e3q: Initial commit

rootdir/bin/qca6234-service.sh

@@ -0,0 +1,87 @@
+#! /vendor/bin/sh
+
+# Copyright (c) 2010-2014, The Linux Foundation. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are
+# met:
+#    * Redistributions of source code must retain the above copyright
+#      notice, this list of conditions and the following disclaimer.
+#    * Redistributions in binary form must reproduce the above
+#      copyright notice, this list of conditions and the following
+#      disclaimer in the documentation and/or other materials provided
+#      with the distribution.
+#    * Neither the name of The Linux Foundation nor the names of its
+#      contributors may be used to endorse or promote products derived
+#      from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
+# ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
+# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# Check whether device is plugged on the HSIC bus
+# Currently HSIC bus will be the first index
+
+PATH=/sbin:/system/sbin:/system/bin:/system/xbin
+export PATH
+
+deviceprop=`getprop ro.baseband`
+boardprop=`getprop ro.board.platform`
+
+if [ -e /sys/bus/platform/drivers/msm_hsic_host ]; then
+    if [ ! -L /sys/bus/usb/devices/1-1 ]; then
+        echo msm_hsic_host > /sys/bus/platform/drivers/msm_hsic_host/unbind
+    fi
+
+    chown -h system.system /sys/bus/platform/drivers/msm_hsic_host/bind
+    chown -h system.system /sys/bus/platform/drivers/msm_hsic_host/unbind
+    chmod -h 0200 /sys/bus/platform/drivers/msm_hsic_host/bind
+    chmod -h 0200 /sys/bus/platform/drivers/msm_hsic_host/unbind
+fi
+
+wlanchip=""
+
+if [ "$deviceprop" == "apq" ] && [ "$boardprop" == "msm8974" ]; then
+    wlanchip="AR6004-USB"
+fi
+
+# force ar6004 is ar6004_wlan.conf existed.
+if [ -f /system/etc/firmware/ath6k/AR6004/ar6004_wlan.conf ]; then
+    wlanchip=`cat /system/etc/firmware/ath6k/AR6004/ar6004_wlan.conf`
+fi
+
+echo "The WLAN Chip ID is $wlanchip"
+if [ "$wlanchip" == "AR6004-USB" ]; then
+    echo msm_hsic_host > /sys/bus/platform/drivers/msm_hsic_host/unbind
+    setprop wlan.driver.ath 2
+    setprop vendor.bluetooth.soc ath3k
+    setprop wlan.driver.name /system/lib/modules/ath6kl-3.5/ath6kl_usb.ko
+    setprop wlan.supp.template /system/etc/wifi/wpa_supplicant_ath6kl.conf
+    btsoc="ath3k"
+elif [ "$wlanchip" == "AR6004-SDIO" ]; then
+    setprop wlan.driver.ath 2
+    setprop vendor.bluetooth.soc ath3k
+    setprop wlan.driver.name /system/lib/modules/ath6kl-3.5/ath6kl_sdio.ko
+    setprop wlan.supp.template /system/etc/wifi/wpa_supplicant_ath6kl.conf
+    btsoc="ath3k"
+
+    # Chown polling nodes as needed from UI running on system server
+    chmod -h 0200 /sys/devices/msm_sdcc.1/polling
+    chmod -h 0200 /sys/devices/msm_sdcc.2/polling
+    chmod -h 0200 /sys/devices/msm_sdcc.3/polling
+    chmod -h 0200 /sys/devices/msm_sdcc.4/polling
+
+    chown -h system.system /sys/devices/msm_sdcc.1/polling
+    chown -h system.system /sys/devices/msm_sdcc.2/polling
+    chown -h system.system /sys/devices/msm_sdcc.3/polling
+    chown -h system.system /sys/devices/msm_sdcc.4/polling
+fi
+