
||||
#=============================================================================
|
||||
# Copyright (c) 2019-2020 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
# Copyright (c) 2009-2012, 2014-2019, The Linux Foundation. All rights reserved.
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions are met:
|
||||
# * Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# * Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in the
|
||||
# documentation and/or other materials provided with the distribution.
|
||||
# * Neither the name of The Linux Foundation nor
|
||||
# the names of its contributors may be used to endorse or promote
|
||||
# products derived from this software without specific prior written
|
||||
# permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
# NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
|
||||
# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
||||
# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
|
||||
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
|
||||
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
||||
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
|
||||
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
|
||||
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
#=============================================================================
|
||||
|
||||
start_msm_irqbalance()
|
||||
{
|
||||
if [ -f /vendor/bin/msm_irqbalance ]; then
|
||||
start vendor.msm_irqbalance
|
||||
fi
|
||||
}
|
||||
start_msm_irqbalance
|
||||
42
rootdir/bin/system_dlkm_modprobe.sh
Normal file
42
rootdir/bin/system_dlkm_modprobe.sh
Normal file
@@ -0,0 +1,42 @@
|
||||
#! /vendor/bin/sh
|
||||
#=============================================================================
|
||||
# Copyright (c) 2022 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#=============================================================================
|
||||
|
||||
SYSTEM_DLKM_DIR="/system_dlkm/lib/modules"
|
||||
VENDOR_DLKM_DIR="/vendor_dlkm/lib/modules"
|
||||
|
||||
MODPROBE="/vendor/bin/modprobe"
|
||||
|
||||
for dir in ${SYSTEM_DLKM_DIR} ;
|
||||
do
|
||||
if [ ! -e ${dir}/*/modules.load ]; then
|
||||
continue
|
||||
fi
|
||||
if [ -e ${VENDOR_DLKM_DIR}/system_dlkm.modules.blocklist ] && grep -q blocklist ${VENDOR_DLKM_DIR}/system_dlkm.modules.blocklist; then
|
||||
blocklist_expr="$(sed -n -e 's/blocklist \(.*\)/\1/p' ${VENDOR_DLKM_DIR}/system_dlkm.modules.blocklist | sed -e 's/-/_/g' -e 's/^/-e /')"
|
||||
else
|
||||
# Use pattern that won't be found in modules list so that all modules pass through grep below
|
||||
blocklist_expr="-e %"
|
||||
fi
|
||||
# Filter out modules in blocklist - we would see unnecessary errors otherwise
|
||||
load_modules=$(cat ${dir}/*/modules.load | grep -w -v ${blocklist_expr})
|
||||
first_module=$(echo ${load_modules} | cut -d " " -f1)
|
||||
other_modules=$(echo ${load_modules} | cut -d " " -f2-)
|
||||
if ! ${MODPROBE} -b -s -d ${dir}/*/ -a ${first_module} > /dev/null ; then
|
||||
continue
|
||||
fi
|
||||
# load modules individually in case one of them fails to init
|
||||
for module in ${other_modules}; do
|
||||
( ${MODPROBE} -b -s -d ${dir}/*/ -a ${module} > /dev/null ) &
|
||||
done
|
||||
|
||||
wait
|
||||
|
||||
setprop odm.system.all.modules.ready 1
|
||||
exit 0
|
||||
done
|
||||
|
||||
exit 1
|
||||
61
rootdir/bin/vendor_modprobe.sh
Normal file
61
rootdir/bin/vendor_modprobe.sh
Normal file
@@ -0,0 +1,61 @@
|
||||
#! /vendor/bin/sh
|
||||
#=============================================================================
|
||||
# Copyright (c) 2019-2022 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#=============================================================================
|
||||
|
||||
VENDOR_DIR="/vendor/lib/modules"
|
||||
VENDOR_DLKM_DIR="/vendor_dlkm/lib/modules"
|
||||
|
||||
MODPROBE="/vendor/bin/modprobe"
|
||||
|
||||
# vendor modules partition could be /vendor/lib/modules or /vendor_dlkm/lib/modules
|
||||
POSSIBLE_DIRS="${VENDOR_DLKM_DIR} ${VENDOR_DIR}"
|
||||
audio_arch=`getprop ro.boot.audio`
|
||||
|
||||
for dir in ${POSSIBLE_DIRS} ;
|
||||
do
|
||||
if [ ! -e ${dir}/modules.load ]; then
|
||||
continue
|
||||
fi
|
||||
|
||||
if [ "$audio_arch" == "audioreach" ]; then
|
||||
if [ -e ${dir}/modules.audio.ar.blocklist ]; then
|
||||
audio_blocklist_expr="$(sed -n -e 's/blocklist \(.*\)/\1/p' ${dir}/modules.audio.ar.blocklist | sed -e 's/-/_/g' -e 's/^/-e /')"
|
||||
else
|
||||
audio_blocklist_expr="-e %"
|
||||
fi
|
||||
else
|
||||
if [ -e ${dir}/modules.audio.legacy.blocklist ]; then
|
||||
audio_blocklist_expr="$(sed -n -e 's/blocklist \(.*\)/\1/p' ${dir}/modules.audio.legacy.blocklist | sed -e 's/-/_/g' -e 's/^/-e /')"
|
||||
else
|
||||
audio_blocklist_expr="-e %"
|
||||
fi
|
||||
fi
|
||||
|
||||
if [ -e ${dir}/modules.blocklist ]; then
|
||||
blocklist_expr="$(sed -n -e 's/blocklist \(.*\)/\1/p' ${dir}/modules.blocklist | sed -e 's/-/_/g' -e 's/^/-e /')"
|
||||
else
|
||||
# Use pattern that won't be found in modules list so that all modules pass through grep below
|
||||
blocklist_expr="-e %"
|
||||
fi
|
||||
# Filter out modules in blocklist - we would see unnecessary errors otherwise
|
||||
load_modules=$(sed = ${dir}/modules.load | sed 'N;s/\n/\t/' | sort -uk2 | sort -nk1 | cut -f2- | grep -w -v ${blocklist_expr} | grep -w -v ${audio_blocklist_expr})
|
||||
first_module=$(echo ${load_modules} | cut -d " " -f1)
|
||||
other_modules=$(echo ${load_modules} | cut -d " " -f2-)
|
||||
if ! ${MODPROBE} -b -s -d ${dir} -a ${first_module} > /dev/null ; then
|
||||
continue
|
||||
fi
|
||||
# load modules individually in case one of them fails to init
|
||||
for module in ${other_modules}; do
|
||||
( ${MODPROBE} -b -d ${dir} -a ${module} > /dev/null ) &
|
||||
done
|
||||
|
||||
wait
|
||||
|
||||
setprop vendor.all.modules.ready 1
|
||||
exit 0
|
||||
done
|
||||
|
||||
exit 1
|
||||
386
rootdir/etc/init.qcom.factory.rc
Normal file
386
rootdir/etc/init.qcom.factory.rc
Normal file
@@ -0,0 +1,386 @@
|
||||
#
|
||||
# Copyright (c) 2009-2016, The Linux Foundation. All rights reserved.
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions are met:
|
||||
# * Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# * Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in the
|
||||
# documentation and/or other materials provided with the distribution.
|
||||
# * Neither the name of The Linux Foundation nor
|
||||
# the names of its contributors may be used to endorse or promote
|
||||
# products derived from this software without specific prior written
|
||||
# permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
# NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
|
||||
# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
||||
# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
|
||||
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
|
||||
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
||||
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
|
||||
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
|
||||
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
|
||||
# Define fastmmi
|
||||
service fastmmi /system_ext/bin/mmi
|
||||
user root
|
||||
group root
|
||||
disabled
|
||||
|
||||
service vendor.mmid /vendor/bin/mmid
|
||||
user root
|
||||
group root
|
||||
disabled
|
||||
|
||||
service mmi_diag /system_ext/bin/mmi_diag
|
||||
class main
|
||||
user root
|
||||
group root oem_2901
|
||||
disabled
|
||||
|
||||
on property:vendor.sys.boot_mode=ffbm && property:ro.build.type=userdebug
|
||||
write ${persist.vendor.mmi.misc_dev_path} "ffbm-01"
|
||||
|
||||
on property:vendor.sys.boot_mode=ffbm && property:ro.build.type=eng
|
||||
write ${persist.vendor.mmi.misc_dev_path} "ffbm-01"
|
||||
|
||||
on property:vendor.sys.boot_mode=qmmi && property:ro.build.type=userdebug
|
||||
write ${persist.vendor.mmi.misc_dev_path} "qmmi"
|
||||
|
||||
on property:vendor.sys.boot_mode=qmmi && property:ro.build.type=eng
|
||||
write ${persist.vendor.mmi.misc_dev_path} "qmmi"
|
||||
|
||||
on property:vendor.sys.boot_mode=normal && property:ro.build.type=userdebug
|
||||
write ${persist.vendor.mmi.misc_dev_path} "normal"
|
||||
|
||||
on property:vendor.sys.boot_mode=normal && property:ro.build.type=eng
|
||||
write ${persist.vendor.mmi.misc_dev_path} "normal"
|
||||
|
||||
# Creating a scratch storage on /data for factory testing.
|
||||
on factory-fs && property:ro.bootmode=ffbm-00 && property:ro.build.type=userdebug
|
||||
mount tmpfs tmpfs /data
|
||||
|
||||
on factory-fs && property:ro.bootmode=ffbm-00 && property:ro.build.type=eng
|
||||
mount tmpfs tmpfs /data
|
||||
|
||||
on factory-fs && property:ro.bootmode=ffbm-01 && property:ro.build.type=userdebug
|
||||
mount tmpfs tmpfs /data
|
||||
|
||||
on factory-fs && property:ro.bootmode=ffbm-01 && property:ro.build.type=eng
|
||||
mount tmpfs tmpfs /data
|
||||
|
||||
# aligned the usb port with system standard, otherwise if only diag be added
|
||||
# Then in QMMI mode, the whole Andoid be booted, but due to the ro.bootmode is
|
||||
# not normal/unknow, then when it apply the default funcs, it will turn to MTP
|
||||
# which cause the diag/Wwan/modem port all be lost in qmmi mode. Details:
|
||||
# UsbDeviceManager.java---->getDefaultFunctions and trySetEnabledFunctions
|
||||
on property:persist.vendor.usb.config=*
|
||||
setprop persist.sys.usb.qmmi.func ${persist.vendor.usb.config}
|
||||
|
||||
on mmi && property:ro.bootmode=ffbm-00
|
||||
# ========================================================
|
||||
# This is FFBM only settings.
|
||||
# ========================================================
|
||||
#mkdir for factory data files.
|
||||
mkdir /mnt/vendor/persist/FTM_AP 0750 system system
|
||||
|
||||
start fastmmi
|
||||
# start qcom-post-boot to set the misc partition path property value
|
||||
start qcom-post-boot
|
||||
start mmi_diag
|
||||
|
||||
on mmi && property:ro.bootmode=ffbm-01
|
||||
# ========================================================
|
||||
# This is FFBM only settings.
|
||||
# ========================================================
|
||||
#mkdir for factory data files.
|
||||
mkdir /mnt/vendor/persist/FTM_AP 0750 system system
|
||||
|
||||
start fastmmi
|
||||
## start qcom-post-boot to set the misc partition path property value
|
||||
start qcom-post-boot
|
||||
start mmi_diag
|
||||
|
||||
on property:persist.vendor.usb.config=* && property:ro.bootmode=ffbm-00 && property:ro.build.type=userdebug
|
||||
setprop sys.usb.config ${persist.vendor.usb.config}
|
||||
|
||||
on property:persist.vendor.usb.config=* && property:ro.bootmode=ffbm-00 && property:ro.build.type=eng
|
||||
setprop sys.usb.config ${persist.vendor.usb.config}
|
||||
|
||||
on property:persist.vendor.usb.config=* && property:ro.bootmode=ffbm-01 && property:ro.build.type=userdebug
|
||||
setprop sys.usb.config ${persist.vendor.usb.config}
|
||||
|
||||
on property:persist.vendor.usb.config=* && property:ro.bootmode=ffbm-01 && property:ro.build.type=eng
|
||||
setprop sys.usb.config ${persist.vendor.usb.config}
|
||||
|
||||
on property:persist.vendor.usb.config=* && property:ro.bootmode=ffbm-02 && property:ro.build.type=userdebug
|
||||
setprop sys.usb.config ${persist.vendor.usb.config}
|
||||
|
||||
on property:persist.vendor.usb.config=* && property:ro.bootmode=ffbm-02 && property:ro.build.type=eng
|
||||
setprop sys.usb.config ${persist.vendor.usb.config}
|
||||
|
||||
on property:persist.vendor.usb.config=* && property:ro.bootmode=qmmi && property:ro.build.type=userdebug
|
||||
setprop sys.usb.config ${persist.vendor.usb.config}
|
||||
|
||||
on property:persist.vendor.usb.config=* && property:ro.bootmode=qmmi && property:ro.build.type=eng
|
||||
setprop sys.usb.config ${persist.vendor.usb.config}
|
||||
|
||||
on ffbm
|
||||
trigger early-fs
|
||||
trigger factory-fs
|
||||
trigger fs
|
||||
trigger post-fs
|
||||
|
||||
# Mount fstab in init.{$device}.rc by mount_all with '--late' parameter
|
||||
# to only mount entries with 'latemount'. This is needed if '--early' is
|
||||
# specified in the previous mount_all command on the fs stage.
|
||||
# With /system mounted and properties form /system + /factory available,
|
||||
# some services can be started.
|
||||
trigger late-fs
|
||||
|
||||
# Now we can mount /data. File encryption requires keymaster to decrypt
|
||||
# /data, which in turn can only be loaded when system properties are present.
|
||||
trigger post-fs-data
|
||||
|
||||
# Now we can start zygote for devices with file based encryption
|
||||
trigger zygote-start
|
||||
|
||||
# Load persist properties and override properties (if enabled) from /data.
|
||||
trigger load_persist_props_action
|
||||
|
||||
# Remove a file to wake up anything waiting for firmware.
|
||||
trigger firmware_mounts_complete
|
||||
|
||||
trigger early-boot
|
||||
trigger boot
|
||||
trigger mmi
|
||||
|
||||
|
||||
# ========================================================
|
||||
# Start for audio TC
|
||||
# ========================================================
|
||||
|
||||
service vendor.audio_tc53 /vendor/bin/mm-audio-ftm -tc 53
|
||||
user audio
|
||||
group audio
|
||||
disabled
|
||||
oneshot
|
||||
|
||||
service vendor.audio_tc1 /vendor/bin/mm-audio-ftm -tc 1
|
||||
user audio
|
||||
group audio
|
||||
disabled
|
||||
oneshot
|
||||
|
||||
service vendor.audio_tc2 /vendor/bin/mm-audio-ftm -tc 2
|
||||
user audio
|
||||
group audio
|
||||
disabled
|
||||
oneshot
|
||||
|
||||
service vendor.audio_tc3 /vendor/bin/mm-audio-ftm -tc 3
|
||||
user audio
|
||||
group audio
|
||||
disabled
|
||||
oneshot
|
||||
|
||||
service vendor.audio_tc4 /vendor/bin/mm-audio-ftm -tc 4
|
||||
user audio
|
||||
group audio
|
||||
disabled
|
||||
oneshot
|
||||
|
||||
service vendor.audio_tc5 /vendor/bin/mm-audio-ftm -tc 5
|
||||
user audio
|
||||
group audio
|
||||
disabled
|
||||
oneshot
|
||||
|
||||
service vendor.audio_tc51 /vendor/bin/mm-audio-ftm -tc 51
|
||||
user audio
|
||||
group audio
|
||||
disabled
|
||||
oneshot
|
||||
|
||||
service vendor.audio_tc56 /vendor/bin/mm-audio-ftm -tc 56
|
||||
user audio
|
||||
group audio
|
||||
disabled
|
||||
oneshot
|
||||
|
||||
service vendor.audio_tc222 /vendor/bin/mm-audio-ftm -tc 222
|
||||
user audio
|
||||
group audio
|
||||
disabled
|
||||
oneshot
|
||||
|
||||
service vendor.audio_tc225 /vendor/bin/mm-audio-ftm -tc 225
|
||||
user audio
|
||||
group audio
|
||||
disabled
|
||||
oneshot
|
||||
|
||||
service vendor.audio_tc228 /vendor/bin/mm-audio-ftm -tc 228
|
||||
user audio
|
||||
group audio
|
||||
disabled
|
||||
oneshot
|
||||
|
||||
service vendor.audio_tc229 /vendor/bin/mm-audio-ftm -tc 229
|
||||
user audio
|
||||
group audio
|
||||
disabled
|
||||
oneshot
|
||||
|
||||
service vendor.audio_tc230 /vendor/bin/mm-audio-ftm -tc 230
|
||||
user audio
|
||||
group audio
|
||||
disabled
|
||||
oneshot
|
||||
|
||||
service vendor.audio_tc246 /vendor/bin/mm-audio-ftm -tc 246
|
||||
user audio
|
||||
group audio
|
||||
disabled
|
||||
oneshot
|
||||
|
||||
service vendor.audio_tc247 /vendor/bin/mm-audio-ftm -tc 247
|
||||
user audio
|
||||
group audio
|
||||
disabled
|
||||
oneshot
|
||||
|
||||
service vendor.audio_tc250 /vendor/bin/mm-audio-ftm -tc 250
|
||||
user audio
|
||||
group audio
|
||||
disabled
|
||||
oneshot
|
||||
|
||||
service vendor.audio_tc251 /vendor/bin/mm-audio-ftm -tc 251
|
||||
user audio
|
||||
group audio
|
||||
disabled
|
||||
oneshot
|
||||
|
||||
service vendor.audio_tc252 /vendor/bin/mm-audio-ftm -tc 252
|
||||
user audio
|
||||
group audio
|
||||
disabled
|
||||
oneshot
|
||||
|
||||
service vendor.audio_tc253 /vendor/bin/mm-audio-ftm -tc 253
|
||||
user audio
|
||||
group audio
|
||||
disabled
|
||||
oneshot
|
||||
|
||||
service vendor.audio_tc333 /vendor/bin/mm-audio-ftm -tc 333
|
||||
user audio
|
||||
group audio
|
||||
disabled
|
||||
oneshot
|
||||
|
||||
service vendor.audio_tc334 /vendor/bin/mm-audio-ftm -tc 334
|
||||
user audio
|
||||
group audio
|
||||
disabled
|
||||
oneshot
|
||||
|
||||
service vendor.audio_tc335 /vendor/bin/mm-audio-ftm -tc 335
|
||||
user audio
|
||||
group audio
|
||||
disabled
|
||||
oneshot
|
||||
|
||||
service vendor.audio_tc336 /vendor/bin/mm-audio-ftm -tc 336
|
||||
user audio
|
||||
group audio
|
||||
disabled
|
||||
oneshot
|
||||
|
||||
service vendor.audio_tc337 /vendor/bin/mm-audio-ftm -tc 337
|
||||
user audio
|
||||
group audio
|
||||
disabled
|
||||
oneshot
|
||||
|
||||
service vendor.audio_tc338 /vendor/bin/mm-audio-ftm -tc 338
|
||||
user audio
|
||||
group audio
|
||||
disabled
|
||||
oneshot
|
||||
|
||||
service vendor.audio_tc11 /vendor/bin/mm-audio-ftm -tc 11 -file /data/vendor/audio/ftm_headset_mic_record.wav
|
||||
user audio
|
||||
group audio
|
||||
disabled
|
||||
oneshot
|
||||
|
||||
service vendor.audio_tc16 /vendor/bin/mm-audio-ftm -tc 16 -file /data/vendor/audio/ftm_mic1_record.wav
|
||||
user audio
|
||||
group audio
|
||||
disabled
|
||||
oneshot
|
||||
|
||||
service vendor.audio_tc17 /vendor/bin/mm-audio-ftm -tc 17 -file /data/vendor/audio/ftm_mic2_record.wav
|
||||
user audio
|
||||
group audio
|
||||
disabled
|
||||
oneshot
|
||||
|
||||
service vendor.audio_tc18 /vendor/bin/mm-audio-ftm -tc 18 -file /data/vendor/audio/ftm_mic3_record.wav
|
||||
user audio
|
||||
group audio
|
||||
disabled
|
||||
oneshot
|
||||
|
||||
service vendor.audio_tc19 /vendor/bin/mm-audio-ftm -tc 19 -file /data/vendor/audio/ftm_mic4_record.wav
|
||||
user audio
|
||||
group audio
|
||||
disabled
|
||||
oneshot
|
||||
|
||||
service vendor.audio_tc20 /vendor/bin/mm-audio-ftm -tc 20 -file /data/vendor/audio/ftm_mic5_record.wav
|
||||
user audio
|
||||
group audio
|
||||
disabled
|
||||
oneshot
|
||||
|
||||
service vendor.audio_tc21 /vendor/bin/mm-audio-ftm -tc 21 -file /data/vendor/audio/ftm_mic6_record.wav
|
||||
user audio
|
||||
group audio
|
||||
disabled
|
||||
oneshot
|
||||
|
||||
service vendor.audio_tc101 /vendor/bin/mm-audio-ftm -tc 101 -file /data/vendor/audio/ftm_mic1_record.wav
|
||||
user audio
|
||||
group audio
|
||||
disabled
|
||||
oneshot
|
||||
|
||||
service vendor.audio_tc102 /vendor/bin/mm-audio-ftm -tc 102 -file /data/vendor/audio/ftm_mic2_record.wav
|
||||
user audio
|
||||
group audio
|
||||
disabled
|
||||
oneshot
|
||||
|
||||
service vendor.audio_tc103 /vendor/bin/mm-audio-ftm -tc 103 -file /data/vendor/audio/ftm_mic3_record.wav
|
||||
user audio
|
||||
group audio
|
||||
disabled
|
||||
oneshot
|
||||
|
||||
service vendor.audio_tc104 /vendor/bin/mm-audio-ftm -tc 104 -file /data/vendor/audio/ftm_mic4_record.wav
|
||||
user audio
|
||||
group audio
|
||||
disabled
|
||||
oneshot
|
||||
|
||||
# ========================================================
|
||||
# End for audio TC
|
||||
# ========================================================
|
||||
@@ -277,6 +277,12 @@ on post-fs-data
|
||||
# Create directory used by display clients
|
||||
mkdir /data/vendor/display 0770 system graphics
|
||||
|
||||
# Change lm related dirs
|
||||
mkdir /data/vendor/lm 0700 root root
|
||||
|
||||
# Create directory used by powermodule
|
||||
mkdir /data/vendor/pwr 0700 root root
|
||||
|
||||
# Create directory used by media clients
|
||||
mkdir /data/vendor/media 0770 mediacodec media
|
||||
|
||||
@@ -377,10 +383,18 @@ on post-fs-data
|
||||
mkdir /data/vendor/fm 0770 system system
|
||||
chmod 0770 /data/vendor/fm
|
||||
|
||||
#Create PERFD deamon related dirs
|
||||
mkdir /data/vendor/perfd 0770 root system
|
||||
chmod 2770 /data/vendor/perfd
|
||||
rm /data/vendor/perfd/default_values
|
||||
|
||||
mkdir /data/vendor/secure_element 0777 system system
|
||||
|
||||
mkdir /data/vendor/nfc 0770 nfc nfc
|
||||
|
||||
#Create IOP deamon related dirs
|
||||
mkdir /data/vendor/iop 0700 root system
|
||||
|
||||
# Mark the copy complete flag to not completed
|
||||
write /data/vendor/radio/copy_complete 0
|
||||
chown radio radio /data/vendor/radio/copy_complete
|
||||
@@ -432,6 +446,25 @@ service nqnfcinfo /system/vendor/bin/nqnfcinfo
|
||||
user system
|
||||
oneshot
|
||||
|
||||
service iop /system/vendor/bin/iop
|
||||
class main
|
||||
user root
|
||||
group root
|
||||
disabled
|
||||
socket iop seqpacket 0666 root system
|
||||
|
||||
service qcomsysd /system/vendor/bin/qcom-system-daemon
|
||||
class main
|
||||
user root
|
||||
group root diag oem_2901
|
||||
disabled
|
||||
|
||||
on property:persist.vendor.qcomsysd.enabled=1
|
||||
enable qcomsysd
|
||||
|
||||
on property:persist.vendor.qcomsysd.enabled=0
|
||||
stop qcomsysd
|
||||
|
||||
service vendor.ssr_setup /system/vendor/bin/ssr_setup
|
||||
oneshot
|
||||
disabled
|
||||
|
||||
2791
rootdir/etc/init.qcom.usb.rc
Normal file
2791
rootdir/etc/init.qcom.usb.rc
Normal file
File diff suppressed because it is too large
Load Diff
181
rootdir/etc/init.qti.kernel.rc
Normal file
181
rootdir/etc/init.qti.kernel.rc
Normal file
@@ -0,0 +1,181 @@
|
||||
#=============================================================================
|
||||
# Copyright (c) 2019-2023 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
# Copyright (c) 2009-2012, 2014-2019, The Linux Foundation. All rights reserved.
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions are met:
|
||||
# * Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# * Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in the
|
||||
# documentation and/or other materials provided with the distribution.
|
||||
# * Neither the name of The Linux Foundation nor
|
||||
# the names of its contributors may be used to endorse or promote
|
||||
# products derived from this software without specific prior written
|
||||
# permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
# NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
|
||||
# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
||||
# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
|
||||
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
|
||||
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
||||
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
|
||||
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
|
||||
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
#=============================================================================
|
||||
import /vendor/etc/init/hw/init.qti.kernel.test.rc
|
||||
|
||||
on early-init
|
||||
# Set the console loglevel to < KERN_WARN
|
||||
# Set the default message loglevel to KERN_INFO
|
||||
write /proc/sys/kernel/printk "4 6 1 7"
|
||||
|
||||
exec_start gki.modprobe
|
||||
# wait for system modules to be loaded first before loading vendor modules
|
||||
wait_for_prop odm.system.all.modules.ready 1
|
||||
start vendor.modprobe
|
||||
|
||||
# Mount tracefs in /sys/kernel/tracing as CONFIG_DEBUG_FS might be
|
||||
# disabled and /sys/kernel/debug/tracing might not be available
|
||||
mount tracefs tracefs /sys/kernel/tracing
|
||||
chmod 0755 /sys/kernel/tracing
|
||||
|
||||
chown root system /dev/kmsg
|
||||
chmod 0620 /dev/kmsg
|
||||
|
||||
write /proc/sys/kernel/sched_boost 1
|
||||
|
||||
write /proc/sys/kernel/firmware_config/force_sysfs_fallback 1
|
||||
|
||||
on post-fs
|
||||
wait_for_prop vendor.all.modules.ready 1
|
||||
|
||||
# Create cgroup mount point for memory
|
||||
mkdir /sys/fs/cgroup/memory/bg 0750 root system
|
||||
write /sys/fs/cgroup/memory/bg/memory.swappiness 140
|
||||
write /sys/fs/cgroup/memory/bg/memory.move_charge_at_immigrate 1
|
||||
chown root system /sys/fs/cgroup/memory/bg/tasks
|
||||
chmod 0660 /sys/fs/cgroup/memory/bg/tasks
|
||||
|
||||
# update scheduler tunables
|
||||
write /dev/cpuctl/foreground/cpu.uclamp.sched_boost_no_override 1
|
||||
write /dev/cpuctl/top-app/cpu.uclamp.sched_boost_no_override 1
|
||||
write /dev/cpuctl/background/cpu.uclamp.colocate 0
|
||||
write /dev/cpuctl/foreground/cpu.uclamp.colocate 0
|
||||
write /dev/cpuctl/top-app/cpu.uclamp.colocate 1
|
||||
|
||||
# set aggressive read ahead for dm-0 and dm-1 during boot up
|
||||
write /sys/block/dm-0/queue/read_ahead_kb 2048
|
||||
write /sys/block/dm-1/queue/read_ahead_kb 2048
|
||||
write /sys/block/dm-2/queue/read_ahead_kb 2048
|
||||
|
||||
on early-boot
|
||||
# Allow subsystem (modem etc) debugging
|
||||
exec_background u:r:vendor_qti_init_shell_bg:s0 -- /vendor/bin/init.qti.write.sh /sys/kernel/boot_adsp/boot 1
|
||||
exec_background u:r:vendor_qti_init_shell_bg:s0 -- /vendor/bin/init.qti.write.sh /sys/kernel/boot_cdsp/boot 1
|
||||
exec_background u:r:vendor_qti_init_shell_bg:s0 -- /vendor/bin/init.qti.write.sh /sys/devices/virtual/cvp/cvp/boot 1
|
||||
|
||||
on boot
|
||||
# Allow access to dload sysfs node
|
||||
chown root system /sys/kernel/dload/emmc_dload
|
||||
chmod 0660 /sys/kernel/dload/emmc_dload
|
||||
chown root system /dev/block/bootdevice/by-name/ramdump
|
||||
chmod 0660 /dev/block/bootdevice/by-name/ramdump
|
||||
chown root system /sys/kernel/dload/dload_mode
|
||||
chmod 0660 /sys/kernel/dload/dload_mode
|
||||
|
||||
# set the io-scheduler to bfq on all eMMC and SD devices
|
||||
write /sys/class/block/mmcblk0/queue/scheduler bfq
|
||||
write /sys/class/block/mmcblk1/queue/scheduler bfq
|
||||
|
||||
# update io-scheduler tunables
|
||||
write /sys/class/block/mmcblk0/queue/iosched/slice_idle 0
|
||||
write /sys/class/block/mmcblk1/queue/iosched/slice_idle 0
|
||||
|
||||
# Allow access to memory hotplug device attributes
|
||||
chown system system /sys/kernel/mem-offline/anon_migrate
|
||||
|
||||
on post-fs-data
|
||||
# Create directory used for dump collection
|
||||
mkdir /data/vendor/ssrdump 0770 root system
|
||||
|
||||
on property:persist.sys.ssr.enable_debug=*
|
||||
write /sys/module/subsys_pil_tz/parameters/enable_debug ${persist.sys.ssr.enable_debug}
|
||||
|
||||
on property:persist.sys.mba_boot_timeout=*
|
||||
write /sys/module/pil_msa/parameters/pbl_mba_boot_timeout_ms ${persist.sys.mba_boot_timeout}
|
||||
|
||||
on property:persist.sys.modem_auth_timeout=*
|
||||
write /sys/module/pil_msa/parameters/modem_auth_timeout_ms ${persist.sys.modem_auth_timeout}
|
||||
|
||||
on property:persist.sys.pil_proxy_timeout=*
|
||||
write /sys/module/peripheral_loader/parameters/proxy_timeout_ms ${persist.sys.pil_proxy_timeout}
|
||||
|
||||
on property:persist.vendor.ssr.enable_ramdumps=1
|
||||
write /sys/module/subsystem_restart/parameters/enable_ramdumps 1
|
||||
|
||||
on property:persist.vendor.ssr.enable_ramdumps=0
|
||||
write /sys/module/subsystem_restart/parameters/enable_ramdumps 0
|
||||
|
||||
on property:persist.vendor.sys.rawdump_copy=1
|
||||
write /sys/kernel/dload/emmc_dload 1
|
||||
|
||||
on property:persist.vendor.sys.rawdump_copy=0
|
||||
write /sys/kernel/dload/emmc_dload 0
|
||||
|
||||
service kernel-boot /vendor/bin/sh /vendor/bin/init.qti.kernel.sh
|
||||
class core
|
||||
user root
|
||||
group root
|
||||
disabled
|
||||
oneshot
|
||||
|
||||
service kernel-post-boot /vendor/bin/sh /vendor/bin/init.kernel.post_boot.sh
|
||||
class core
|
||||
user root
|
||||
group root system wakelock graphics
|
||||
disabled
|
||||
oneshot
|
||||
|
||||
on property:sys.boot_completed=1
|
||||
write /dev/kmsg "Boot completed "
|
||||
#Reset read ahead for dm-0, dm-1 and dm-2 to 512kb
|
||||
write /sys/block/dm-0/queue/read_ahead_kb 512
|
||||
write /sys/block/dm-1/queue/read_ahead_kb 512
|
||||
write /sys/block/dm-2/queue/read_ahead_kb 512
|
||||
write /proc/sys/vm/page-cluster 0
|
||||
start kernel-boot
|
||||
start kernel-post-boot
|
||||
|
||||
on charger
|
||||
start kernel-post-boot
|
||||
|
||||
service vendor.msm_irqbalance /vendor/bin/msm_irqbalance -f /system/vendor/etc/msm_irqbalance.conf
|
||||
class core
|
||||
user root
|
||||
group root
|
||||
disabled
|
||||
|
||||
service gki.modprobe /vendor/bin/system_dlkm_modprobe.sh
|
||||
class main
|
||||
user root
|
||||
group root system
|
||||
disabled
|
||||
stdio_to_kmsg
|
||||
seclabel u:r:vendor_modprobe:s0
|
||||
oneshot
|
||||
|
||||
service vendor.modprobe /vendor/bin/vendor_modprobe.sh
|
||||
class main
|
||||
user root
|
||||
group root system
|
||||
disabled
|
||||
stdio_to_kmsg
|
||||
seclabel u:r:vendor_modprobe:s0
|
||||
oneshot
|
||||
52
rootdir/etc/init.samsung.factory.rc
Normal file
52
rootdir/etc/init.samsung.factory.rc
Normal file
@@ -0,0 +1,52 @@
|
||||
# Copyright (c) 2019-2024, The Linux Foundation. All rights reserved.
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions are
|
||||
# met:
|
||||
# * Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# * Redistributions in binary form must reproduce the above
|
||||
# copyright notice, this list of conditions and the following
|
||||
# disclaimer in the documentation and/or other materials provided
|
||||
# with the distribution.
|
||||
# * Neither the name of The Linux Foundation nor the names of its
|
||||
# contributors may be used to endorse or promote products derived
|
||||
# from this software without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
|
||||
# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
|
||||
# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
|
||||
# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
||||
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
|
||||
# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
||||
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
|
||||
# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
|
||||
# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
#
|
||||
|
||||
|
||||
on early-init
|
||||
|
||||
on init
|
||||
|
||||
on late-init
|
||||
|
||||
on post-fs
|
||||
|
||||
on late-fs
|
||||
|
||||
on post-fs-data
|
||||
|
||||
on boot
|
||||
|
||||
on shutdown
|
||||
|
||||
# service definition
|
||||
|
||||
# on property triggers
|
||||
|
||||
on early-boot && property:ro.binary.type=factory
|
||||
umount /product/vm-system
|
||||
@@ -114,6 +114,3 @@ service factory_ssc /vendor/bin/factory.ssc
|
||||
|
||||
on property:sys.boot_completed=1
|
||||
setprop ro.factory.sensor.delay.init 1
|
||||
|
||||
# Enable PowerHAL hint processing
|
||||
setprop vendor.powerhal.init 1
|
||||
|
||||
@@ -143,6 +143,8 @@ on post-fs && property:ro.boot.factory.interposer=0
|
||||
start vendor.qvirtservice
|
||||
|
||||
on late-fs
|
||||
wait_for_prop hwservicemanager.ready true
|
||||
#exec_start wait_for_keymaster
|
||||
mount_all /vendor/etc/fstab.qcom --late
|
||||
|
||||
on post-fs-data
|
||||
@@ -271,16 +273,3 @@ service fan_control_turn_off /vendor/bin/fan_service 0
|
||||
user root
|
||||
disabled
|
||||
oneshot
|
||||
|
||||
service vendor.audio-hal /vendor/bin/hw/android.hardware.audio.service
|
||||
override
|
||||
class hal
|
||||
user audioserver
|
||||
# media gid needed for /dev/fm (radio) and for /data/misc/media (tee)
|
||||
group audio camera drmrpc inet media mediadrm net_bt net_bt_admin net_bw_acct oem_2901 wakelock oem_2912
|
||||
capabilities BLOCK_SUSPEND SYS_NICE
|
||||
# setting RLIMIT_RTPRIO allows binder RT priority inheritance
|
||||
rlimit rtprio 10 10
|
||||
ioprio rt 4
|
||||
task_profiles ProcessCapacityHigh HighPerformance
|
||||
onrestart restart audioserver
|
||||
|
||||
Reference in New Issue
Block a user